Early-stage widmanstatten growth of the γ phase in a duplex steel
Source abstract
Abstract
The present work studies the Widmanstatten γ-phase morphology and crystallographic orientation relationships with ferrite during its initial-stage growth in a duplex steel. Transmission electron microscopy (TEM) and convergent-beam electron diffraction (CBED) analyses have been applied to determine the orientation relationships with high precision. When the secondary γ phase and the α phase have special orientation relationships close to the K-S (Kurdjumov-Sachs) relation, the preferential growth involves γ phase, protruding into α phase and this leads, finally, to the formation of Widmanstatten needles. The needles grow nearly along the invariant-line direction, but they do not satisfy exactly the K-S relation, and a slight angular deviation (ϑ [110]α ) is always present. This deviation is explained by a compromise between the well-known invariant-line condition, which offers the easiest way for directional growth of the γ phase, and a good atomic matching of the close-packed (111) γ and (110) α planes of both phases. A matching minimum at ϑ [110]α = 2.3 deg is obtained when only three pairs of the nearest-neighbor atoms are considered in an atomic misfit calculation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. U. Dahmen, P. Ferguson, and K.H. Westmacott: Acta Metall., 1984, vol. 32, pp. 803–10.10.1016/0001-6160(84)90153-6 ↗
2. C.P. Luo and G.C. Weatherly: Acta Metall., 1989, vol. 37, pp. 791–801.10.1016/0001-6160(89)90006-0 ↗
3. K. Ameyama and T. Maki: Scripta Metall., 1990, vol. 24, pp. 173–78.10.1016/0956-716X(90)90587-7 ↗
4. K. Ameyama, G.C. Weatherly, and K.T. Aust: Acta Metall., 1992, vol. 40, pp. 1835–46.10.1016/0956-7151(92)90170-J ↗
5. C.H. Shek, G.J. Shen, J.K.L. Lai, and B.J. Duggan: Mater. Sci. Technol., 1994, vol. 10, pp. 306–11.10.1179/mst.1994.10.4.306 ↗
6. C.F. Willis, R. Gronsky, and T.M. Devine: Metall. Trans. A, vol. 22A, pp. 2889–2902.10.1007/BF02650250 ↗
7. E.S.K. Menon and H.I. Aaronson: Acta Metall., 1987, vol. 35, pp. 549–63.10.1016/0001-6160(87)90179-9 ↗
8. U Dahmen: Acta Metall., 1982, vol. 30, pp. 63–73.10.1016/0001-6160(82)90045-1 ↗