journal article·2016-03

Measurement and Modeling of Hydrogen Environment-Assisted Cracking in a Ni-Cu-Al-Ti Superalloy

James T. Burns, Zachary D. Harris, Justin D. Dolph, Richard P. Gangloff

Publisher page

Abstract

This research improves H decohesion mechanism-based modeling of intergranular stress corrosion cracking in a Ni-Cu superalloy, Monel K-500. New cracking data plus improved model parameters lead to accurate predictions of the cathodic potential dependencies of K TH and H diffusion-limited da/dt II for Monel K-500 under slow-rising K in 0.6 M NaCl solution. Experiments and modeling demonstrate that IGSCC is eliminated for applied potentials more positive than a critical level between −900 and −840 mVSCE, but slow-subcritical cracking persists by a microvoid-based mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. R.P. Gangloff, H. Ha, J.T. Burns, and J.R. Scully: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 3814–34. Erratum: vol. 45A, 2014, p. 4724.10.1007/s11661-014-2324-z ↗
2. R.P. Gangloff: in Hydrogen Effects on Materials, B.P. Somerday, P. Sofronis, and R.H. Jones, eds., ASM International, Materials Park, 2009, pp. 1–21.
3. R.P. Wei: Fracture Mechanics, Integration of Mechanics, Materials Science and Chemistry, Cambridge University Press, New York, 2010.10.1017/CBO9780511806865 ↗
4. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B. Karihaloo, eds., Elsevier Science, New York, 2003, vol. 6, pp. 31–101.
5. B.A. Kehler and J.R. Scully: Corrosion, 2008, vol. 64, pp. 465–77.10.5006/1.3278484 ↗
6. R.A. Oriani: Corrosion, 1987, vol. 43, pp. 390–97.10.5006/1.3583875 ↗
7. W.W. Gerberich, R.A. Oriani, M.-J. Lii, X. Chen, and T. Foecke: Philos. Mag. A, 1991, vol. 62, pp. 363–76.10.1080/01418619108204854 ↗
8. Y. Katz, N. Tymiak, and W.W. Gerberich: Eng. Fract. Mech., 2001, vol. 68, pp. 619–46.10.1016/S0013-7944(00)00119-3 ↗
9. W.W. Gerberich: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, 2012, vol. 1, pp. 209–46.
10. R.P. Gangloff: in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R.E. Ricker, G.S. Was, and R.H. Jones, eds., The Minerals, Metals & Materials Society, Warrendale, 2003, pp. 477–97.
11. P.G. Marsh and W.W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 613–9.10.1016/0956-7151(94)90257-7 ↗
12. H. Huang and W.W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 639–47.10.1016/0956-7151(94)90260-7 ↗
13. J.P. Hirth, Metall. Trans. A, vol. 11A, 1980, pp. 861-90.10.1007/BF02654700 ↗
14. J. Ai, H. Ha, R.P. Gangloff, and J.R. Scully, Acta mater., vol. 61, 2013, pp. 3186-99.10.1016/j.actamat.2013.02.007 ↗
15. J.D. Dolph: MS Thesis, University of Virginia, Charlottesville, 2015.
16. J.D. Dolph and J.R. Burns, unpublished research, University of Virginia, Charlottesville, VA (2015).
17. M.E. Natishan and W.C. Porr, Jr: in Structural Integrity of Fasteners, ASTM STP 1236, P.M Toor, ed., American Society for Testing and Materials International, West Conshohocken, 1995, pp. 81–92.10.1520/STP13048S ↗
