Static Strain Aging of Microstructural Constituents in Transformation-Induced-Plasticity Steel
Source abstract
Abstract
A pronounced difference in static strain aging was observed between unstrained and prestrained low-alloy multiphase transformation-induced-plasticity (TRIP) steel. High bake-hardening (BH) values were obtained for prestrained TRIP steel. This aging behavior was shown to be directly related to the multiphase microstructure, by analyzing static strain aging in the ferrite and bainite separately. The ferrite in TRIP steel exhibits very limited strain aging, due to the Cottrell atmosphere formation. The bainite constituent, which contains retained austenite, has a pronounced static strain-aging response in the 2 pct prestrained condition. This is a result of internal stresses generated by the strain-induced martensite and the low-temperature aging of this phase. In the absence of strain-induced martensite, the BH values of TRIP steel are low and are due only to the Cottrell atmosphere formation. The TRIP steel exhibits an intermediate BH response, due to the composite effect of its ferrite and bainite constituents. The influence of the cross-sectional changes and volume changes during tensile tests carried out to determine the BH values is also reviewed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. H.E. Rosinger: Met. Sci., 1975, vol. 9, pp. 1–710.1016/0036-9748(75)90135-0 ↗
2. D.V. Wilson, B. Russell, and J.D. Eshelby: Acta Metall., 1959, vol. 7, pp. 628–3110.1016/0001-6160(59)90132-4 ↗
3. Y. Nakada, and A.S. Keh: Acta Metall., 1967, vol. 15 (5), pp. 879–8310.1016/0001-6160(67)90370-7 ↗
4. A.H. Cottrell, and B.A. Bilby: Proc. Phys. Soc., 1949, vol. A62, pp. 49–6210.1088/0370-1298/62/1/308 ↗
5. V.T.L. Buono, M.S. Andrade, and B.M. Gonzalez: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1415–2310.1007/s11661-998-0356-y ↗
6. E. Kozeschnik, and B. Buchmayr: Steel Res., 1997, vol. 68 (5), pp. 224–3010.1002/srin.199701783 ↗
7. T. Waterschoot, A.K. De, S. Vandeputte, and B.C. De Cooman: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 781–9110.1007/s11661-003-0113-1 ↗
8. T. Waterschoot, B.C. De Cooman, S. Vandeputte, and K. Conlon: Z. Metallkd., 2003, vol. 94 (4), pp. 424–3510.3139/146.030424 ↗
9. A.K. De, T. Waterschoot, and B.C. De Cooman: Z. Metallkd., 2003, vol. 94 (4), pp. 436–4110.3139/146.030436 ↗
10. T. Waterschoot: Doctoral Thesis, University of Ghent, Ghent, Belgium, 2003
11. EN-10325:2002, Bake-Hardening Index, 2002
12. T.B. Hilditch, J.G. Speer, and D.K. Matlock: Steel Grips, 2004, vol. 3, pp. 209–11
13. L. Samek, E. De Moor, J. Penning, and B.C. De Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–2410.1007/s11661-006-0157-0 ↗
14. A. Jablonka, K. Harste, and K. Schwerdtfeger: Steel Res., 1991, vol. 62 (1), pp. 24–3310.1002/srin.199101722 ↗
15. L. Barbé, L. Samek, K. Verbeken, K. Conlon, and B.C. De Cooman: Int. J. Mater. Res., 2005, vol. 97 (8), pp. 1123–2910.1515/ijmr-2006-0177 ↗
16. K.R. Kinsman, E. Eichen, and H.I. Aaronson: Metall. Trans., 1971, vol. 2, pp. 346–4810.1007/BF02662694 ↗
17. W.T. Reynolds, S.S. Brenner, and H.I. Aaronson: Scripta Metall., 1988, vol. 22 (8), pp. 1343–4810.1016/S0036-9748(88)80159-5 ↗
