journal article·2006-04

Strain rate effect on the evolution of deformation texture for α-Fe

A. Bhattacharyya, G. Ravichandran, D. Rittel

Publisher page

Abstract

The effect of strain rate on the deformation texture of alpha-iron (α-Fe) is studied at different strain levels during the deformation. Two shear compression specimens (SCS) were deformed in three consecutive stages at room temperature, one at 10−3/s and the other at 10+3/s, to the same strain level. The crystallographic textures were determined using electron backscattered diffraction. The textures at each deformation stage were found to be unaffected by the wide variations in strain rate. By comparing the stress-strain curves and crystallographic texture at the two strain rate levels, it is realized that for α-Fe there is no marked increase in strain hardening at high strain rate with respect to quasi-static tests, so that the deformation texture remains unchanged. The temperature increase that develops at high strain rates is deemed to sharpen the texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. T.L. Richards: Prog. Metal Phys., 1949, vol. 1, pp. 281–305.10.1016/0502-8205(49)90008-8 ↗
2. J.C. Wright: J. Inst. Metals, 1965, vol. 93, pp. 289–97.
3. G.E.G. Tucker: Acta Metall., 1961, vol. 9, pp. 275–86.10.1016/0001-6160(61)90220-6 ↗
4. J. Hirsch, R. Musik, and K. Lucke: Proceedings of the Fifth International Conference on Texture of Materials, G. Gottstein and K. Lucke, eds., Springer-Verlag, Berlin, 1978, p. 437.
5. H. Sumitomo and H. Yoshimura: Proceedings of the Seventh International Conference on Texture of Materials, C.M. Brakman, P. Jogenberger, and E.J. Mittemeijer, eds., Netherlands Society for Material Science, Zwijindrecht, 1984.
6. H. Inagaki: Z. Metallkd., 1991, vol. 82, pp. 361–72.
7. R. Asaro and A. Needleman: Acta Metall., 1985, vol. 33, pp. 923–53.10.1016/0001-6160(85)90188-9 ↗
8. S. Kalidindi, C. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–69.10.1016/0022-5096(92)80003-9 ↗
9. K. Mathur and P. Dawson: Int. J. Plast., 1989, vol. 5, pp. 67–94.10.1016/0749-6419(89)90020-X ↗
10. M. Koizumi, S. Kohara, and H. Inagaki: Z. Metallkd., 2000, vol. 91, pp. 88–96.
11. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
12. I.L. Dillamore and W.T. Roberts: Acta Metall., 1964, vol. 12, pp. 281–93.10.1016/0001-6160(64)90204-4 ↗
13. H. Hu and R.S. Cline: J. Appl. Phys., 1961, vol. 32, pp. 760–63.10.1063/1.1736101 ↗
14. H. Hu and S.R. Goodman: Trans. Metall. Soc. AIME, 1963, vol. 227, pp. 627–39.
15. M.T. Perez-Prado, M.C. Cristina, M. Torralba, O.A. Ruano, and G. Gonzalez-Doncel: Scripta Mat., 1996, vol. 35, p. 1455.10.1016/S1359-6462(96)00324-7 ↗
16. C.I. Maurice and J.H. Driver: Mater. Sci. Forum, 1996, vol. 217, pp. 547–52.10.4028/www.scientific.net/MSF.217-222.547 ↗
17. N. Stanford, D. Dunne, and M. Ferry: Acta Mater., 2003, vol. 51, pp. 665–76.10.1016/S1359-6454(02)00445-7 ↗
18. B.J. Lee, K.S. Vecchio, S. Ahzi, and S.E. Schoenfeld: Metall. Mater. Trans., 1997, vol. 28A, pp. 113–22.10.1007/s11661-997-0087-5 ↗
19. J.W. House and P.P. Gillis: Mater. Sci. Forum, 2002, vol. 408, pp. 547–51.10.4028/www.scientific.net/MSF.408-412.547 ↗
20. B.K. Kad, S.E. Schoenfeld, and M.S. Burkins: Mater. Sci. Eng. A, 2002, vol. 322, pp. 241–51.10.1016/S0921-5093(01)01135-2 ↗
21. H. Hu, A. Zarkades, and F.R. Larson: Texture of Crystalline Solids, 1980, vol. 4, pp. 73–92.10.1155/TSM.4.73 ↗
22. S.R. Kalidindi, A. Bhattacharyya, and R.D. Doherty: Proc. R. Soc. London A, 2004, vol. 460, pp. 1935–56.10.1098/rspa.2003.1260 ↗
23. D.W. Brown, S.P. Abeln, W.R. Blumenthal, M.A.M. Bourke, M.C. Mataya, and C.N. Tome: Metall. Mater. Trans., 2005, vol. 36A, pp. 929–39.10.1007/s11661-005-0287-9 ↗
24. H. Suwas, L.S. Toth, J.J. Fundenberger, T. Grosdidier, and W. Strotzki: Solid State Phenomena, 2005, vol. 105, pp. 345–50.10.4028/www.scientific.net/SSP.105.345 ↗
25. D.A. Hughes, R.A. Lebensohn, H.R. Wenk, and A. Kumar: Proc. R. Soc. Lond. A, 2000, vol. 456, pp. 921–53.10.1098/rspa.2000.0543 ↗
26. D. Rittel, S. Lee, and G. Ravichandran: Exper. Mech., 2002, vol. 42, pp. 58–64.10.1007/BF02411052 ↗
27. D. Rittel, G. Ravichandran, and S. Lee: Mech. Mater., 2002, vol. 34, pp. 627–42.10.1016/S0167-6636(02)00164-3 ↗
28. M. Vural, D. Rittel, and G. Ravichandran: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2873–85.10.1007/s11661-003-0188-8 ↗
29. D. Rittel, R. Levin, and A. Dorogoy: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3787–95.10.1007/s11661-004-0284-4 ↗
30. A. Dorogoy and D. Rittel: Exper. Mech., 2005, vol. 45, pp. 167–77.10.1007/BF02428190 ↗
31. A. Dorogoy and D. Rittel: Exper. Mech, 2005, vol. 45, pp. 178–85.10.1007/BF02428191 ↗
32. G.T. Gray, III: ASM Handbook, 2000, vol. 8, p. 462.
33. F. Montheillet, M. Cohen, and J.J. Jonas: Acta Mater., 1984, vol. 32, pp. 2077–89.10.1016/0001-6160(84)90187-1 ↗
34. J. Baczynski and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 4273–88.10.1016/1359-6454(96)00114-0 ↗
35. S. Matsuoka, K. Sakata, S. Satoh, and Y. Kato: ISIJ Int., 1994, vol. 34, pp. 77–84.10.2355/isijinternational.34.77 ↗
36. W. Oesterle: Netherlands Soc. Mater. Sci., 1984, pp. 123–28.
37. A.S. Khan and R.Q. Liang: Int. J. Plast., 1999, vol. 15, pp. 1089–109.10.1016/S0749-6419(99)00030-3 ↗
38. A. Bhattacharyya, D. Rittel, and G. Ravichandran: Scripta Mater., 2005, vol. 52, pp. 657–61.10.1016/j.scriptamat.2004.11.019 ↗
39. ASM Handbook Mechanical Testing and Evaluation, 2000, vol. 8, p. 71.
40. J. Baczynski and J.J. Jonas: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 447–62.10.1007/s11661-998-0125-y ↗