Notch-Fatigue Properties of Advanced TRIP-Aided Bainitic Ferrite Steels
Source abstract
Abstract
To develop a transformation-induced plasticity (TRIP)-aided bainitic ferrite steel (TBF steel) with high hardenability for a common rail of the next generation diesel engine, 0.2 pct C-1.5 pct Si-1.5 pct Mn-0.05 pct Nb TBF steels with different contents of Cr, Mo, and Ni were produced. The notch-fatigue strength of the TBF steels was investigated and was related to the microstructural and retained austenite characteristics. If Cr, Mo, and/or Ni were added to the base steel, then the steels achieved extremely higher notch-fatigue limits and lower notch sensitivity than base TBF steel and the conventional structural steels. This was mainly associated with (1) carbide-free and fine bainitic ferrite lath structure matrix without proeutectoid ferrite, (2) a large amount of fine metastable retained austenite, and (3) blocky martensite phase including retained austenite, which may suppress a fatigue crack initiation and propagation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. T. Furukawa: Mater. Sci. Tech., 1989, vol. 5, pp. 465–70.10.1179/026708389790222357 ↗
2. U. Brux, G. Frommeyer, O. Grassel, L.W. Meyer, and A. Weise: Steel Res., 2002, vol. 73, pp. 294–98.10.1002/srin.200200211 ↗
3. W. Cao, J. Shi, C. Wang, L. Xu, M. Wang, and H. Dong: Proc. of ICAS 2010, Metall. Ind. Press, Beijing, China, 2010, pp. 196–215.
4. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Solid State Mater. Sci., 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
5. K. Sugimoto, T. Iida, J. Sakaguchi, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902–08.10.2355/isijinternational.40.902 ↗
6. K. Sugimoto, J. Sakaguchi, T. Iida, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 920–26.10.2355/isijinternational.40.920 ↗
7. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto, T. Kashima, and S. Ikeda: ISIJ Int., 2001, vol. 42, pp. 910–15.10.2355/isijinternational.42.910 ↗
8. K. Sugimoto, M. Murata, and S. Song: ISIJ Int., 2010, vol. 50, pp. 162–68.10.2355/isijinternational.50.162 ↗
9. S. Song, K. Sugimoto, S. Kandaka, A. Futamura, M. Kobayashi, and S. Masuda: Mater. Sci. Res. Int., 2003, vol. 9, pp. 223–29.
10. K. Sugimoto, J. Tsuruta, and S. Song: Key Eng. Mater., 2007, vols. 345–346, pp. 247–50.10.4028/www.scientific.net/KEM.345-346.247 ↗
11. S. Song, K. Sugimoto, M. Kobayashi, H. Matsubara, and T. Kashima: Tetsu-to-Hagané, 2000, vol. 86, pp. 563–69.10.2355/tetsutohagane1955.86.8_563 ↗
12. T. Hojo, K. Sugimoto, Y. Mukai, and S. Ikeda: ISIJ Int., 2008, vol. 48, pp. 824–29.10.2355/isijinternational.48.824 ↗
13. M.A. Grossman: Trans. AIME, 1942, vol. 150, pp. 226–59.
14. J.H. Hollomon and L.D. Jaffe: Trans. AIME, 1946, vol. 167, pp. 601–16.
15. H. Maruyama: J. Jpn. Soc. Heat Treat., 1977, vol. 17, pp. 198–204.
16. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
17. O. Umezawa: J. Jpn. Inst. Light Met., 2000, vol. 50, pp. 86–93.10.2464/jilm.50.86 ↗
18. J. Kobayashi, D. Ina, N. Yoshikawa, and K. Sugimoto: ISIJ Int., in press.
19. G.E. Dieter: Mechanical Metallurgy (SI Metric Edition), McGraw-Hill Book Co., London, U.K., 1988, p. 403.
20. T. Majima, M. Anzai, and H. Nakazawa: Trans. Jpn Soc. Mech. Eng. A, 1986, vol. 52, pp. 1171–76.10.1299/kikaia.52.1171 ↗