journal article·2008-02

Microstructure Characterization and Creep Behavior of Pb-Free Sn-Rich Solder Alloys: Part I. Microstructure Characterization of Bulk Solder and Solder/Copper Joints

R.S. Sidhu, N. Chawla

Publisher page

Abstract

Solders are used as interconnect materials in microelectronic packaging. Traditionally, eutectic and near-eutectic Pb-Sn solder alloys have been used. Due to the toxic nature of lead, environmentally-benign Sn-rich (Pb-free) solders are being developed. In this two part series of articles, we have focused on elucidating the relationship between microstructure and creep behavior of Sn-rich alloys, both in bulk form and at the solder sphere joint level. Part I of our study focuses on a detailed quantitative analysis of the effect of controlled cooling rates on solder microstructures. Bulk solder microstructures from cast bars were compared to smaller solder joint microstructures, reflowed from single solder spheres about 1 mm in diameter. Faster cooling rates resulted in much finer secondary dendrite size and spacing, as well as a much finer distribution of Ag3Sn and Cu6Sn5 particles. The companion article, Part II, provides a unified mechanistic understanding of the creep behavior for the Sn-rich solder alloys, intimately linked to the microstructure characterization work reported in Part I.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. J. Glazer: Int. Mater. Rev., 1995, vol. 40, pp. 65–9310.1179/imr.1995.40.2.65 ↗
2. W.J. Plumbridge, C.R. Gagg, S. Peters: J. Electron. Mater., 2001, vol. 30, pp. 1178–8310.1007/s11664-001-0147-3 ↗
3. J.W. Jang, A.P. De Silva, T.Y. Lee, J.K. Lee, D.R. Frear: Appl. Phys. Lett., 2001, vol. 79, pp. 482–8410.1063/1.1388160 ↗
4. K.J. Puttlitz, K.A. Stalter: Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, Marcel Dekker Inc., New York, NY, 2004, p. 21110.1201/9780203021484 ↗
5. C.M.L. Wu, M.L. Huang: J. Electron. Mater., 2002, vol. 31, pp. 442–4810.1007/s11664-002-0098-3 ↗
6. M.D. Mathew, H. Yang, S. Movva, K.L. Murty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 99–10510.1007/s11661-005-0142-z ↗
7. H. Mavoori, J. Chin, S. Vaynman, B. Morgan, L. Keer, M. Fine: J. Electron. Mater., 1997, vol. 26, pp. 783–9010.1007/s11664-997-0252-z ↗
8. T.B. Massalski: Binary Alloy Phase Diagrams, ASM International, Materials Park, OH, 1990, pp. 1481–83
9. P. Villars, A. Prince, H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM International, Materials Park, OH, 1995, pp. 2336–42
10. Z. Mei, J.W. Morris Jr.: J. Electron. Mater., 1991, vol. 21, pp. 401–0710.1007/BF02660403 ↗
11. W.K. Choi, H.M. Lee: J. Electron. Mater., 2000, vol. 29, p. 120710.1007/s11664-000-0014-7 ↗
12. K. Wu, N. Wade, J. Cui, K. Miyahara: J. Electron. Mater., 2003, vol. 32, pp. 5–810.1007/s11664-003-0245-5 ↗
13. Z. Chen, Y. Shi, Z. Xia: J. Electron. Mater., 2004, vol. 33, pp. 964–7110.1007/s11664-004-0023-z ↗
