journal article·2006-03

Simulation of the mechanical properties of an aluminum matrix composite using X-ray microtomography

I. G. Watson, P. D. Lee, R. J. Dashwood, P. Young

Publisher page

Abstract

Aluminum-based particulate-reinforced metal matrix composites (PMMCs) frequently have a heterogeneous distribution of reinforcement particles whether produced by a powder or liquid processing route. The applicability of X-ray microtomography (XMT) for the characterization of this heterogeneity, and its influence on final properties, was investigated for the case of a powder blended and extruded AA2124 matrix with Ni particulate. Three-dimensional image analysis techniques were used to quantify the embedded Ni particle size distribution and the extent and texture of clusters formed. The XMT data were exploited as a rapid method to generate a microstructurally accurate and robust three-dimensional mesh for input for finite-element modeling. Simulation of the elastoplastic response of the material showed excellent correlation with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. J. Boselli, P.D. Pitcher, P.J. Gregson, and I. Sinclair: J. Microsc., 1999, vol. 195 (2), pp. 104–12.10.1046/j.1365-2818.1999.00483.x ↗
2. J. Boselli, P.D. Pitcher, P.J. Gregson, and I. Sinclair: Mater. Sci. Eng., A, 2001, vol. 300 (1–2), pp. 113–24.10.1016/S0921-5093(00)01671-3 ↗
3. R.C. Atwood, J.R. Jones, P.D. Lee, and L.L. Hench: Scripta Mater., 2004, vol. 51 (11), pp. 1029–33.10.1016/j.scriptamat.2004.08.014 ↗
4. S. Youssef, E. Maire, and R. Gaertner: Acta Mater., 2005, vol. 53 (3), pp. 719–30.10.1016/j.actamat.2004.10.024 ↗
5. N.C.W. Kuijpers, J. Tirel, D.N. Hanlon, and S. van der Zwaag: Mater. Characterization, 2002, vol. 48 (5), pp. 379–92.10.1016/S1044-5803(02)00289-9 ↗
6. J.Z. Yi, Y.X. Gao, P.D. Lee, and T.C. Lindley: Mater. Sci. Eng., A, 2004, vol. 386, pp. 394–407.
7. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Trans. A, 2003, vol. 34A, pp. 1879–91.10.1007/s11661-003-0153-6 ↗
8. M. Li, S. Ghosh, O. Richmond, H. Weiland, and T.N. Rouns: Mater. Sci. Eng., A, 1999, vol. 266 (1–2), pp. 221–40.10.1016/S0921-5093(98)01133-2 ↗
9. M. Li, S. Ghosh, O. Richmond, H. Weiland, and T.N. Rouns: Mater. Sci. Eng., A, 1999, vol. 265 (1–2), pp. 153–73.10.1016/S0921-5093(98)01132-0 ↗
10. S. Ghosh, Z. Nowak, and K. Lee: Acta Mater., 1997, vol. 45 (6), pp. 2215–34.10.1016/S1359-6454(96)00365-5 ↗
11. P. Raghavan, S. Li, and S. Ghosh: Fin. Elem. Anal. Des., 2004, vol. 40 (12), pp. 1619–40.10.1016/j.finel.2003.11.003 ↗
12. C. Kadar, E. Maire, A. Borbely, G. Peix, J. Lendvai, and Z. Rajkovits: Mater. Sci. Eng., A, 2004, vols. 387–389, pp. 321–25.10.1016/j.msea.2004.03.091 ↗
13. J.S. Chen and S. Mehraeen: Proc. IMECE, Anaheim, CA, Nov. 13–19, 2004.
14. J. Alkemper and P.W. Voorhees: Acta Mater., 2001, vol. 49 (5), pp. 897–902.10.1016/S1359-6454(00)00355-4 ↗
15. H. Singh and A.M. Gokhale: Mater. Characterization, 2005, vol. 54 (1), pp. 21–29.10.1016/j.matchar.2004.10.002 ↗
16. S. Ghosh, M. Li, S. Moorthy, and K. Lee: Mater. Sci. Eng., A, 1998, vol. 249 (1–2), pp. 62–70.10.1016/S0921-5093(98)00564-4 ↗
17. M.V. Kral and G. Spanos: Scripta Mater., 1997, vol. 36 (8), pp. 875–82.10.1016/S1359-6462(96)00498-8 ↗
18. Y.X. Gao, J.Z. Yi, P.D. Lee, and T.C. Lindley: Acta Mater., 2004, vol. 52 (19), pp. 5435–49.10.1016/j.actamat.2004.07.035 ↗
19. N. Chawla, V.V. Ganesh, and B. Wunsch: Scripta Mater., 2004, vol. 51 (2), pp. 161–65.10.1016/j.scriptamat.2004.03.043 ↗
20. J.E. Spowart, H.M. Mullens, and B.T. Puchala: JOM, 2003, vol. 10, pp. 35–37.10.1007/s11837-003-0173-0 ↗
21. R.H. Bossi, J.L. Cline, and G.E. Georgeson: Report No. WL-TR-91-4102, Wright Laboratory, 1992.
22. J.Y. Buffiere, E. Maire, P. Cloetens, G. Lormand, and R. Fourgeres: Acta Mater., 1999, vol. 47 (5), pp. 1613–25.10.1016/S1359-6454(99)00024-5 ↗
