journal article·2003-12

Hot working and recrystallization of as-cast 317L

Martin C. Mataya, Eric R. Nilsson, Elliot L. Brown, George Krauss

Publisher page

Abstract

Stress-strain behavior and microstructure evolution during hot working of as-cast austenitic stainless steel alloy 317L is investigated by uniaxial compression of cylindrical specimens at a strain rate of 1 s−1 over the temperature range 1000 °C to 1150 °C and up to a strain of one. The measured flow curves show little strain hardening, attributed in part to the high stacking fault energy (SFE) of the alloy. Dynamic recrystallization is not observed. Static recrystallization is observed to nucleate within the austenite matrix in the dendrite cores at dislocation microbands and in austenite immediately adjacent to a vermicular microconstituent, composed primarily of sigma and austenite and, occasionally, some delta ferrite. The recrystallization kinetics of 317L are retarded compared to as-cast 316L steel. The relatively sluggish recrystallization behavior is attributed in part to the higher SFE of 317L, which favors recovery over recrystallization, and in part to gradients in chemical composition and SFE, not found in 316L, in the dendritic microstructure. Thus, in the austenite near the interphase boundary, with high SFE, recovery initially replaced recrystallization, in contrast to recrystallization in the austenite more distant from the boundary. The recrystallization kinetics of both as-cast 317L and 316L were relatively slow compared to wrought stainless steels of comparative grain size and SFE, presumably due to the crystallographic texture and associated relatively low flow stress in the former materials. A kinetic model for recrystallization in as-cast 317L is developed and utilized to simulate evolution of the first cycle of recrystallization during various thermal-mechanical treatment schedules typically employed during primary breakdown of as-cast material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. H.J. McQueen and J.J. Jonas: J. Appl. Metalworking, 1984, vol. 3 (3), pp. 233–41.10.1007/BF02833651 ↗
2. W. Roberts: in Deformation, Processing and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 109–84.
3. G.T. Campbell, JR., E.P. Abrahamson, and N.J. Grant: Metall. Trans., 1974, vol. 5, pp. 1875–81.10.1007/BF02644154 ↗
4. R.H. Kane: in The Hot Deformation of Austenite, J.B. Balance, ed., AIME, New York, NY, 1977, pp. 457–98.
5. M.C. Mataya, E.R. Nilsson, E.L. Brown, and G. Krauss: Metall. Mater. Trans. A, 2003, vol. 34A, no. 8, pp. 1683–1703.10.1007/s11661-003-0313-8 ↗
6. M.C. Mataya and V.E. Sackschewsky: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2737–52.10.1007/BF02649226 ↗
7. D.J. Long and W.T. Delong: Welding J., 1973, vol. 52 (7) pp. 281s-97s.
8. D. Kotecki and T.A. Siewert: Welding J., 1992, vol. 71 (5), pp. 171s-79s.
9. N. Suutala: Metall. Trans. A, 1982, vol. 14A, pp. 191–97.
10. O. Hammer and U. Svennson: Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 401–10.
11. E.L. Brown: in Materials Studies for Magnetic Fusion Energy Applications at Low Temperatures—IV, National Bureau of Standards, Boulder, CO, 1981, pp. 357–414.
12. E.F. Boultbee and G.A. Schofield: in Typical Microstructures of Cast Metals, Institute of British Foundrymen Publications, Birmingham, England, 1981, pp. 210–15.
13. K. Kuo: J. Iron Steel Inst., 1954, Apr., pp. 433–41.
14. N.D. Ryan, H.J. McQueen, and J.J. Jonas: Can. Metall. Q., 1983, vol. 22 (3), pp. 369–78.10.1179/cmq.1983.22.3.369 ↗
15. S.A. Saltykov: in Stereology, H. Elias, ed., Springer-Verloag, New York, NY, 1967.
16. E.L. Brown, M.E. Burnett, P.T. Purtscher, and G. Krauss: Metall. Trans. A, 1983, vol. 14A, pp. 791–800.10.1007/BF02644282 ↗
17. P. Duwez and S.R. Baen: Journal of Metals, 1951, vol. 3, no. 4, pp. 331–335.
18. S. Takeda and N. Yukawa: J. Jpn. Inst. Met., 1957, vol. 21, p. 275.10.2320/jinstmet1952.21.4_275 ↗
19. B. Weiss and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851–66.10.1007/BF02647659 ↗
20. P.A. Blenkinsop and J. Nutting: J. Iron Steel Inst., 1967, vol. 205, p. 953.
21. C.J. Novak: in Handbook of Stainless Steels, D. Peckner and I.M. Bernstein, eds., McGraw-Hill, Inc., New York, NY, 1977, p. 63.
22. C.J. Bechtoldt and H.C. Vacher: J. Res. NBS, 1953, vol. 58 (1), p. 7.
23. H. Their, A. Baumel, and E. Schmidtmann: Arch. Eisenhuttenwes., 1969, vol. 40 (4), p. 333.
24. M.C. Mataya, M.L. Robinson, D. Chang, M.J. Weis, G.R. Edwards, and D.K. Matlock: 29th Mechanical Working and Steel Processing Conf. Proc., ISS-AIME, Toronto, 1987, vol. XXV, pp. 235–48.
25. E.R. Nilsson: Master’s Thesis, Colorado School of Mines, Golden, CO, 2000.
26. N.D. Ryan and H.J. McQueen: New Developments in Stainless Steel Technology, ASM, Metals Park, OH, 1985, pp. 293–304.
27. M.C. Mataya, E.L. Brown, and M.P. Riendeau: Metall. Trans. A, 1990, vol. 21A, pp. 1969–87.10.1007/BF02647245 ↗
28. H. Hu, B.B. Rath, and R.A. Vandermeer: in Recrystallization ’90, T. Chandra, ed., TMS, Warrendale, PA, 1990, pp. 3–16.
29. C.M. Sellars and J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–94.10.1016/0036-9748(79)90290-4 ↗
30. D.J. Towle and T. Gladman: Met. Sci., 1979, vol. 13, pp. 246–56.
31. I. Kozasu and T. Shimizu: Trans. Iron Steel Inst., Jpn, 1971, vol. 11, p. 35910.2355/isijinternational1966.11.359 ↗
32. D.R. Barraclough and C.M. Sellars: Met. Sci., 1979, March–April, pp. 257–67.10.1179/msc.1979.13.3-4.257 ↗
33. D.T. Llewellyn: Mater. Sci. Technol., 1997, vol. 13, pp. 389–400.10.1179/mst.1997.13.5.389 ↗
34. K.A. Bywater and T. Gladman: Met. Technol., 1976, pp. 358–65.10.1179/030716976803392169 ↗
35. B. Ahlblom and R. Sandstrom: Int. Met. Rev., 1982, No. 1, pp. 1–27.10.1179/imr.1982.27.1.1 ↗
36. M.J. Stewart: Metall. Trans. A, 1975, vol. 6A, pp. 1672–74.10.1007/BF02641988 ↗
37. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–50.10.1007/BF02641927 ↗
38. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Tarrytown, NY, 1995, pp. 363–90.