14. F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, J.P. Lucas, A. Achari, M. Paruchuri: Mater. Sci. Eng. A, 2003, vol. 351, pp. 190–9910.1016/S0921-5093(02)00853-5 ↗
15. F. Ochoa, J.J. Williams, N. Chawla: J. Electron. Mater., 2003, vol. 32, pp. 1414–2010.1007/s11664-003-0109-z ↗
16. W. Yang, L.E. Felton, R.W. Messler: J. Electron, Mater., 1995, vol. 24, pp. 1465–7210.1007/BF02655465 ↗
17. J. Sigelko, S. Choi, K.N. Subramanian, J.P. Lucas, T.R. Bieler: J. Electron. Mater., 1999, vol. 28, pp. 1184–8810.1007/s11664-999-0155-2 ↗
18. K.S. Kim, S.H. Huh, and K. Suganuma: Mater. Sci. Eng. A, 2002, vol. 333, pp. 106–1410.1016/S0921-5093(01)01828-7 ↗
19. Y.S. Kim, K.S. Kim, C.W. Huang, K. Suganuma: J. Alloys Compd., 2003, vol. 352, pp. 237–5110.1016/S0925-8388(02)01168-4 ↗
20. X. Deng, G. Piotrowski, J.J. Williams, N. Chawla: J. Electron. Mater., 2003, vol. 32, pp. 1403–1310.1007/s11664-003-0108-0 ↗
21. Y.C. Chan, A.C.K. So, J.K.L. Lai: Mater. Sci. Eng. B, 1998, vol. 55, pp. 5–1310.1016/S0921-5107(98)00202-5 ↗
22. P. Protsenko, A. Terlain, V. Traskine, N. Eustathopoulos: Scripta Mater., 2001, vol. 45, pp. 1439–4510.1016/S1359-6462(01)01181-2 ↗
23. D.R. Frear: JOM, 1996, vol. 48, pp. 49–5310.1007/BF03222944 ↗
24. R.E. Pratt, E.I. Stromswold, D.J. Quesnel: J. Electron. Mater., 1994, vol. 23, pp. 375–8110.1007/BF02671217 ↗
25. M. Kerr, N. Chawla: Acta Mater, 2004, vol. 52, pp. 4527–3510.1016/j.actamat.2004.06.010 ↗
26. Y. Kariya, T. Asai, T. Suga: Proc. SPIE, 2005, vol. 5852, pp. 297–30110.1117/12.621538 ↗
27. F. Ochoa, X. Deng, N. Chawla: J. Electron. Mater., 2004, vol. 33, pp. 1596–160710.1007/s11664-004-0103-0 ↗
28. C.M.L. Wu, M.L. Huang: J. Electron. Mater., 2002, vol. 31, pp. 442–4810.1007/s11664-002-0098-3 ↗
29. M.D. Mathew, H. Yang, S. Movva, K.L. Murty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 99–10510.1007/s11661-005-0142-z ↗
30. M. Kerr, N. Chawla: JOM, 2004, vol. 56, pp. 50–5410.1007/s11837-004-0112-8 ↗
31. H. Rhee, F. Guo, J.G. Lee, K.C. Chen, K.N. Subramanian: J. Electron. Mater., 2003, vol. 32, pp. 1257–6410.1007/s11664-003-0020-7 ↗
32. K.C. Chen, A. Telang, J.G. Lee, K.N. Subramanian: J. Electron. Mater., 2002, vol. 31, pp. 1181–8910.1007/s11664-002-0008-8 ↗
33. S.G. Jadhav, T.R. Bieler, K.N. Subramanian, J.P. Lucas: J. Electron. Mater., 2001, vol. 30, pp. 1197–20510.1007/s11664-001-0150-8 ↗
34. J.H. Lau, S.H. Pan, C. Chang: J. Electron. Packag., 2002, vol. 124, pp. 69–7610.1115/1.1400995 ↗
35. H.G. Song, J.W. Morris Jr., F. Hua: JOM, 2002, vol. 56, pp. 30–3210.1007/BF02701846 ↗
36. R. Darveaux, K. Banerji: IEEE Trans. Compon. Hybr., 1992, vol. 15, pp. 1013–2410.1109/33.206925 ↗
37. R.S. Sidhu, X. Deng, N. Chawla: Metall. Mater. Trans. A, 2008, vol. 39A (doi:10.1007/s11661-007-9412-2).10.1007/s11661-007-9412-2 ↗
38. N. Chawla, F. Ochoa, V.V. Ganesh, X. Deng, M. Koopman, K.K. Chawla, S. Scarritt: J. Mater. Sci.-Mater. Electron., 2004, vol. 15, pp. 385–8810.1023/B:JMSE.0000025683.19987.b3 ↗
39. G.L. Dirichlet: J. Reine Angew. Math., 1850, vol. 40, pp. 209–27
