journal article·2013-10

Microstructure and Mechanical Properties of Mg-7Al-2Sn Alloy Processed by Super Vacuum Die-Casting

Xiaoying Shi, Dejiang Li, Alan A. Luo, Bin Hu, Li Li, Xiaoqin Zeng, Wenjiang Ding

Publisher page

Abstract

The microstructural evolution of Mg-7Al-2Sn (AT72) alloy processed by super vacuum die-casting and heat treated at various conditions was studied. The results showed that the dendritic microstructure in the as-cast AT72 alloy consisted of α-Mg, Mg2Sn, and Mg17Al12 phases. After solution treatment at temperatures ranging from 663 K to 703 K (390 °C to 430 °C), the Mg17Al12 phase dissolved into the Mg matrix entirely, while the Mg2Sn phase partially dissolved into matrix. An average grain size of about 40 μm in the alloy could be achieved after solution treatment at 683 K (410 °C) for 16 hours. A large amount of lath-shaped precipitates of Mg2Sn and Mg17Al12 was observed in the aged AT72 alloy. The results of tensile property evaluation at room temperature showed that the ductility of the solution-treated alloy was dramatically improved, in comparison with the as-cast alloy. In the peak aged condition, the tensile strength of the alloy was increased, which was attributed to the deposition of fine Mg17Al12 and Mg2Sn precipitates during the aging treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Y. Terada, D. Itoh, T. Sato: Mater. Sci. Eng., 2009, vol. 523A, pp. 214-219.10.1016/j.msea.2009.07.001 ↗
2. Z. Brown, A.A. Luo, M. Musser, L.J. Ouimet, K. Sadayappan, J. Zindel, and R. Beals: North American Die Casting Association Transactions, Wheeling, 2009, pp. T09–043.
3. K. Sadayappan, W. Kasprzak, Z. Brown, L. Ouimet, A.A. Luo: Mater. Sci. Forum, 2009, vol. 618-619, pp. 381-386.10.4028/www.scientific.net/MSF.618-619.381 ↗
4. M. Krau, B. Scholtes: Materialwiss. Werkstofftech., 2008, vol. 39, pp. 562-570.10.1002/mawe.200800311 ↗
5. H.A. Patel, N. Rashidi, D.L. Chen, S.D. Bhole, A.A. Luo: Mater. Sci. Eng., 2012, vol. 546A, pp. 72-81.10.1016/j.msea.2012.03.028 ↗
6. W. Wen, A.A. Luo, T. Zhai, Y. Jin, Y.T. Cheng, I. Hoffmann: Scripta Mater., 2012, vol. 67, pp. 879-882.10.1016/j.scriptamat.2012.08.010 ↗
7. D.H. Kang, S.S. Park, Y.S. Oh, and N.J. Kim: Mater. Sci. Eng., 2007, vol. 449–451A, pp. 318–21.10.1016/j.msea.2006.02.332 ↗
8. A.A. Luo, P.H. Fu, L.M. Peng, X.Y. Kang, Z.Z. Li, T.Y. Zhu: Metall. Mater. Trans., 2012, vol. 43A, pp. 360-368.10.1007/s11661-011-0820-y ↗
9. J. Song, S.M. Xiong: J. Alloys Compd., 2011, vol. 509, pp. 1866-1869.10.1016/j.jallcom.2010.10.075 ↗
10. Z.F. Li, J. Dong, X.Q. Zeng, C. Lu, W.J. Ding, Z.M. Ren: J. Alloys Compd., 2008, vol. 455, pp. 231-235.10.1016/j.jallcom.2007.01.155 ↗
11. A.A. Nayeb-Hashemi, J.B. Clark, Phase Diagram of Binary Magnesium Alloys, ASM International, Materials Park, OH, 1988.
12. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, K. Hono: Scripta Mater., 2006, vol. 55, pp. 251-254.10.1016/j.scriptamat.2006.04.005 ↗
13. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, K. Hono: Mater. Sci. Eng., 2011, vol. 530A, pp. 1-8.10.1016/j.msea.2010.05.010 ↗
14. A.L. Bowles, H. Dieringa, C. Blawert, N. Hort, K.U. Kainer: Mater. Sci. Forum, 2005, vol. 488-489, pp. 135-138.10.4028/www.scientific.net/MSF.488-489.135 ↗
15. J. Van der Planken: J. Mater. Sci. Lett., 1969, vol. 4, pp. 927-929.10.1007/BF00549785 ↗
16. M. A. Gibson, X. Fang, C.J. Bettles, C.R. Hutchinson: Scripta Mater., 2010, vol. 63, pp. 899-902.10.1016/j.scriptamat.2010.07.002 ↗
17. G. Derge, A.R. Kommell, R.F. Mehl: Trans. AIME, 1937, vol. 124, pp. 367.
18. C.L. Mendis, C.J. Bettles, M.A. Gibson, and C.R. Hutchinson: Mater. Sci. Eng., 2006, vol. 435–436A, pp. 163–71.10.1016/j.msea.2006.07.090 ↗
19. C.L. Mendis, C.J. Bettles, M.A. Gibson, S. Gorsse, C.R. Hutchinson: Philos. Mag. Lett., 2006, vol. 26, 443-456.10.1080/09500830600871186 ↗
20. F.R. Elsayed, T.T. Sasaki, C.L. Mendis, T. Ohkubo, K. Hono: Mater. Sci. Eng., 2013, vol. 566A, pp. 22-29.10.1016/j.msea.2012.12.041 ↗
21. A.A. Luo, and A.K. Sachdev: Magnesium Technology 2009, TMS, Warrendale, PA, 2009, pp. 437–43.
22. S. Avraham, A. Katsman, and M. Bamberger: Magnesium Technology 2009, TMS, Warrendale, PA, 2009, pp. 471–75.
23. Y. Mishin, C. Herzig: Mater. Sci. Eng., 1999, vol. 260A, pp. 55.10.1016/S0921-5093(98)00978-2 ↗
24. IJ. Polmear: Light Alloys, 3rd ed., Edward Arnold, London, 1995.
25. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009-1015.10.1016/S1359-6462(02)00497-9 ↗
26. J.B. Clark: Acta Metall., 1968, vol. 16, pp. 141-152.10.1016/0001-6160(68)90109-0 ↗
27. S. Celotto: Acta Mater., 2000, vol. 48, pp. 1775-1787.10.1016/S1359-6454(00)00004-5 ↗
28. J.F. Nie, X. Gao, S.M. Zhu: Scripta Mater., 2005, vol. 53, pp. 1049-1053.10.1016/j.scriptamat.2005.07.004 ↗
29. B. Smola, I. Stulikova, F. von Bush, and B.L. Mordike: Mater. Sci. Eng., 2002, vol. 324A, pp. 113–17.10.1016/S0921-5093(01)01291-6 ↗
30. D.H. Ping, K. Hono, J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1017-1022.10.1016/S1359-6462(02)00586-9 ↗
31. C.L. Mendis, K. Oh-ishi, K. Hono: Scripta Mater., 2007, vol. 57, pp. 485-488.10.1016/j.scriptamat.2007.05.031 ↗
32. J.H. Chen, Z.H. Chen, H.G. Yan, F.Q. Zhang, K. Liao: J. Alloys Compd., 2008, vol. 461, pp. 209-215.10.1016/j.jallcom.2007.07.066 ↗
33. W.L. Xiao, S.S. Jia, L.D. Wang, Y.M. Wu, L.M. Wang: Mater. Sci. Eng., 2010, vol. 527A, pp. 7002-7007.10.1016/j.msea.2010.07.019 ↗