18. H.K.D.H. Bhadeshia, and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–90710.1007/BF02658309 ↗
19. R.F. Hehemann: Phase Transformation, ASM, Metals Park, OH, 1970, pp. 397–432
20. M.X. Zhang, and P.M. Kelly: Mater. Charact., 1998, vol. 40 (3), pp. 159–6810.1016/S1044-5803(98)00005-9 ↗
21. B. Sundman, B. Jansson, and J.O. Anderson: CALPHAD, 1985, vol. 9, pp. 153–9010.1016/0364-5916(85)90021-5 ↗
22. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. Vanderzwaag, J.H. Root, and N.B. Konyer: Scripta Metall. Mater., 1993, vol. 29 (8), pp. 1011–1610.1016/0956-716X(93)90169-S ↗
23. R.D.K. Misra, S.W. Thompson, T.A. Hylton, and A.J. Boucek: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 745–6010.1007/s11661-001-1009-6 ↗
24. M.S. Rashid: in Formable HSLA and Dual-Phase Steels, A.D. Davenport, ed., TMS-AIME, Warrendale, PA, 1977, pp. 1–24
25. E. Vasseur, H. Tsikahara, J. Drillet, E. Pinto Da Costa, and S. Ribau: 41st MWSP Conf. Proc., ISS, Baltimore, MD, 1999, pp. 811–17
26. C. Mesplont: Doctoral Thesis, University of Ghent, Ghent, Belgium, 2002
27. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39 (8), pp. 813–2210.2355/isijinternational.39.813 ↗
28. M. De Meyer: Iron Steelmaker, 2000, vol. 27 (2), pp. 55–63
29. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden, and J. Van Humbeeck: Scripta Mater., 2001, vol. 44 (6), pp. 885–9210.1016/S1359-6462(00)00697-7 ↗
30. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: in Proc. Int. Symp. Transformation and Deformation Mechanisms in Advanced High-Strength Steels, M. Militzer, W.J. Poole, and E. Essadiqi, eds., Vancouver, BC, 2003, pp. 77–91
31. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: Steel Res. Int., 2004, vol. 75 (11), pp. 716–2310.1002/srin.200405833 ↗
32. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: 6th Mesomechanics, G.C. Sih, T.B. Kermanidis, S.G. Pantelakis, eds., University of Patras, Patras, Greece, 2004, pp. 120–28
33. A.K. De, R.S. Kircher, J.G. Speer, and D. Matlock: in Int. Conf. on Advanced High Strength Sheet Steels for Automotive Application Proc., R.E. Ashburn and M.A. Baker, eds., Winter Park, CO, 2004, pp. 337–47
34. P. Jacques, Q. Furnemont, T. Pardoen, and F. Delannay: Acta Mater., 2001, vol. 49 (1), pp. 139–5210.1016/S1359-6454(00)00215-9 ↗
35. E.O. Hall: Yield Point Phenomena in Metals and Alloys, Plenum Press, New York, NY, 197010.1007/978-1-4684-1860-6 ↗
36. G.T. Hahn: Acta Metall., 1962, vol. 10 (8), pp. 727–3810.1016/0001-6160(62)90041-X ↗
37. W. Sylwestrowicz, and E.O. Hall: Proc. Phys. Soc., Sec. B, vol. 64 (6), 1951, p. 49510.1088/0370-1301/64/6/305 ↗
38. H. Conrad: J. Mech. Phys. Solids, 1963, vol. 11, pp. 437–4010.1016/0022-5096(63)90020-6 ↗
39. H.S. Moon, L. Anand, and S.M. Spearing: Mater. Res. Soc. Symp. Proc., 2002, vol. B9.6, pp. 687–92
40. M. Zaiser: Acta Mater., 1997, vol. 45 (4), pp. 1695–170410.1016/S1359-6454(96)00278-9 ↗
41. Y. Estrin, and L.P. Kubin: Mater. Sci. Eng., A, 1991, vol. 137, pp. 125–3410.1016/0921-5093(91)90326-I ↗
42. H. Neuhauser: Int. J. Plast., 1993, vol. 9 (4), pp. 421–3510.1016/0749-6419(93)90046-S ↗
43. Z.Y. He: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 731–3610.1007/BF02648960 ↗
