journal article·2012-10

Corrosion Behavior of Sn-3.0Ag-0.5Cu Lead-Free Solder in Potassium Hydroxide Electrolyte

Mui Chee Liew, Ibrahym Ahmad, Liu Mei Lee, Muhammad Firdaus Mohd Nazeri, Habsah Haliman, Ahmad Azmin Mohamad

Publisher page

Abstract

The corrosion behavior of Sn-3.0Ag-0.5Cu (SAC305) solder alloy in 6 M potassium hydroxide electrolyte was investigated using polarization analysis. The results revealed that SAC305 is susceptible to corrosion because of the dissolution of the Sn phase. The corrosion potential (E corr) and corrosion current density (i corr) obtained from the sample was –1.108 V vs Hg/HgO and 1.795 × 10−4 A cm−2, respectively. In addition, microstructural and elemental characterization revealed the presence of tin oxide, Cu, and/or Ag-containing corrosion product on the surface of the corroded sample. The morphology of the samples was also observed to contain several pits, cracks, and pore-like structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. D. Li, P.P. Conway, and C. Liu: Corros. Sci., 2008, vol. 50, pp. 995–1004.10.1016/j.corsci.2007.11.025 ↗
2. F. Rosalbino, E. Angelini, G. Zanicchi, R. Carlini, and R. Marazza: Electrochim. Acta, 2009, vol. 54, pp. 7231–35.10.1016/j.electacta.2009.07.030 ↗
3. F. Rosalbino, E. Angelini, G. Zanicchi, R. Carlini, and R. Marazza: Mater. Chem. Phys., 2008, vol. 109, pp. 386–91.10.1016/j.matchemphys.2007.12.006 ↗
4. C.Q. Cheng, F. Yang, J. Zhao, L.H. Wang, and X.G. Li: Corros. Sci., 2011, vol. 53, pp. 1738–47.10.1016/j.corsci.2011.01.049 ↗
5. B.Y. Wu, Y.C. Chan, and M.O. Alam: J. Mater. Res., 2006, vol. 21, pp. 62.10.1557/jmr.2006.0035 ↗
6. H. Mohran, A.-R. El-Sayed, and H. Abd El-Lateef: J. Solid State Electrochem., 2009, vol. 13, pp. 1279–90.10.1007/s10008-008-0676-2 ↗
7. H. Chang, H. Chen, M. Li, L. Wang, and Y. Fu: J. Electron. Mater., 2009, vol. 38, pp. 2170–78.10.1007/s11664-009-0868-2 ↗
8. P.E. Alvarez, S.B. Ribotta, M.E. Folquer, C.A. Gervasi, and J.R. Vilche: Corros. Sci., 2002, vol. 44, pp. 49–65.10.1016/S0010-938X(01)00032-4 ↗
9. S.S.A. El Rahim, A. El Sayed, and A.A. El Samahi: Surf. Coat. Technol., 1986, vol. 27, pp. 205–17.10.1016/0257-8972(86)90102-7 ↗
10. F.A. Cotton and G. Wilkinson: Advanced Inorganic Chemistry, Wiley, London, U.K., 1972, pp. 330.
11. C.A. Gervasi, P.A. Palacios, M.V. Fiori Bimbi, and P.E. Alvarez: J. Electroanal. Chem., 2010, vol. 639, pp. 141–46.10.1016/j.jelechem.2009.12.002 ↗
12. J.S. Hwang: Environmentally-Friendly Electronics: Lead Free Technology, Electrochemical Publications, Ltd., Isle of Man, 2001.
13. K.S. Kim, S.H. Huh, and K. Suganuma: Mater. Sci. Eng. A, 2002, vol. 333, pp. 106–14.10.1016/S0921-5093(01)01828-7 ↗
14. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R, 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
15. M. Reid, J. Punch, M. Collins and C. Ryan: Soldering & Surface Mount Technology, Emerald Group Publishing Limited, Bingley, U.K., 2008, pp. 3–8.
16. J.W. Yoon and S.B. Jung: J. Alloys Compd., 2008, vol. 448, pp. 177–184.10.1016/j.jallcom.2006.10.052 ↗
17. R.S. Sidhu, S.V. Madge, X. Deng, and N.J. Chawla: J. Electron. Mater., 2007, vol. 36, pp. 1615.10.1007/s11664-007-0239-9 ↗