journal article·2005-05

Three-dimensional analysis and classification of grain-boundary-nucleated proeutectoid ferrite precipitates

M. V. Kral, G. Spanos

Publisher page

Abstract

The three-dimensional (3-D) shapes and distributions of grain-boundary-nucleated proeutectoid ferrite precipitates have been obtained by computer-aided 3-D reconstruction of serial sections of an Fe-0.12 wt pct C-3.28 wt pct Ni alloy. Isothermal transformation for short times at 650 °C was used to produce a low volume fraction of ferrite, which appeared as both Widmanstatten shapes and more-equiaxed grain-boundary precipitates. While the two-dimensional (2-D) cross sections of these precipitates appeared to fit into the previously accepted categories of precipitate morphologies, 3-D reconstructions revealed important aspects of connectivity and shape that were not observed earlier. A partially revised morphological classification based on these 3-D observations is provided here. Significant differences between the 3-D morphology of proeutectoid ferrite and that of proeutectoid cementite are also discussed, indicating (among other things) that the 3-D morphological classifications of ferrite are generally more complex than those of proeutectoid cementite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. T.W. Eagar: Welding J., 1991, vol. 6, pp. 69–72.
2. G. Spanos, D.W. Moon, R.W. Fonda, E.S.K. Menon, and A.G. Fox: Metall. Mater. Trans. A, 2001, vol. 32, pp. 3043–54.10.1007/s11661-001-0179-6 ↗
3. D.W. Moon, R.W. Fonda, and G. Spanos: Welding J., 2000, vol. 79, pp. 278S-285S.
4. H.I. Aaronson: Mater. Forum, 1999, vol. 23, pp. 1–22.
5. S.G.E. te Velthuis, N.H. van Dijk, M.T. Rekveldt, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng., 2000, vol. 277 (1–2) pp. 218–28.10.1016/S0921-5093(99)00531-6 ↗
6. R.D. Townsend and J.S. Kirkaldy: Trans. ASM, 1968, vol. 61, pp. 605–19.
7. G. Spanos and M.G. Hall: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1519–34.10.1007/BF02649812 ↗
8. R.F. Mehl, C.S. Barrett, and D.W. Smith: Trans. AIME, 1933, vol. 105, pp. 215–58.
9. C.A. Dubé, H.I. Aaronson, and R.F. Mehl: Rev. Metall., 1958, vol. 55 (3), pp. 201–10.10.1051/metal/195855030201 ↗
10. The Decomposition of Austenite by Diffusional Processes, H.I. Aaronson, ed., Interscience, New York, NY, 1962.
11. J.R. Bradley, J.M. Rigsbee, and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 323–33.10.1007/BF02661647 ↗
12. E. Eichen, H.I. Aaronson, G.M. Pound, and R. Trivedi: Acta. Metall., 1964, vol. 12, pp. 1298–1301.10.1016/0001-6160(64)90116-6 ↗
13. S.J. Jones and H.K.D.H. Bhadeshia: Acta. Mater., 1997, vol. 45 (7), pp. 2911–20.10.1016/S1359-6454(96)00392-8 ↗
14. E.P. Simonen, H.I. Aaronson, and R. Trivedi: Metall. Trans., 1973, vol. 4, pp. 1239–45.10.1007/BF02644517 ↗
15. G.P. Krielaart, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng., 1997, vol. A237 (2), pp. 216–23.10.1016/S0921-5093(97)00365-1 ↗
16. G.R. Purdy: Scripta Metall., 1987, vol. 21 (8), pp. 1035–38.10.1016/0036-9748(87)90245-6 ↗
