Effect of overaging and particle size on tensile deformation and fracture of particle-reinforced aluminum matrix composites
Source abstract
Abstract
The effect of reinforcement particle size and overaging treatment on the tensile behavior and fracture morphology of a 2080/SiC/20p composite was investigated. Tensile behavior was profoundly influenced by particle size and matrix strength. The composite strength increased with a decrease in particle size, while overaging greatly reduced the strength of the composite, independent of particle size. Almost all particles on the fracture plane were fractured, and the amount of particle fracture in the composites was insensitive to overaging and particle size, due to the excellent bonding between SiC particles and the Al matrix. Fractography showed that void nucleation in the matrix of peak-aged composites took place primarily at very fine SiC particles, which were much smaller than the average SiC particle size. Subsequent failure took place by the tearing topography surface (TTS) mechanism. In the overaged composite, composites failed by a more conventional void nucleation and growth process, where void nucleation took place at coarsened S precipitate particles, resulting in smaller and more elongated voids.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. N. Chawla and Y.-L. Shen: Adv. Mater. Eng., 2001, vol. 3, pp. 357–70.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. N. Chawla, C. Andres, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2843–54.10.1007/s11661-998-0325-5 ↗
3. L.C. Davis, C. Andres, and J.E. Allison: Mater. Sci. Eng., 1998, vol. A249, pp. 40–45.10.1016/S0921-5093(98)00561-9 ↗
4. J. Llorca, S. Suresh, and A. Needleman: Metall. Trans. A, 1992, vol. 23A, pp. 919–34.10.1007/BF02675568 ↗
5. P.M. Mummery, B. Derby, D.J. Buttle, and C.B. Scruby: Proc. Euromat 91, T.W. Clyne and P.J. Withers, eds., European Materials Society, Cambridge, United Kingdom, vol. 2, pp. 441–47.
6. T.S. Srivatsan: J. Mater. Sci., 1996, vol. 31, pp. 1375–88.10.1007/BF00353120 ↗
7. T.S. Srivatsan and J. Mattingly: J. Mater. Sci., 1993, vol. 28, pp. 611–20.10.1007/BF01151235 ↗
8. H.L. Cox: Br. J. Appl. Phys., 1952, vol. 3, p. 122.10.1088/0508-3443/3/3/302 ↗
9. A. Kelly: Strong Solids, Clarendon Press, Oxford, United Kingdom, 1973, p. 157.
10. V.C. Nardone and K.M. Prewo: Scripta Metall., 1989, United Kingdom, vol. 23, p. 291.10.1016/0036-9748(89)90428-6 ↗
11. K.K. Chawla and M. Metzger: J. Mater. Sci., 1972, vol. 7, p. 34.10.1007/BF00549547 ↗
12. M. Vogelsang, R.J. Arsenault, and R.M. Fisher: Metall. Trans A, 1986, vol. 17A, pp. 379–89.10.1007/BF02643944 ↗
13. R.J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, p. 175.10.1016/0025-5416(86)90261-2 ↗
14. P.M. Singh and J.J. Lewandowski: Metall. Trans. A, 1993, vol. 24A, pp. 2531–43.10.1007/BF02646532 ↗
15. P.M. Singh and J.J. Lewandowski: in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems, J.J. Lewandowski and W.H. Hunt, Jr., eds., TMS Warrendale, PA, 1995, pp. 57–68.
16. M. Manoharan and J.J. Lewandowski: Acta Metall. Mater., 1990, vol. 38, pp. 489–96.10.1016/0956-7151(90)90155-A ↗
17. M. Manoharan, J.J. Lewandowski, and W.H. Hunt: Mater. Sci. Eng., 1993, vol. A172, pp. 63–6910.1016/0921-5093(93)90426-F ↗
18. A.F. Whitehouse and T.W. Clyne: Acta Metall. Mater., 1993, vol. 41, pp. 1701–11.10.1016/0956-7151(93)90189-Y ↗
19. A.F. Whitehouse, R.A. Shahani, and T.W. Clyne: in Metal Matrix Composites—Processing, Microstructure and Properties, N. Hansen et al., eds., Ris National Laboratory, Roskilde, Denmark, pp. 741–46.
20. P.E. Krajewski, J.E. Allison, and J.W. Jones: Metall. Trans. A, 1993, vol. 24, p. 2731.10.1007/BF02659497 ↗
21. N. Chawla, U. Habel, Y.-L. Shen, C. Andres, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 2000,. vol. 31A, pp. 531–40.10.1007/s11661-000-0288-7 ↗
22. G.C. Weatherly and R.B. Nicholson: Phil. Mag., 1968, vol. 17, p. 801.10.1080/14786436808223031 ↗
23. J.N. Goodier: J. Appl. Mech., 1933, vol. 55 (7), p. 39.10.1115/1.4012173 ↗
24. S.F. Corbin and D.S. Wilkinson: Acta Metall. Mater., 1994, vol. 42, p. 1319.10.1016/0956-7151(94)90148-1 ↗
25. N. Chawla, C. Andres, J.W. Jones, and J.E. Allison: Scripta Mater., 1998, vol. 38, p. 1596.10.1016/S1359-6462(98)00067-0 ↗
26. E. Marie, C. Verdu, G. Lormand, and R. Fougeres: Mater. Sci. Eng., 1995, vol. 196, p. 135–44.10.1016/0921-5093(94)09713-5 ↗
27. M. Finot, Y.-L. Shen, A. Needleman, and S. Suresh: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2403–20.10.1007/BF02648860 ↗
28. S. Kamat, J.P. Hirth, and R. Mehrabian: Acta Metall., 1989, vol. 37, p. 2395.10.1016/0001-6160(89)90037-0 ↗
29. M.J. Hadianfard, J. Healy, and Y.W. Mai: J. Mater. Sci., 1994, vol. 29, pp. 2321–27.10.1007/BF00363421 ↗
30. A.M. Murphy, S.J. Howard, and T.W. Clyne: Mater. Sci. Technol., 1998, vol. 14, pp. 959–68.10.1179/026708398790613353 ↗
31. J. Boselli, P.D. Pitcher, P.J. Gregson, and I. Sinclair: Mater. Sci. Eng., 2001, vol. A300, pp. 113–24.10.1016/S0921-5093(00)01671-3 ↗
32. A.W. Thompson and J.C. Chesnutt: Metall. Trans. A, 1979, vol. 10A, pp. 1193–9610.1007/BF02811666 ↗
33. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825–37.10.1007/BF02672306 ↗