journal article·2007-02

Characterization of Aging Behavior in M250 Grade Maraging Steel Using Ultrasonic Measurements

K.V. Rajkumar, Anish Kumar, T. Jayakumar, Baldev Raj, K.K. Ray

Publisher page

Abstract

Ultrasonic measurements have been carried out in M250 grade maraging steel specimens subjected to solution annealing at 1093 K for 1 hour followed by aging at 755 K for various durations in the range of 0.25 to 100 hours. The influence of aging on microstructure, room temperature hardness, and ultrasonic parameters (longitudinal and shear wave velocities and Poisson’s ratio) has been studied in order to derive correlations among these parameters in aged M250 maraging steel. Both hardness and ultrasonic velocities exhibit almost similar behaviors with aging time. They increase with the precipitation of intermetallic phases, Ni3Ti and Fe2Mo, and decrease with the reversion of martensite to austenite. Ultrasonic shear wave velocity is found to be more influenced by the precipitation of intermetallic phases, whereas longitudinal wave velocity is influenced more by the reversion of martensite to austenite. Unlike hardness and ultrasonic velocities, the Poisson’s ratio exhibits a monotonous decrease with aging time and, hence, can be used for unambiguous monitoring of the aging process in M250 maraging steel. Further, none of the parameters, i.e., hardness, ultrasonic velocity, or Poisson’s ratio, alone could identify the initiation of the reversion of austenite at early stage; however, the same could be identified from the correlation between ultrasonic velocity and Poisson’s ratio, indicating the advantage of using the multiparametric approach for comprehensive characterization of complex aging behavior in M250 grade maraging steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. G.P. Miller, W.I. Mitchell: J. Iron Steel Inst., 1965, vol. 203, pp. 899–904.
2. D.T. Peters, C.R. Cupp: Trans. TMS-AIME, 1966, vol. 236, pp. 1420–29
3. V.K. Vasudevan, S.J. Kim, C.M. Wayman: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 2655–6810.1007/BF02646061 ↗
4. W. Sha, A. Cerezo, G.D.W. Smith: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1221–3210.1007/BF02668190 ↗
5. S. Floreen, R.F. Decker: in Source Book on Maraging Steels, R.F. Decker, ed., ASM, Metals Park, OH, 1979, pp. 20–32
6. R.F. Decker, S. Floreen: in Maraging Steels: Recent Developments and Applications, R.K. Wilson, ed., TMS-AIME, Warrendale, PA, 1988, pp. 1–38
7. U.K. Viswanathan, G.K. Dey, M.K. Asundi: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2429–4210.1007/BF02646522 ↗
8. W.A. Spitzig, J.M. Chilton, C.J. Barton: Trans. ASM, 1968, vol. 61, pp. 299–303
9. W. Sha, A. Cerezo, G.D.W. Smith: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1233–3910.1007/BF02668191 ↗
10. W. Sha, A. Cerezo, G.D.W. Smith: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1241–4910.1007/BF02668192 ↗
11. W. Sha, A. Cerezo, G.D.W. Smith: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1251–5610.1007/BF02668193 ↗
12. Z. Guo, W. Sha, D. Vaumousse: Acta Mater., 2003, vol. 51, pp. 101–1610.1016/S1359-6454(02)00353-1 ↗
13. H.M. Ledbetter, M.W. Austin: Mater. Sci. Eng., 1985, vol. 72, pp. 65–6910.1016/0025-5416(85)90067-9 ↗
14. Baldev Raj, V. Moorthy, T. Jayakumar, K. Bhanu Sankara Rao: Int. Mater. Rev., 2003, vol. 48 (5), pp. 273–325.10.1179/095066003225010254 ↗
15. T. Jayakumar, Baldev Raj, H. Willems, W. Arnold: Review of Progress in Quantitative, vol. 10b, NDE, Plenum Press, New York, NY, 1991, pp. 1693–1700.
16. T. Jayakumar: Ph.D. Thesis, University of Saarland, Saarbruecken, Germany, 1997
17. Anish Kumar, B.K. Choudhary, T. Jayakumar, K. Bhanu, Sankara Rao, Baldev Raj: Mater. Sci. Technol., 2003, vol. 19 (5), pp. 637–4110.1179/026708303225002037 ↗
18. M. Rosen, E. Horowitz, S. Fick, R.C. Reno, R. Mehrabian: Mater. Sci. Eng., 1982, vol. 53, pp. 163–67.10.1016/0025-5416(82)90049-0 ↗
19. M. Rosen, L. Ives, S. Ridder, F. Biancaniello, R. Mehrabian: Mater. Sci. Eng., 1985, vol. 74, pp. 1– 10.10.1016/0025-5416(85)90104-1 ↗
20. Anish Kumar, Vani Shankar, K. Bhanu Sankara Rao, T. Jayakumar, Baldev Raj: Phil. Mag. A, 2002, vol. 82 (13), pp. 2529–4210.1080/01418610208240051 ↗
21. B. Hutchinson, B. Moss, A. Smith, A. Astill, C. Scruby, G. Engberg, J. Bjorklund: Ironmaking and Steelmaking (UK), 2002, vol. 1 (29), pp. 77–8010.1179/030192302225001910 ↗
22. Anish Kumar, T. Jayakumar, Baldev Raj, K.K. Ray: Mater. Sci. Eng. A, 2003, vol. 360, pp. 58–6410.1016/S0921-5093(03)00495-7 ↗
23. Non -Destructive Testing Handbook: Ultrasonic Testing, 2nd ed., Paul McIntrie, ed., ASTM, Philadelphia, PA, 1991, vol. 7, p. 836
24. P. Li, S.L Chu, C.P. Chou F.C. Chen: Scripta Metall. Mater., 1992, vol. 26, pp. 127–3210.1016/0956-716X(92)90383-P ↗
25. Anish Kumar, T. Jayakumar, Baldev Raj, K.K. Ray: Acta Mater., 2003, vol. 51, pp. 2417–2610.1016/S1359-6454(03)00054-5 ↗
26. Anish Kumar, K.V. Rajkumar, T. Jayakumar, Baldev Raj, B. Mishra: J. Nucl. Mater., 2006, vol. 350, pp. 284–9210.1016/j.jnucmat.2006.01.011 ↗