journal article·2014-03

Effect of Residual Stress and Strain-Induced α′-Martensite on Delayed Cracking of Metastable Austenitic Stainless Steels

Suvi Papula, Juho Talonen, Hannu Hänninen

Publisher page

Abstract

The role of residual stresses and strain-induced α′-martensite in delayed cracking of metastable austenitic stainless steels was studied by means of Swift cup tests, measurement of residual stresses by X-ray diffraction and ring slitting, and α′-martensite content determination. Low-Ni, high-Mn austenitic stainless steels, e.g., AISI 201, were compared with Fe-Cr-Ni austenitic stainless steels. The presence of α′-martensite seemed to be a necessary prerequisite for delayed cracking to occur in austenitic stainless steels with typical internal hydrogen concentrations (<5 ppm). Stable low-Ni austenitic stainless steel was not prone to delayed cracking. The low-Ni metastable grades showed more severe cracking at lower degree of deformation and lower volume fraction of α′-martensite than that of the metastable 300-series grades. The limiting α′-martensite content, below which delayed cracking did not occur, decreased along with the nickel content of the material. The strain-induced martensitic transformation substantially increased the magnitude of residual stresses in deep-drawn cups. One explanation for high sensitivity of the low-Ni grades to delayed cracking after deep drawing is their higher residual stresses compared to that of the Fe-Cr-Ni grades. Alloying elements of the stainless steels, nickel, and carbon in particular, influence the sensitivity to delayed cracking through their effect on the properties of the α′-martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A. Zinbi and A. Bouchou: Eng. Failure Anal., 2010, vol.17, pp. 1028-1037.10.1016/j.engfailanal.2009.11.007 ↗
2. A. Frehn and W. Bleck: Stainless Steel World, 2003, Jan/Feb, pp. 40–45.
3. ASM International: ASM Handbook, Failure Analysis and Prevention, vol. 11, ASM International, Materials Park, OH, 2002, pp. 809–22.
4. S. Singh and C. Altstetter: Metall. Trans. A, 1982, vol. 13A, pp. 1799-1808.10.1007/BF02647836 ↗
5. Y. Yuying, L. Chunfeng and X. Hongzhi: J. Mater. Process. Technol., 1992, vol. 30, pp. 167-172.10.1016/0924-0136(92)90344-R ↗
6. H. Hänninen and T. Hakkarainen: Corrosion, 1980, vol. 36, pp. 47-51.10.5006/0010-9312-36.1.47 ↗
7. W.-Y. Chu, J. Yao and C.-M. Hsiao: Metall. Trans. A, 1984, vol. 15A, pp. 729-733.10.1007/BF02644204 ↗
8. C. San Marchi, B.P. Somerday, X. Tang and G.H. Schiroky: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 889-904.10.1016/j.ijhydene.2007.10.046 ↗
9. T. Kanezaki, C. Narazaki, Y. Mine, S. Matsuoka and Y. Murakami: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 2604-2619.10.1016/j.ijhydene.2008.02.067 ↗
10. L. Zhang, M. Wen, M. Imade, S. Fukuyama and K. Yokogawa: Acta Mater., 2008, vol. 56, pp. 3414-3421.10.1016/j.actamat.2008.03.022 ↗
11. M.R. Berrahmoune, S. Berveiller, K. Inal and E. Patoor: Mater. Sci. Forum, 2006, vol. 524-525, pp. 95-100.10.4028/www.scientific.net/MSF.524-525.95 ↗
