journal article·2009-12

Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization

Swati Ghosh, V. Kain, A. Ray, H. Roy, S. Sivaprasad, S. Tarafder, K. K. Ray

Publisher page

Abstract

The aim of this report is to examine the influence of sensitization on the mechanical properties of AISI grade 304LN stainless steel with special emphasis on its fracture toughness. A series of stainless steel samples has been sensitized by holding at 1023 K for different time periods ranging from 1 to 100 hours followed by water quenching. The degree of sensitization (DOS) for each type of the varyingly heat-treated samples has been measured by an electrochemical potentiodynamic reactivation (EPR) test. The microstructures of these samples have been characterized by optical metallography, scanning electron microscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD) analyses, together with measurements of their hardness and tensile properties. The fracture toughness of the samples has been measured by the ball indentation (BI) technique and the results are validated by conducting conventional J-integral tests. It is revealed for the first time that the fracture toughness and ductility of AISI 304LN stainless steel deteriorate significantly with increased DOS, while the tensile strength (TS) values remain almost unaltered. The results have been critically discussed in terms of the depletion of solid solution strengtheners, the nature of the grain boundary precipitations, and the strain-induced martensite formation with the increasing DOS of the 304LN stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. R. Singh, S.G. Chowdhury, B.R. Kumar, S.K. Das, P.K. De, and I. Chattoraj: Scripta Mater., 2007, vol. 57, pp. 185–88.10.1016/j.scriptamat.2007.04.017 ↗
2. Y. Kamada, T. Mikami, S. Takahashi, H. Kikuchi, S. Kobayashi, and K. Ara: J. Magn. Magn. Mater., 2007, vol. 310, pp. 2856–58.10.1016/j.jmmm.2006.11.074 ↗
3. G.H. Aydogdu and M.K. Aydinol: Corros. Sci., 2006, vol. 48, pp. 3565–83.10.1016/j.corsci.2006.01.003 ↗
4. N. Parvathavarthini, R.K. Dayal, H.S. Khatak, V. Shankar, and V. Shanmugam: J. Nucl. Mater., 2006, vol. 355, pp. 68–82.10.1016/j.jnucmat.2006.04.006 ↗
5. D.N. Wasnik, V. Kain, I. Samajdar, B. Verlinden, and P.K. De: Acta Mater., 2002, vol. 50, pp. 4587–4601.10.1016/S1359-6454(02)00306-3 ↗
6. V. Kain, K. Chandra, K.N. Adhe, and P.K. De: J. Nucl. Mater., 2004, vol. 334, pp. 115–32.10.1016/j.jnucmat.2004.05.008 ↗
7. Y. Ustinovshikov, A. Ruts, O. Bannykh, V. Blinov, and M. Kostina: Mater. Sci. Eng., A, 1999, vol. 262, pp. 82–87.10.1016/S0921-5093(98)01015-6 ↗
8. P. Shankar, H. Shaikh, S. Sivakumar, S. Venugopal, D. Sundararaman, and H.S. Khatak: J. Nucl. Mater., 1999, vol. 264, pp. 29–34.10.1016/S0022-3115(98)00488-7 ↗
9. P. Shankar, S. Sundararaman, and S. Ranganathan: J. Nucl. Mater., 1998, vol. 254, pp. 1–8.10.1016/S0022-3115(97)00357-7 ↗
10. P. Shankar, S. Sundararaman, and S. Ranganathan: Scripta Metall. Mater., 1994, vol. 31 (5), pp. 589–93.10.1016/0956-716X(94)90149-X ↗
11. S.S.M. Tavares and M.P. Cindra Fonseca: J. Mater. Sci., 2003, vol. 38, pp. 3527–33.10.1023/A:1025652609061 ↗
12. “ASTM A262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2002, vol. 01.03, pp. 1–16.
13. “ASTM G108-94 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels,” Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1999, vol. 03.02, pp. 1–9.
