journal article·2011-02

A Nanoscale Study of Dislocation Nucleation at the Crack Tip in the Nickel-Hydrogen System

K. N. Solanki, D. K. Ward, D. J. Bammann

Publisher page

Abstract

Strengthening and embrittlement are controlled by the interactions between dislocations and hydrogen (H)–induced defect structures that can inversely affect the deformation mechanisms in materials. Here we present a simulation framework to understand fundamental issues associated with H-assisted dislocation nucleation and mobility using Monte Carlo (MC) and molecular dynamics (MD). In order to study the interaction between H and dislocations and its effect on material failure, we extensively examined mode I loading of an edge crack using MD simulations. The MD calculations of the total structural energy in the nickel (Ni)–H system shows that H atoms prefer to occupy octahedral interstitial sites in the fcc Ni lattice. As H concentration is increased, the Young’s modulus and the energy required to create free surface decreased, resulting in H-enhanced localized plasticity. The MD simulations also indicate that H not only facilitates dislocation emission from the crack tip but also enhances dislocation mobility, leading to softening of the material ahead of the crack tip. While the decrease in surface energy suggests H embrittlement, the increase in local plasticity induces crack blunting and prohibits crack propagation. The mechanisms responsible for transitioning from a ductile to brittle crack behavior clearly depend on the H concentration and its proximity to the crack tip. Enhanced plasticity will occur within a general field of H atoms that results in lower stacking fault and surface energies, yet H interstitials on preferential slip planes can inhibit dislocation nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. S.P. Lynch: Scripta Metall., 1979, vol. 13, pp. 1051–56.10.1016/0036-9748(79)90202-3 ↗
2. S.P. Lynch: J. Mater. Sci., 1986, vol. 21, pp. 692–70410.1007/BF01145543 ↗
3. H. Vehoff and W. Rothe: Acta Metall., 1983, vol. 31, pp. 1781–93.10.1016/0001-6160(83)90125-6 ↗
4. H. Vehoff and H.K. Klameth: Acta Metall., 1985, vol. 33, pp. 955–6210.1016/0001-6160(85)90189-0 ↗
5. J.W. Davenport and P.H. Estrup: in The Chemical Physics of Solid Surfaces and Heterogeneous Catalysis, D.A. King and D.P. Woodruff, eds., Elsevier, Amsterdam, 1990, vol. 3 (1), pp. 1–37.
6. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
7. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A–Struct., 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
8. P. Sofronis, Y. Liang, and N. Aravas: Eur. J. Mech. A/Solids, 2001, vol. 20, pp. 857–72.10.1016/S0997-7538(01)01179-2 ↗
9. Y. Liang and P. Sofronis: J. Mech. Phys. Solids, 2003, vol. 51 (8), pp. 1509–31.10.1016/S0022-5096(03)00052-8 ↗
10. I.M. Robertson: Eng. Fract. Mech., 2001, vol. 68, pp. 671–92.10.1016/S0013-7944(01)00011-X ↗
11. I.M. Robertson and H.K. Birnbaum: Acta Metall., 1986, vol. 34, pp. 353–66.10.1016/0001-6160(86)90071-4 ↗
12. I.L. Kwon and R.J. Asaro: Acta Metall. Mater., 1980, vol. 38 (8), pp. 1595–1606.10.1016/0956-7151(90)90127-3 ↗
13. D.S. Shih, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
14. P. Sofronis and H.K. Birnbaum: J. Mech. Phys. Solids, 1995, vol. 43, pp. 49–90.10.1016/0022-5096(94)00056-B ↗
15. Y. Liang, P. Sofronis, and N. Aravas: Acta Mater., 2003, vol. 51, pp. 2717–30.10.1016/S1359-6454(03)00081-8 ↗
16. Y. Liang, P. Sofronis, and R. Dodds: Mater. Sci. Eng. A, 2004, vol. 366 (2), pp. 397–411.10.1016/j.msea.2003.09.052 ↗
17. H. Kimura and H. Matsui: Proc. 3rd Int. Conf. on Effect of Hydrogen on Behavior of Materials, TMS-AIME, Warrendale, PA, 1980, pp. 191–208.
18. K.S. Shin, C.G. Park, and M. Meshii: Proc. 3rd Int. Conf. on Effect of Hydrogen on Behavior of Materials, TMS-AIME, Warrendale, PA, 1980, pp. 209–18.
19. P. Sofronis and J. Lufrano: Mater. Sci. Eng. A, 1999, vol. 260 (1), pp. 41–47(7)10.1016/S0921-5093(98)00982-4 ↗
20. J. Lufrano, P. Sofronis, and H.K. Birnbaum: J. Mech. Phys. Solids, 1996, vol. 44 (2), pp. 179–205.10.1016/0022-5096(95)00075-5 ↗
21. T. Tabata and H.K. Birnbaum: Scripta Metall., 1983, vol. 17, pp. 947–50.10.1016/0036-9748(83)90268-5 ↗