12. M. Martin, S. Weber, C. Izawa, S. Wagner, A. Pundt and W. Theisen: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 11195-11206.10.1016/j.ijhydene.2011.05.133 ↗
13. Z. Wang and B. Gong: Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park, Ohio, 2002, pp 141-149.
14. J. Talonen: Doctoral Dissertation, Helsinki University of Technology, 2007.
15. J. Post, K. Datta and J. Beyer: J. Mater. Sci. Eng. A, 2008, vol. 485, pp. 290-298.10.1016/j.msea.2007.07.084 ↗
16. M.R. Berrahmoune, S. Berveiller, K. Inal and E. Patoor: J. Mater. Sci. Eng. A, 2006, vol. 438-440, pp. 262-266.10.1016/j.msea.2006.02.189 ↗
17. Y.V. Taran, M.R. Daymond and J. Schreiber: Physica B, 2004, vol. 350, pp. 98-101.10.1016/j.physb.2004.04.004 ↗
18. J. Johansson and M. Odén: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1557-1570.10.1007/s11661-000-0166-3 ↗
19. Y.D. Wang, R. Lin, Peng, X.-L. Wang and R.L. McGreevy: Acta Mater., 2002, vol. 50, pp. 1717-1734.10.1016/S1359-6454(02)00021-6 ↗
20. M.R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin and E. Patoor: J. Mater. Sci. Eng. A 2004, vol. 378, pp. 304-307.10.1016/j.msea.2003.10.372 ↗
21. L. Che, M. Gotoh, Y. Horimoto and Y. Hirose: J. Iron Steel Res. Int., 2007, vol.14, pp. 31-38.10.1016/S1006-706X(07)60054-5 ↗
22. J. Charles, A. Kosmac, J. Krautschick, J. Simón, N. Suutala, and T. Taulavuori: Materials and Applications Series, vol. 12, The European Stainless Steel Development Association, Brussels, Belgium, 2010, pp. 9–11.
23. W. Schaller, T.E. Schmid and E. Snape: Sheet Met. Ind., 1972, vol. 10, pp. 621-624.
24. L. Zhang, M. Imade, B. An, M. Wen, T. Iljima, S. Fukuyama and K. Yokogawa: ISIJ Int., 2012, vol. 52, pp. 240-246.10.2355/isijinternational.52.240 ↗
25. S.M. Teus, V.N. Shyvanyuk and V.G. Gavriljuk: J. Mater. Sci. Eng. A, 2008, vol. 497, pp. 290-294.10.1016/j.msea.2008.07.003 ↗
26. K. Hoshino: Trans. ISIJ, 1980, vol. 20, pp. 147-153.10.2355/isijinternational1966.20.147 ↗
27. S. Curtze, V.-T. Kuokkala, A. Oikari, J. Talonen and H. Hänninen: Acta Mater., 2011, vol. 59, pp. 1068-1076.10.1016/j.actamat.2010.10.037 ↗
28. J. Talonen, P. Aspegren and H. Hänninen: Mater. Sci. Technol., 2004, vol. 20, pp. 1506-1512.10.1179/026708304X4367 ↗
29. T. Gartka and T. Dyl: Arch. Metall. Mater., 2006, vol. 51, pp. 199-203.
30. H.W. Walton: Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park, Ohio, 2002, pp. 89-98.
31. T. Michler, J. Naumann and E. Sattler: Int. J. Hydrogen Energy, 2012, vol. 37, pp. 12765-12770.10.1016/j.ijhydene.2012.06.058 ↗
32. G. Dini, A. Najafizadeh, S.M. Monir-Vaghefi and R. Ueji: J. Mater. Sci. Technol., 2010, vol. 26, pp. 181-186.10.1016/S1005-0302(10)60030-8 ↗
33. A. Kisko, R.D.K. Misra, J. Talonen and L.P. Karjalainen: J. Mater. Sci. Eng. A, 2013, vol. 578, pp. 408-416.10.1016/j.msea.2013.04.107 ↗
34. Y. Matsuoka, T. Iwasaki, N. Nakada, T. Tsuchiyama and S. Takaki: ISIJ Int., 2013, vol. 53, pp. 1224-1230.10.2355/isijinternational.53.1224 ↗
35. Q. Luo and A.H. Jones: Surf. Coat. Technol., 2010, vol. 205, pp. 1403-1408.10.1016/j.surfcoat.2010.07.108 ↗
36. K. Kapoor, D. Lahiri, C. Padmaprabu and T. Sanyal: J. Nucl. Mater., 2002, vol. 303, pp. 147-155.10.1016/S0022-3115(02)00818-8 ↗