40. A. Ayyar, N. Chawla: Comp. Sci. Technol., 2006, vol. 66, pp. 1980–9410.1016/j.compscitech.2006.01.007 ↗
41. R.S. Sidhu, N. Chawla: Mater. Charact., 2004, vol. 52, pp. 225–3010.1016/j.matchar.2004.04.010 ↗
42. R.S. Sidhu, N. Chawla: Scripta Mater., 2006, vol. 54, pp. 1627–3110.1016/j.scriptamat.2006.01.013 ↗
43. W. Kurz, K. Fisher: Fundamentals of Solidification, Trans Tech Publications Ltd., NH, Zurich, Switzerland, 1998, pp. 34–42
44. D.B. Williams, C.B. Carter: Transmission Electron Microscopy: A Textbook for Materials Science, Plenum Press, New York, NY, 1996, p. 41710.1007/978-1-4757-2519-3 ↗
45. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, C.A. Handwerker: J. Electron. Mater., 2000, vol. 29, pp. 1122–3610.1007/s11664-000-0003-x ↗
46. I.E. Anderson, F.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, O. Unal: J. Electron. Mater., 2001, vol. 30, pp. 1050–5910.1007/s11664-001-0129-5 ↗
47. L. Snugovsky, P. Snugovsky, D.D. Perovic, T. Sack, J.W. Rutter: Mater. Sci. Technol., 2005, vol. 21, pp. 54–60
48. F. Ochoa, J.J. Williams, N. Chawla: JOM, 2003, vol. 55, pp. 56–6010.1007/s11837-003-0142-7 ↗
49. K.K. Chawla: Phil. Mag., 1973, vol. 28, pp. 401–1310.1080/14786437308217462 ↗
50. K.K. Chawla, M. Metzger: J. Mater Sci., 1972, vol. 7, pp. 34–3910.1007/BF00549547 ↗
51. M.C. Flemings: Metall. Trans., 1974, vol. 5, pp. 2121–3410.1007/BF02643923 ↗
52. K.H.W. Seah, J. Hemanth, S.C. Sharma: J. Mater. Sci., 1998, vol. 33, pp. 23–2810.1023/A:1004321007806 ↗
53. Q.C. Wang, C.H. Caceres: Mater. Sci. Eng. A, 1997, vol. 234, pp. 106–0910.1016/S0921-5093(97)00207-4 ↗
54. W.R. Osorio, A. Garcia: Mater. Sci. Eng. A, 2002, vol. 325, pp. 103–1110.1016/S0921-5093(01)01455-1 ↗
55. L. Snugovsky, P. Snugovsky, D.D. Perovic, J.W. Rutter: Mater. Sci. Technol., 2005, vol. 21, pp. 61–6810.1179/174328405X14047 ↗
56. N.R. Bonda, I.C. Noyan: IEEE Trans. Comp., Packag., Manufac. Technol. A, 1996, vol. 19, pp. 208–1210.1109/95.506106 ↗
57. D.R. Frear: Mechanics of Solder Alloy Interconnects, Van Nostran, New York, NY, 1994
58. R.S. Sidhu, S.V. Madge, X. Deng, and N. Chawla: J. Elec. Mater., 2007, vol. 36, pp. 1615–2010.1007/s11664-007-0239-9 ↗
59. H.Y. Lu, H. Balkan, K.Y.S. Ng: Microelectron. Rel., 2005, vol. 46, pp. 1058–7010.1016/j.microrel.2005.08.004 ↗
60. X. Deng, R.S. Sidhu, P. Johnson, N. Chawla: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 55–6410.1007/s11661-005-0138-8 ↗
61. D. Ma, W.D. Wang, S.K. Lahiri: J. Appl. Phys., 2002, vol. 91, pp. 3312–1710.1063/1.1445283 ↗
62. W.W. Mullins: J. Appl. Phys., 1957, vol. 28, pp. 333–3910.1063/1.1722742 ↗
63. K.J. Puttlitz, K.A. Stalter: Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, Marcel Dekker Inc., New York, NY, 2004, pp. 547–4810.1201/9780203021484 ↗
64. H.K. Kim, K.N. Tu: Appl. Phys. Lett., 1995, vol. 67, pp. 2002–0410.1063/1.114767 ↗
65. A.R. Fix, G.A. Lopez, I. Brauer, W. Nuchter, E.J. Mittemeijer: J. Electron. Mater., 2005, vol. 34, pp. 137–4210.1007/s11664-005-0224-0 ↗