Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment
Source abstract
Abstract
A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. R.N. Parkins: Corrosion/2000, NACE International, Houston, TX, paper no. 363, pp. 1–23.
2. J.M. Sutcliffe, R.R. Fessler, W.K. Boyd, and R.N. Parkins: Corrosion, 1972, vol. 28, p. 313.10.5006/0010-9312-28.8.313 ↗
3. E.I. Meletis: J. Mech. Behavior Mater., 1996, vol. 7, p. 1.10.1515/JMBM.1996.7.1.1 ↗
4. B.N. Leis and R.N. Parkins: Fatigue Fract. Eng. Mater. Struct., 1998, vol. 21, p. 583.10.1046/j.1460-2695.1998.00049.x ↗
5. B.S. Delanty and J. O’Beirne: Oil Gas J., 1992, June, p. 39.
6. R.N. Parkins, W.K. Blanchard Jr., and B.S. Delanty: Corrosion, 1994, vol. 50, p. 394.10.5006/1.3294348 ↗
7. R.N. Parkins: “Investigations Relating to Environment Sensitive Fracture in the TransCanada Pipeline System” Report to TCPL, Calgary, Canada, 1988.10.1520/STP26006S ↗
8. F. King, T. Jack, W. Chen, and S.-H. Wang: Corrosion 2001, 2001, paper No. 214, NACE International, Houston, TX, pp. 1–20.
9. S.-H. Wang, W. Chen, F. King, T.R. Jack, and R.R. Fessler: Corrosion, 2002, vol. 56 (6), p. 526.10.5006/1.3277644 ↗
10. Y.Z. Wang, R.W. Revie, and M.T. Shehata: in Materials for Resource Recovery and Transport, L. Collins, ed., TMS-CIM, 1998, p. 71.
11. Y-Z. Wang, R.W. Revie, and R.N. Parkins: Corrosion 99, 1999, paper no. 143, NACE International, Houston, TX, pp. 1–18.
12. T. Kushida, K. Nose, H. Asahi, M. Kimura, Y. Yamane, S. Endo, and H. Kawano: Corrosion 2001, paper no. 01213, NACE International, Houston, TX, pp. 1–15.
13. B.N. Leis and J.A. Colwell: in ASTM STP 1298, W.A. Van Der Sluys, R.S. Piascik and R. Zawierucha, eds., ASTM, Philadelphia, PA, 1997, p. 34.
14. R.L. Eadie, L.W. Hunt, R. Sutherby, G. Roy, G. Shen, J.L. Luo, W. Chen, T.C. Hamré, F. King, and T. Jack: “Long Seam Welds in Gas and Liquids Pipelines and Near-Neutral pH Stress Corrosion Cracking and Corrosion Fatigue,” paper presented at IPC 2002, Calgary, Canada, Sept. 29–Oct. 3, 2002.10.1115/IPC2002-27118 ↗
15. D. He, W. Chen, T.R. Jack, and F. King: 2000 Int. Pipeline Conf., Vol. 2, ed. J.R. Ellwood, ASME, New York, NY, 2000, p. 997.
16. T.R. Jack, M.J. Wilmott, and W. Chen: “SCC Susceptibility of X-70 Steel in Contact with Various Neutral pH Soil Solutions,” EPRG/PRCI 12th Biennial Joint Tech Mtg., The Netherlands, paper no. 10, 1999.
17. J.A. Beavers, C.L. Durr, and S.S. Shademan: in Materials for Resource Recovery and Transport, L. Collins, ed., The Metallurgical Society of CIMMontreal, Quebec, Canada, 1998, p. 31.
18. W. Chen, F. King, T.R. Jack, and M.J. Wilmott: Metall. Mater. Trans. A, 2002, vol. 33A, p. 1429.10.1007/s11661-002-0066-9 ↗
19. J.A. Beavers, J.T. Johnson, and R.L. Sutherby: Int. Pipeline Conf., 2000, vol. 2, p. 979.
20. X-Y. Zhang, S.B. Lambert, R. Sutherby, and A. Plumtree: Corrosion, 1999, vol. 55, p. 297.10.5006/1.3283991 ↗
21. T.M. Ahmed, S.B. Lambert, R. Sutherby, and A. Plumtree: Corrosion, 1997, vol. 53, p. 581.10.5006/1.3290290 ↗
22. S.B. Lambert, J.A. Beavers, D. Dalanty, R. Sutherby, and A. Plumtree: 2000 Int. Pipeline Conf., J.R. Ellwood, ed., ASME International, New York, NY, 2000, vol. 2, p. 961.
23. M.J. Wilmott and R.L. Sutherby: Int. Pipeline Conf., International, New York, NY, 1998, vol. 1, p. 409.
24. M.P.H. Brongers, J.A. Beavers, and C.E. Jaske: 2000 Int. Pipeline Conf., J.R. Ellwood, ed., ASME International, New York, NY, 2000, vol. 2, p. 743.
25. W. Zheng, F.A. MacLeod, R.W. Revie, W.R. Tyson, G. Shen, D. Kiff, M. Skaff, and E.-W. Wong: in Corrosion Deformation Interactions CD’96, T. Magnin, ed., EFC, The Institute of Materials, Terrace, London, Britain, 1996, p. 282.
26. M.J. Wilmott and R.L. Sutherby: Proc. Int. Pipeline Conf., ASME, New York, NY, 1998, pp. 409–42.
27. T.R. Jack, G. von Boven, M. Wilmott, R.L. Sutherby, and R.G. Worthingham: Mater. Performance, 1994, vol. 33, pp. 17–21.
28. F. King, R. Given, and W. Chen: Internal Report No. 01442, Nova Research & Technology Corp., ASME International, New York, NY, Nov. 2000.
29. G. Van Boven and W. Chen: Paper presented at the 8th Annual Materials Research Symp., Indianapolis, IN, Oct. 2001, ASM INTERNATIONAL, Metals Park, OH, 2001.