23. A. Elmoutaouakkil, G. Fuchs, P. Bergounhon, R. Peres, and F. Peyrin: J. Phys. D: Appl. Phys., 2003, vol. 36 (10A), pp. A37-A43.10.1088/0022-3727/36/10A/308 ↗
24. M. Gonzalez, G. Dominguez, and C. Bathias: ASTM J. Compos. Technol. Res., 2000, vol. 22 (1), pp. 45–48.10.1520/CTR10624J ↗
25. A. Guvenilir and S.R. Stock: Fatigue Fract. Eng. Mater. Struct., 1998, vol. 21 (4), pp. 439–50.10.1046/j.1460-2695.1998.00062.x ↗
26. E. Maire, L. Babout, J.Y. Buffiere, and R. Fougeres: Mater. Sci. Eng., A, 2001, vols. 319–321, pp. 216–19.10.1016/S0921-5093(01)00924-8 ↗
27. L. Salvo, P. Cloetens, E. Maire, S. Zabler, J.J. Blandin, J.Y. Buffiere, W. Ludwig, E. Boller, D. Bellet, and C. Josserond: Nucl. Instrum. Methods Phys. Res., Sect. B, 2003, vol. 200, pp. 273–86.10.1016/S0168-583X(02)01689-0 ↗
28. L. Babout, E. Maire, and R. Fougeres: Acta Mater., 2004, vol. 52 (8), pp. 2475–87.10.1016/j.actamat.2004.02.001 ↗
29. L. Babout, P.M. Mummery, T.J. Marrow, A. Tzelepi, and P.J. Withers: Carbon, 2005, 43 (4), pp. 765–74.10.1016/j.carbon.2004.11.002 ↗
30. H. Bart-Smith, A.-F. Bastawros, D.R. Mumm, A.G. Evans, D.J. Sypeck, and H.N.G. Wadley: Acta Mater., 1998, vol. 46 (10), pp. 3583–92.10.1016/S1359-6454(98)00025-1 ↗
31. J.P. Weiler, J.T. Wood, R.J. Klassen, E. Maire, R. Berkmortel, and G. Wang: Mater. Sci. Eng., A, 2005, vol. 395 (1–2), pp. 315–22.10.1016/j.msea.2004.12.042 ↗
32. O.B. Olurin, M. Arnold, C. Korner, and R.F. Singer: Mater. Sci. Eng., A, 2002, vol. 328 (1–2), pp. 334–43.10.1016/S0921-5093(01)01809-3 ↗
33. T.G. Nieh, K. Higashi, and J. Wadsworth: Mater. Sci. Eng., A, 2000, vol. 283 (1–2), pp. 105–10.10.1016/S0921-5093(00)00623-7 ↗
34. R.W. Hamilton, M.F. Forster, R.J. Dashwood, and P.D. Lee: Scripta Mater., 2002, vol. 46 (1), pp. 25–29.10.1016/S1359-6462(01)01190-3 ↗
35. I.G. Watson, M.F. Forster, P.D. Lee, R.J. Dashwood, R.W. Hamilton, and A. Chirazi, Comp. A., 2005, vol. 36, pp. 1177–87.10.1016/j.compositesa.2005.02.003 ↗
36. E.J. Garboczi: Cem. Concr. Res., 2002, vol. 32 (10), pp. 1621–38.10.1016/S0008-8846(02)00836-0 ↗
37. P. Kenesei, A. Borbely, and H. Biermann: Mater. Sci. Eng., A, 2004, vols. 387–389, pp. 852–56.10.1016/j.msea.2004.02.076 ↗
38. J.E. Hatch: Aluminium Properties and Physical Metallurgy, 6th ed., ASM, Metals Park, OH, 1984, pp. 235–36.
39. E.J. Minay, H.B. McShane, and R.D. Rawlings: Intermetallics, 2004, vol. 12 (1), pp. 75–84.10.1016/j.intermet.2003.09.009 ↗
40. A.C. Kak and M. Slaney: Principles of Computerized Tomographic Imaging, SIAM, New York, NY, 2001, pp. 100–08.10.1137/1.9780898719277 ↗
41. L.A. Feldkamp, L.C. Davis, and J.W. Kress: J. Opt. Soc. Am. A, 1984, vol. 1, pp. 612–19.10.1364/JOSAA.1.000612 ↗
42. H.K. Hong, C.S. Liu, Y.P. Shiao, and B.C. Shih: J. Eng. Mater. Technol. (Trans. ASME), 2002, vol. 124 (3), pp. 314–21.10.1115/1.1479355 ↗
43. L. Zhonghua, S. Schmauder, A. Wanner, and M. Dong: Scripta Metall. Mater., 1995, vol. 33 (8), pp. 1289–94.10.1016/0956-716X(95)00356-Z ↗
44. E.J. Garboczi and A.R. Day: J. Mech. Phys. Solids, 1995, vol. 43 (13), pp. 49–62.
45. W.E. Lorensen and H.E. Cline: Comp. Graphs, 1987, vol. 213 (1), pp. 63–69.
46. P.J. Withers: University of Manchester, Manchester, UK, Personal communication, Application of X-ray tomography to study fracture and crack growth workshop, Cambridge, 2005.
47. E.E. Underwood: in Quantitative Microscopy, DeHoff and Rhines, McGraw-Hill Book Company, New York, NY, 1968, pp. 149–200
48. X.D. Ding, Z.H. Jiang, J. Sun, J.S. Lian, and L. Xiao: Comp. Sci. Technol., 2002, 62 (6), pp. 841–50.10.1016/S0266-3538(02)00160-4 ↗
49. E. Soppa, S. Schmauder, G. Fischer, J. Brollo, and U. Weber: Comput. Mater. Sci, 2003, vol. 28 (3–4), pp. 574–86.10.1016/j.commatsci.2003.08.034 ↗
50. L.Z. Sun, J.W. Ju, and H.T. Liu: Mech. Mater., 2003, vol. 35 (3–6), pp. 559–69.10.1016/S0167-6636(02)00276-4 ↗
51. J. Segurado and J. LLorca: Acta Mater., vol. 53, pp. 4931–42.10.1016/j.actamat.2005.07.013 ↗