Impact Response and Microstructural Evolution of Biomedical Titanium Alloy under Various Temperatures
Source abstract
Abstract
A compressive split-Hopkinson pressure bar and transmission electron microscope (TEM) are used to investigate the mechanical behavior and microstructural evolution of biomedical Ti alloy deformed at strain rates ranging from 8 × 10 2 s −1 to 8 × 10 3 s −1 at temperatures between 25 °C and 900 °C. In general, the results indicate that the mechanical behavior and microstructural evolution of the alloy are highly sensitive to both the strain rate and the temperature conditions. The flow-stress curves are found to include both a work-hardening region and a work-softening region. The strain-rate-sensitivity parameter, β , increases with increasing strain and strain rate but decreases with increasing temperature. The activation energy varies inversely with the flow stress and has a low value at high deformation strain rates and low temperatures. Microstructural observations reveal that the strengthening effect evident in the deformed alloy is a result primarily of dislocations and the formation of α phase. The dislocation density increases with increasing strain rate but decreases with increasing temperature. Additionally, the square root of the dislocation density varies linearly with the flow stress. Correlating the mechanical properties of the biomedical Ti alloy with the TEM observations, it is inferred that the precipitation of α phase dominates the fracture strain. Transmission electron microscope observations reveal that the amount of α phase increases with increasing temperature below the β -transus temperature. The maximum amount of α phase is formed at a temperature of 700 °C and results in the minimum fracture strain observed under the current loading conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. S.G. Steinemann: Ti Sci. Technol., 1984, vol. 2, pp. 1327–34
2. H.S. Dobbs and J.T. Scales: Annual book of ASTM Standard, ASTM, Philadelphia, PA, 1983, pp. 173–86
3. K.G. Nichols, D.A. Puleo: J. Biomed. Mater. Res., 1997, vol. 35, pp. 256–7110.1002/(SICI)1097-4636(199705)35:2<265::AID-JBM14>3.0.CO;2-G ↗
4. M. Katsuhiko, D. Kenji, M. Tomiharu, S. Yoshio: Mater. Trans., 2002, vol. 43, pp. 2936–4210.2320/matertrans.43.2936 ↗
5. H.M. Kim, H. Takadama, T. Kokubo, S. Nishiguchi, T. Nakamura: Biomaterials, 2000, vol. 21, pp. 353–5810.1016/S0142-9612(99)00190-8 ↗
6. B.M. Butcher, C.H. Karnes: J. Appl. Phys., 1964, vol. 37, pp. 402–1110.1063/1.1707848 ↗
7. F.E. Hauser: Exp. Mech., 1966, vol. 6, pp. 395–40210.1007/BF02326284 ↗
8. M. Meyers, Y.J. Chen, F.D.S. Marquis, D.S. Kim: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2493–50110.1007/BF02669407 ↗
9. A.M. Bragov, A.K. Lomunov: Int. J. Impact Eng., 1995, vol. 16, pp. 321–3010.1016/0734-743X(95)93939-G ↗
10. W.S. Lee, C.F. Lin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2801–1010.1007/s11661-002-0265-4 ↗
11. L.E. Murr: Scripta Metall., 1978, vol. 12, pp. 201–0610.1016/0036-9748(78)90164-3 ↗