14. “JSA JIS G 0580 Method of Electrochemical Potentiokinetic Reactivation Ratio Measurement for Stainless Steels,” Japanese Standards Association, Tokyo, 1986, pp. 1–4.
15. R. Beneke and R.F. Sandenbergh: Corros. Sci., 1989, vol. 29, pp. 543–55.10.1016/0010-938X(89)90006-1 ↗
16. R.S. Dutta, P.K. De, and H.S. Gadiyar: Corros. Sci., 1993, vol. 34, pp. 51–60.10.1016/0010-938X(93)90258-I ↗
17. T.M. Devine: Corros. Sci., 1990, vol. 30, pp. 135–51.10.1016/0010-938X(90)90068-G ↗
18. E.P. Butler and M.G. Burke: Acta Metall., 1986, vol. 34, pp. 557–70.10.1016/0001-6160(86)90091-X ↗
19. S. Takaya, T. Suzuki, Y. Matsumoto, K. Demachi, and M. Uesaka: J. Nucl. Mater., 2004, vol. 327, pp. 19–26.10.1016/j.jnucmat.2004.01.016 ↗
20. G. Han, J. He, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46, pp. 4559–70.10.1016/S1359-6454(98)00136-0 ↗
21. C.L. Briant and A.M. Ritter: Metall. Trans. A, 1981, vol. 12A, pp. 910–13.10.1007/BF02648358 ↗
22. C.L. Briant: Scripta Metall., 1978, vol. 12, pp. 541–42.10.1016/0036-9748(78)90204-1 ↗
23. O.A. Hilders and M.G. Santana: Metallography, 1988, vol. 21, pp. 151–64.10.1016/0026-0800(88)90013-4 ↗
24. S.S.M. Tavares and M.P.C. Fonseca: J. Mater. Sci., 2003, vol. 38, pp. 3527–33.10.1023/A:1025652609061 ↗
25. “ASTM E1820-03 Standard Test Method for Measurement of Fracture Toughness,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2003, vol. 01.03, pp. 1–34.
26. “ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials,” Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2000, vol. 03.03, pp. 1–22.
27. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scripta Mater., 2004, vol. 50, pp. 1445–49.10.1016/j.scriptamat.2004.03.011 ↗
28. M.S. Laws and P.J. Goodhew: Acta Metall. Mater., 1991, vol. 39, pp. 1525–33.10.1016/0956-7151(91)90238-V ↗
29. H.U. Hong and S.W. Nam: Mater. Sci. Eng., A, 2002, vol. 332, pp. 255–61.10.1016/S0921-5093(01)01754-3 ↗
30. S.M. Bruemmer and L.A. Charlot: Scripta Metall., 1986, vol. 20, pp. 1019–24.10.1016/0036-9748(86)90428-X ↗
31. P.I. Williams and R.G. Faulkner: J. Mater. Sci., 1987, vol. 22, pp. 3537–42.10.1007/BF01161455 ↗
32. L. Cihal, T. Shouji, V. Kain, Y. Watanabe, and R. Stefac: EPR—A Comprehensive Review, Fracture Reliability and Research Institute, Sendai, Japan, 2004, pp. 9–20.
33. K.J. Kozaczek, A. Sinharoy, C.O. Ruud, and A.R. McIlree: Modell. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 829–43.10.1088/0965-0393/3/6/006 ↗
34. T. Sourmail and H.K.D.H. Bhadeshia: CALPHAD, 2003, vol. 27, pp. 169–75.10.1016/j.calphad.2003.08.002 ↗
35. W.M. Garrison, Jr. and N.R. Moody: J. Phys. Chem. Solids, 1987, vol. 48, pp. 1035–74.10.1016/0022-3697(87)90118-1 ↗
36. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Book Co., New York, NY, 1986, pp. 262–65.
37. A. Das, S.K. Das, S. Sivaprasad, and S. Tarafder: Scripta Mater., 2008, vol. 59, pp. 681–83.10.1016/j.scriptamat.2008.05.043 ↗
38. F.M. Haggag, R.K. Nanstad, J.T. Hutton, D.L. Thomas, and R.L. Swain: ASTM 1092, ASTM, Philadelphia, PA, 1990, pp. 188–208.
39. T.S. Byun, J.W Kim, and J.H. Hong: J. Nucl. Mater., 1998, vol. 252, pp. 187–94.10.1016/S0022-3115(97)00338-3 ↗
40. K.L. Murty and M.D. Mathew: Nucl. Eng. Des., 2004, vol. 228, pp. 81–96.10.1016/j.nucengdes.2003.06.006 ↗
41. A. Bhattacharyya: Master’s Thesis, Indian Institute of Technology, Kharagpur, India, 2006.
42. D.A. Curry and J.F. Knott: Met. Sci., 1979, vol. 13, pp. 341–45.10.1179/msc.1979.13.6.341 ↗