Influence of Constituent Materials on the Impact Toughness and Fracture Mechanisms of Hot-Roll-Bonded Aluminum Multilayer Laminates
Source abstract
Abstract
Two aluminum multilayer laminates have been processed by hot roll bonding following similar processing paths. The first one is constituted by alternated Al 2024 and Al 1050 layers (ALH19) and the second one by alternated Al 7075 and Al 1050 layers (ADH19). The influence of the constituent materials in the multilayer laminates both during the processing at high temperature and during the subsequent mechanical characterization has been analyzed. The mechanical behavior of the as-received materials at the processing conditions has been characterized by hot torsion. Multilayer laminates have been tested at room temperature under impact Charpy tests, three-point bend tests, and shear tests on the interfaces. The relative toughness increase compared to the constituent materials was much higher for the ADH19 laminate based on the high-strength Al 7075 alloy than for the ALH19 laminate. This is attributed to the different fracture mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. B.A. Movchan and F.D. Lemkey: Mater. Sci. Eng., A, 1997, vol. 224, pp. 136–45.10.1016/S0921-5093(96)10455-X ↗
2. D. Wang and Z.Y. Ma: J. Alloys Compd., 2009, vol. 469, pp. 445–50.10.1016/j.jallcom.2008.01.137 ↗
3. S. Bueno and C. Baudín: Key Eng. Mater., 2007, vol. 333, pp. 17–26.10.4028/www.scientific.net/KEM.333.17 ↗
4. H. Danesh Manesh and H. Sh. Shahabi: J. Alloys Compd., 2009, vol. 476, pp. 292–99.10.1016/j.jallcom.2008.08.081 ↗
5. C.M. Cepeda-Jiménez, M. Pozuelo, O.A. Ruano, and F. Carreño: Mater. Sci. Eng., A, 2008, vol. 490, pp. 319–27.10.1016/j.msea.2008.01.034 ↗
6. M. Pozuelo, F. Carreño, and O.A. Ruano: Compos. Sci. Technol., 2006, vol. 66, pp. 2671–76.10.1016/j.compscitech.2006.03.018 ↗
7. G. Heness, R. Wuhrer, and W.Y. Yeung: Mater. Sci. Eng., A, 2008, vols. 483–484, pp. 740–42.10.1016/j.msea.2006.09.184 ↗
8. M.Z. Quadir, A. Wolz, M. Hoffman, and M. Ferry: Scripta Mater., 2008, vol. 58, pp. 959–62.10.1016/j.scriptamat.2008.01.022 ↗
9. C.M. Cepeda-Jiménez, M. Pozuelo, J.M. García-Infanta, O.A. Ruano, and F. Carreño: Mater. Sci. Eng., A, 2008, vol. 496, pp. 133–42.10.1016/j.msea.2008.05.015 ↗
10. M. Carsí, F. Peñalba, O.A. Ruano, and O.D. Sherby: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1913–20.10.1007/s11661-997-0121-7 ↗
11. D.S. Fields, Jr. and W.A. Backofen: Proc. ASTM, 1957, vol. 57, pp. 1259–72.
12. C.M. Cepeda-Jiménez, R.C. Alderliesten, O.A. Ruano, and F. Carreño. Compos. Sci. Technol., 2009, vol. 69, pp. 343–48.10.1016/j.compscitech.2008.10.010 ↗
13. G.E. Dieter: Mechanical Metallurgy, SI Metric, London, United Kingdom, 1988, pp. 12–15.
14. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomenon, 2nd ed., Elsevier, Oxford, United Kingdom, 2004, pp. 68–74.
15. A. Fernández-Vicente, M. Carsí, F. Peñalba, F. Carreño, and O.A. Ruano: Z. Metallkd., 2003, vol. 94, pp. 922–29.10.3139/146.030922 ↗
16. B. Verlinden, P. Wouters, H.J. McQueen, E. Aernoudt, L. Delaey, and S. Cauwenberg: Mater. Sci. Eng., A, 1990, vol. 123, pp. 229–37.10.1016/0921-5093(90)90288-E ↗
17. E. Cerri, E. Evangelista, A. Forcellese, and H.J. McQueen: Mater. Sci. Eng., A, 1995, vol. 197, pp. 181–98.10.1016/0921-5093(94)09714-3 ↗
18. C.M. Cepeda-Jiménez, M. Pozuelo, J.M. García-Infanta, O.A. Ruano, and F. Carreño: Metall. Mater. Trans. A, 2009, vol. 40, pp. 69–79.10.1007/s11661-008-9679-y ↗
19. M. Bannister and M.F. Ashby: Acta Metall. Mater., 1991, vol. 39, pp. 2575–82.10.1016/0956-7151(91)90072-9 ↗
20. P.J. Hurley and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 1087–1102.10.1016/S1359-6454(02)00513-X ↗
21. C.Y. Yu, P.L. Sun, P.W. Kao, and C.P. Chang: Mater. Sci. Eng., A, 2004, vol. 366, pp. 310–17.10.1016/j.msea.2003.08.039 ↗
22. C. Badini, F. Marino, and E Verné: Mater. Sci. Eng., A, 1995, vol. 191, pp. 185–91.10.1016/0921-5093(94)09637-C ↗
23. F. Viana, A.M.P. Pinto, H.M.C. Santos, and A.B. Lopes: J. Mater. Process. Technol., 1999, vols. 92–93, pp. 54–59.10.1016/S0924-0136(99)00219-8 ↗
24. W.D. Callister: Materials Science and Engineering: An Introduction, 3rd ed., John Wiley & Sons, Inc.., New York, NY, 1994.
25. B. Huang and Z. Zheng: Scripta Mater., 1998, vol. 38, pp. 611–16.10.1016/S1359-6462(97)00513-7 ↗
26. R. Galler and H. Mehrer: Mater. Sci. Eng., A, 2000, vols. 294–296, pp. 693–96.10.1016/S0921-5093(00)01145-X ↗
27. Y. Huang, N. Ridley, F.J. Humphreys, and J.-Z. Cui: Mater. Sci. Eng., A, 1999, vol. 266, pp. 295–302.10.1016/S0921-5093(98)00958-7 ↗
28. J.W. Hutchinson: A Short Course on: The Integrity of Thin Films and Multilayers, National University of Singapore, Singapore, 1997, pp. 21–34.
29. F. Carreño, M. Pozuelo, J.A. Jiménez, and O.A. Ruano: Mater. Sci. Forum, 2007, vols. 539–543, pp. 901–06.10.4028/www.scientific.net/MSF.539-543.901 ↗