18. M.E. Natishan and M. Wagenhofer: in Fatigue and Fracture Mechanics; Twenty-Ninth Volume, ASTM STP 1332, T.L. Panontin and S.D. Sheppard, eds., American Society for Testing and Materials International, West Conshohocken, 1999, pp. 384–92.10.1520/STP14959S ↗
19. G.K. Dey and P. Mukhopadhyay, Mater. Sci. Engr., vol. 84, 1986, pp. 177-89.10.1016/0025-5416(86)90236-3 ↗
20. T. Pardoen, D. Dumont, A. Deschamps, and Y. Brechet, J. Mech. Phys. Solids, vol. 51, 2003, pp. 637-65.10.1016/S0022-5096(02)00102-3 ↗
21. J. Frost and M.F. Ashby, Deformation-mechanism Maps: the Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, New York, NY (1982).
22. H. Cialone and R.J. Asaro, Metall. Trans. A, vol. 12A, 1981, pp. 1373-87.10.1007/BF02643682 ↗
23. J.P. Hirth: in Hydrogen Effects in Materials, A.W. Thompson and N.R. Moody, eds., TMS-AIME, Warrendale, 1996, pp. 507–22.
24. R. M. McMeeking, J. Mech. Phys. Solids, vol. 25, 1977, pp. 357-81.10.1016/0022-5096(77)90003-5 ↗
25. V.M. Kuznetsov, R.I. Kadyrov and G.E. Rudenskii, J. Mater. Sci. Technol., vol. 14, 1998, pp. 320-22.
26. E.A. Clarke, R. Yeske and H.K. Birnbaum, Metall. Trans. A, vol. 11A, 1980, pp. 1903-8.10.1007/BF02655107 ↗
27. Monel K-500 Data Sheet, http://www.specialmetals.com/documents/Monel%20alloy%20K-500.pdf.
28. J.A. Lillard: Ph.D. Dissertation, University of Virginia, Charlottesville, 1998.
29. R.A. Oriani: Ber. Bunsenges. Phys. Chem., 1972, vol. 76, pp. 848–57.10.1002/bbpc.19720760864 ↗
30. J.R. Rice, in Effect of Hydrogen on Behavior of Materials, A.W. Thompson and I.M. Bernstein, eds., Metallurgical Society of AIME, 1976, pp. 455–66.
31. E. Martinez-Paneda, C. Niordson, and R.P. Gangloff: in Strain Gradient Plasticity-based Modeling of Hydrogen Assisted Cracking, unpublished research, 2015.10.1016/j.actamat.2016.07.022 ↗
32. M.R. Begley, J.A. Begley, and C.M. Landis, in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, 2012, vol. 1, pp. 286–325.10.1533/9780857095374.2.286 ↗
33. U. Komaragiri, S.R. Agnew, R.P. Gangloff and M.R. Begley, J. Mech. Phys.Solids, vol. 56, 2008, pp. 3527-40.10.1016/j.jmps.2008.08.007 ↗
34. E. Martinez-Paneda and C. Betegon, Intl. J. Solids and Structures, vol. 59, 2015, pp. 208-15.10.1016/j.ijsolstr.2015.02.010 ↗
35. E. Martínez-Pañeda and C.F. Niordson: Int. J. Plast., 2015 (in press).
36. N.R. Moody, M.W. Perra and S.L. Robinson, Scripta Metall., vol. 22, 1988, pp. 1261-6.10.1016/S0036-9748(88)80143-1 ↗
37. N.R. Moody, S.L. Robinson and M.W. Perra, Engr. Frac. Mech., vol. 39, 1991, pp. 941-54.10.1016/0013-7944(91)90102-7 ↗
38. D.H. Lassila and H.K. Birnbaum, Acta metall., vol. 35, 1987, pp. 1815-22.10.1016/0001-6160(87)90127-1 ↗
39. D.H. Lassila and H.K. Birnbaum, Acta metall., vol. 36, 1988, pp. 2821-5.10.1016/0001-6160(88)90128-9 ↗
40. G. Schusteritsch and E. Kaxiras: Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 065007, 15.10.1088/0965-0393/20/6/065007 ↗
41. T.S.F. Lee and R.M. Latanision, Metall. Trans. A, 1987, vol. 18A, pp. 1653-62.10.1007/BF02646149 ↗
42. G.S. Painter and F.W Averill, Phys. Rev. Lett., 1987, vol. 58, pp. 234-37.10.1103/PhysRevLett.58.234 ↗
43. H.E. Huang and C.H. Koo: Mater. Trans. JIM, 2004, vol. 45, pp. 554–61.10.2320/matertrans.45.554 ↗