12. W.S. Lee, J.C. Shyu, S.T. Chiou: Scripta Mater., 2000, vol. 42, pp. 51–5610.1016/S1359-6462(99)00308-5 ↗
13. R. Boyer, G. Welsch, E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM, Materials Park, OH, 1994, pp. 949–56
14. M. Ikeda, S.Y. Komatsu, T. Sugimoto, M. Hasegawa: Mater. Sci. Eng. A, 1998, vol. 243, pp. 140–4510.1016/S0921-5093(97)00791-0 ↗
15. S.Y. Komatsu, M. Ikeda, T. Sugimoto, K. Kamei, O. Maesaki, M.A. Kojima: Mater. Sci. Eng. A, 1996, vol. 213, pp. 61–6510.1016/0921-5093(96)10228-8 ↗
16. O.M. Ivasishin, P.E. Markovsky, S.L. Semiatin, C.H. Ward: Mater. Sci. Eng. A, 2005, vol. 405, pp. 296–30510.1016/j.msea.2005.06.027 ↗
17. U.S. Lindholm: J. Mech. Phys. Sol., 1964, vol. 12, pp. 317–3510.1016/0022-5096(64)90028-6 ↗
18. J.L. Chiddister, L.E. Malvern: Exp. Mech., 1963, vol. 3, pp. 81–9010.1007/BF02325890 ↗
19. W.S. Lee, C.F. Lin: Mater. Sci. Eng. A, 1998, vol. 241, pp. 48–5910.1016/S0921-5093(97)00471-1 ↗
20. D.R. Chichili, K.T. Ramesh, K.J. Hemker: Acta Mater., 1998, vol. 46 (3), pp. 1025–4310.1016/S1359-6454(97)00287-5 ↗
21. K.T. Ramesh: Metall. Mater. Trans. A, 2002, vol. 33, pp. 927–3510.1007/s11661-002-0162-x ↗
22. A.S. Khan, Y.S. Suh, R. Kazmi: Int. J. Plast., 2004, vol. 20, pp. 2233–4810.1016/j.ijplas.2003.06.005 ↗
23. G. Regazzoni, U.F. Kocks, P.S. Follansbee: Acta Metall., 1987, vol. 35, pp. 2865–7510.1016/0001-6160(87)90285-9 ↗
24. P.S. Follansbee, U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 81–9310.1016/0001-6160(88)90030-2 ↗
25. W.S. Lee, C.F. Lin: Metall. Mater. Trans. A, 2002, vol. 33, pp. 2801–1010.1007/s11661-002-0265-4 ↗
26. F.J. Zerilli, R.W. Armstrong: Acta Metall. Mater., 1992, vol. 40, pp. 1803–0810.1016/0956-7151(92)90166-C ↗
27. S.S. Egg, Y.Q. Sue, P.B. Hirsch: Mater. Sci. Eng. A, 1995, vols. 192–193, pp. 45–52
28. G. Regazzoni, U.F. Kocks, P.S. Follansbee: Acta Metall., 1987, vol. 35, pp. 2865–7510.1016/0001-6160(87)90285-9 ↗
29. H. Conrad, H. Wiedersich: Acta Metall., 1960, vol. 8, pp. 128–3010.1016/0001-6160(60)90097-3 ↗
30. L. Shi and D.O. Northwood: Acta Metall. Mater., 1995, vol. 43, pp. 453–6010.1016/0956-7151(94)00279-Q ↗
31. A. Gilat, X. Wu: Int. J. Plast., 1997, vol. 13, pp. 611–3210.1016/S0749-6419(97)00028-4 ↗
32. A.J. Boehlert: Mater. Sci. Eng. A, 1989, vol. 267, pp. 82–9810.1016/S0921-5093(99)00024-6 ↗
33. A.A. Morrone: Ph.D. Dissertation, Brown University, Providence, RI, 1986, p. 34
34. W.S. Lee, C.Y. Liu: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3175–8610.1007/s11661-005-0088-1 ↗
35. S.Y. Komatsu, M. Ikeda, T. Sugimoto, K. Kamei, O. Maesaki, M.A. Kojima: Mater. Sci. Eng. A, 1996, vol. 213, pp. 61–6510.1016/0921-5093(96)10228-8 ↗
36. G.H. Narayanan, T.F. Archbold: Metall. Trans., 1970, vol. 1, pp. 2281–9010.1007/BF02643446 ↗
37. G.G. Yapici, I. Karaman, Z.P. Luo, H. Rack: Scripta Mater., 2003, vol. 49, pp. 1021–2710.1016/S1359-6462(03)00484-6 ↗
38. R.K. Ham: Philos. Mag., 1961, vol. 6, pp. 1183–8410.1080/14786436108239679 ↗
39. T. Nishimura, M. Nishigaki, and Y. Moriguchi: R&D Technical Report, Kobe Steel, Chuo-Ku, Kobe, Japan, 1982, vol. 32, pp. 52–55