22. T. Tabata and H.K. Birnbaum: Scripta Metall., 1984, vol. 18, pp. 231–36.10.1016/0036-9748(84)90513-1 ↗
23. Y. Liang and P. Sofronis: Model. Simul. Mater. Sci. Eng., 2003, vol. 11, pp. 523–51.10.1088/0965-0393/11/4/308 ↗
24. G.M. Bond, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1987, vol. 35, pp. 2289–96.10.1016/0001-6160(87)90076-9 ↗
25. G.M. Bond, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 2193–97.10.1016/0001-6160(88)90320-3 ↗
26. P. Rozenak, I.M. Robertson, and H.K. Birnbaum: Acta Metall. Mater., 1990, vol. 38, pp. 2031–40.10.1016/0956-7151(90)90070-W ↗
27. A. Kimura and H.K. Birnbaum: Acta Metall., 1988, vol. 36 (3), pp. 757–66.10.1016/0001-6160(88)90109-5 ↗
28. M.R. Louthan, G.R. Caskey, Jr., J.A. Donovan, Jr., and D.E. Rawl, Jr.: Mater. Sci. Eng., ASM, Metals Park, OH, 1972, vol. 10 (6), pp. 357–68.10.1016/0025-5416(72)90109-7 ↗
29. R.A. Oriani: Acta Metall., 1970, vol. 18 (1), pp. 147–57.10.1016/0001-6160(70)90078-7 ↗
30. R.A. Oriani and P.H. Josephic: Acta Metall., 1979, vol. 27 (6), pp. 997–1005.10.1016/0001-6160(79)90187-1 ↗
31. T.D. Lee, T. Goldenberg, and J.P. Hirth: Metall. Trans. A, 1979, vol. 10A, pp. 199–208.10.1007/BF02817629 ↗
32. A.W. Thompson: Scripta Metall., 1982, vol. 16 (10), pp. 1189–92.10.1016/0036-9748(82)90094-1 ↗
33. C.P. You, A.W. Thompson, and I.M. Bernstein: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 407–15.10.1007/BF02664677 ↗
34. D.J. Bammann, P. Sofronis, and P. Novak: 2005 Proc. Int. Conf. on Fracture, Turin, Italy, 2005, p. 577.
35. A. Ramasubramaniam, M. Itakura, and E.A. Carter: Phys. Rev. B, 2009, vol. 79, p. 17410110.1103/PhysRevB.79.174101 ↗
36. X. Xu, M. Wen, Z. Hu, S. Fukuyama, and K. Yokogawa: Comput. Mater. Sci., 2003, vol. 23, pp. 131–38.10.1016/S0927-0256(01)00217-8 ↗
37. M.Q. Chandler, M.F. Horstemeyer, M.I. Baskes, P.M. Gullett, G.J. Wagner, and B. Jelinek: Acta Mater., 2008, vol. 56, pp. 95–10410.1016/j.actamat.2007.09.012 ↗
38. M.Q. Chandler, M.F. Horstemeyer, M.I. Baskes, G.J. Wanger, P.M. Gullett, and B. Jelinek: Acta Mater., 2008, vol. 56, pp. 619–3110.1016/j.actamat.2007.10.037 ↗
39. V.V. Bulatov and E. Kaxiras: Phys. Rev. Lett., 1997, vol. 78, pp. 4221–24.10.1103/PhysRevLett.78.4221 ↗
40. K.N. Solanki, M.F. Horstemeyer, M.I. Baskes, and H. Fang: Mech. Mater., 2005, vol. 37 (2–3), pp. 317–30.10.1016/j.mechmat.2003.08.014 ↗
41. M.F. Horstemeyer, M.I. Baskes, V.C. Prantil, J. Philliber, and S. Vonderheide: Model. Simul. Mater. Sci. Eng., 2003, vol. 11, pp. 265–86.10.1088/0965-0393/11/3/301 ↗
42. S. Plimpton: J. Comp. Phys., 1995, vol. 117, pp. 1–19.10.1006/jcph.1995.1039 ↗
43. M.S. Daw and M.I. Baskes: Phys. Rev. Lett., 1983, vol. 50, pp. 1285–88.10.1103/PhysRevLett.50.1285 ↗
44. S.M. Foiles, M.S. Daw, and W.D. Wilson: TMS-AIME, 1984, p. 275.
45. J.E. Angelo, N.R. Moody, and M.I. Baskes: Model. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 289–307.10.1088/0965-0393/3/3/001 ↗
46. G.W. Hoover: Phys. Rev. A, 1985, vol. 31, pp. 1695–97.10.1103/PhysRevA.31.1695 ↗
47. G.W. Hoover: Phys. Rev. A, 1986, vol. 34, pp. 2499–500.10.1103/PhysRevA.34.2499 ↗
48. L. Verlet: Phys. Rev., 1967, vol. 159, pp. 98–103.10.1103/PhysRev.159.98 ↗
49. S.C. Chang and J.P. Hirth: Metall. Trans. A, 1985, vol. 26A, pp. 1417–25.10.1007/BF02658674 ↗
50. H. Fang, M.F. Horstemeyer, M.I. Baskes, and K.N. Solanki: Comput. Meth. Appl. Mech. Eng., 2004, vol. 193 (17–20), pp. 1789–1802.10.1016/j.cma.2003.12.052 ↗
51. V. Yamakov, D. Wolf, M. Salazar, S.R. Phillpot, and H. Gleiter: Acta Mater., 2001, vol. 49, pp. 2713–22.10.1016/S1359-6454(01)00167-7 ↗
52. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Nat. Mater., 2002, vol. 1, p. 45.10.1038/nmat700 ↗
53. V. Yamakov, D. Wolf, S.R. Phillpot, and H. Gleiter: Acta Mater., 2003, vol. 51, pp. 4135–47.10.1016/S1359-6454(03)00232-5 ↗
54. C.L. Kelchner, S. Plimpton, J. Hamilton: Phys. Rev. B, 1998, vol. 58, pp. 11085–88.10.1103/PhysRevB.58.11085 ↗
55. J.R. Rice: J. Mech. Phys. Solids, 1978, vol. 26, pp. 61–78.10.1016/0022-5096(78)90014-5 ↗
56. D.K. Ward, W.A. Curtin, and Y. Qi: Comp. Sci. Technol., 2006, vol. 66, pp. 1151–61.10.1016/j.compscitech.2005.10.024 ↗
57. M.S. Daw and M.I. Baskes: Phys. Rev. B, 1984, vol. 29, pp. 6443–53.10.1103/PhysRevB.29.6443 ↗