17. M. Hillert: Jernkont Ann, 1957, vol. 141, pp. 757–89.
18. C.A. Dubé: Ph.D. Dissertation, Carnegie-Mellon University, Pittsburgh, PA, 1948.
19. H.I. Aaronson and C. Wells: Trans. AIME, 1956, vol. 206, pp. 1216–23.
20. G.R. Purdy: Acta, Metall., 1978, vol. 26, pp. 477–86.10.1016/0001-6160(78)90173-6 ↗
21. W.T. Reynolds, F.Z. Li, C.K. Shui, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–63.10.1007/BF02672561 ↗
22. M.V. Kral and G. Spanos: Scripta Mater., 1997, vol. 36 (8), pp. 875–82.10.1016/S1359-6462(96)00498-8 ↗
23. M.V. Kral and G. Spanos: Acta. Metall., 1999, vol. 47 (2), pp. 711–24.
24. R.W. Heckel and H.W. Paxton: Trans. ASM, 1961, vol. 53, pp. 539–54.
25. R.E. Hackenberg, D.P. Nordstrom, and G.J. Shiflet: Scripta Mater., 2002, vol. 47 (6), pp. 357–61.10.1016/S1359-6462(02)00167-7 ↗
26. K.M. Wu and M. Enomoto: Scripta Mater., 2002, vol. 46 (8), pp. 569–74.10.1016/S1359-6462(02)00014-3 ↗
27. T. Yokomizo, M. Enomoto, O. Umezawa, G. Spanos, and R.O. Rosenberg: Mater. Sci. Eng., 2003, vol. 344 (1–2), pp. 261–67.10.1016/S0921-5093(02)00411-2 ↗
28. G. Spanos and M.V. Kral: Int. Conf. on Solid-Solid Phase Transformations ’99, M. Koiwa, K. Otsuka, and T. Miyazaki, eds., Japan Institute of Metals, Kyoto, Japan, 1999, pp. 1469–72.
29. P.G. Boswell, K.R. Kinsman, G.J. Shiflet, and H.I. Aaronson: Mechanical Properties and Phase Transformations in Engineering Materials—Earl R. Parker Symp. on Structure Property Relationships, New Orleans, LA, 1986, S.D. Antolovich, R.O. Richie, and W.W. Gerberich, eds., TMS-AIME, Warrendale, PA, pp. 445–66.
30. W.T. Reynolds, S.K. Liu, F.Z. Li, S. Hartfield, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1479–91.10.1007/BF02672563 ↗
31. M.V. Kral, G.E. Ice, M.K. Miller, M.D. Uchic, and R.O. Rosenberg: in ASM International Metallography and Microstructures Handbook, G.F. VanderVoort, ed., ASM INTERNATIONAL, Materials Park, OH, 2004.
32. M. Lanzagorta, M.V. Kral, J.E. Swan, G. Spanos, R.O. Rosenberg, and E. Kuo: in IEEE Visualization ’98, IEEE Computer Society Press, Research Triangle Park, NC, 1998, pp. 487–90.
33. A.W. Wilson and G. Spanos: Mater. Characterization, 2001, vol. 46 (5), pp. 407–18.10.1016/S1044-5803(01)00140-1 ↗
34. G. Spanos, A.W. Wilson, and M.V. Kral: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1209–18.10.1007/s11661-005-0213-1 ↗
35. C.Y. Hung, G. Spanos, R.O. Rosenberg, and M.V. Kral: Acta, Mater., 2002, vol. 50 (15), pp. 3781–88.10.1016/S1359-6454(02)00170-2 ↗
36. U. Dahmen: Acta. Met., 1982, vol. 30 (1), pp. 63–73.10.1016/0001-6160(82)90045-1 ↗
37. G. Spanos and H.I. Aaronson: Acta Metall., 1990, vol. 38 (12), pp. 2721–32.10.1016/0956-7151(90)90286-P ↗
38. J.M. Howe and G. Spanos: Phil. Magn., 1999, vol. 79 (1), pp. 9–30.10.1080/014186199252813 ↗
39. S.A. Hackney and G.J. Shiflet: Acta Metall., 1987, vol. 35 (5), pp. 1007–17.10.1016/0001-6160(87)90048-4 ↗
40. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27 (3), pp. 365–76.10.1016/0001-6160(79)90029-4 ↗
41. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27 (3), pp. 351–63.10.1016/0001-6160(79)90028-2 ↗