44. M. Zaiser, and P. Hahner: Phys. Status Solidi B, 1997, vol. 199 (2), pp. 267–33010.1002/1521-3951(199702)199:2<267::AID-PSSB267>3.0.CO;2-Q ↗
45. G. Ferron: Mater. Sci. Eng., A, 1981, vol. 49 (3), pp. 241–4810.1016/0025-5416(81)90118-X ↗
46. Y.H. Kim, and R.H. Wagoner: Int. J. Mech. Sci., 1987, vol. 29 (3), pp. 179–9410.1016/0020-7403(87)90051-8 ↗
47. A. Marchand, and J. Duffy: J. Mech. Phys. Solids, 1988, vol. 36 (3), pp. 251–8310.1016/0022-5096(88)90012-9 ↗
48. A. Chrysochoos and H. Louche: Int. J. Eng. Sci., 20000, vol. 38 (16), pp. 1759–8810.1016/S0020-7225(00)00002-1 ↗
49. H. Louche, and A. Chrysochoos: Mater. Sci. Eng., A, 2001, vol. 307 (1–2), pp. 15–2210.1016/S0921-5093(00)01975-4 ↗
50. S. Traint, A. Pichler, K. Hauzenberger, P. Stiaszny, and E. Werner: Proc. Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschaftsverlag Mainz Gmbh, Ghent, Belgium, 2002, pp. 121–28
51. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: in Int. Conf. on Advanced High Strength Sheet Steels for Automotive Appl. Proc., R.E. Ashburn and M.A. Baker, eds., Winter Park, CO, 2004, pp. 361–74
52. R.W.K. Honeycombe, and H.K.D.H. Bhadeshia: Steels: Microstructure and Properties, Edward Arnold, London, 1995
53. K.J. Irvine, D.T. Llewellyn, and F.B. Pickering: J. Iron Steel Inst., 1961, vol. 199, pp. 153–75
54. W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 5–2610.1007/BF02680580 ↗
55. H. Unckel: J. Inst. Met., 1937, vol. 61, p. 171
56. G.R. Speich, and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–5410.1007/BF02642436 ↗
57. G. Krauss: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 861–7710.1007/s11661-001-0344-y ↗
58. C. Garcia-Mateo, M. Peet, F.G. Caballero, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20 (7), pp. 814–1810.1179/026708304225017355 ↗
59. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Institute of Materials, London, 2001
60. Q. Furnemont, P. Jacques, T. Pardoen, F. Lani, S. Godet, P. Harlet, K. Conlon, and F. Delannay: Proc. Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschaftsverlag Mainz Gmbh, Ghent, Belgium, 2002, pp. 39–43
61. Q. Furnemont: Doctoral Thesis, University of Ghent, Louvain-la-Neuve, Belgium, 2003
62. J. Bouquerel, K. Verbeken, and B.C. De Cooman: Acta Mater., 2006, vol. 54 (6), pp. 1443–5610.1016/j.actamat.2005.10.059 ↗
63. A.K. De, S. Vandeputte, and B.C. De Cooman: Scripta Mater., 1999, vol. 41 (8), pp. 831–3710.1016/S1359-6462(99)00232-8 ↗
64. J.Z. Zhao, A.K. De, and B.C. De Cooman: Mater. Lett., 2000, vol. 44 (6), pp. 374–7810.1016/S0167-577X(00)00062-8 ↗
65. B. Soenen, A.K. De, S. Vandeputte, and B.C. De Cooman: Acta Mater., 2004, vol. 52 (12), pp. 3483–9210.1016/j.actamat.2004.03.046 ↗
66. M. De Meyer, D. Vanderschueren, K. De Blauwe, and B. De Cooman: 41st MWSP Conf. Proc., ISS, Baltimore, MD, 1999, pp. 483–91
67. L. Barbé, K. Conlon, and B.C. De Cooman: Z. Metallkd., 2002, vol. 93 (12), pp. 1217–2710.3139/146.021217 ↗
68. F.E. Fujita: Metall. Mater. Trans. A, 1977, vol. 8A, pp. 1727–3610.1007/BF02646876 ↗
69. M. Milititsky, B.C. De Cooman, J.G. Speer, N. De Wispelaere, and N. Akdut: Metall. Mater. Trans. A, 2006, vol. 37A (7), pp. 2117–2310.1007/BF02586132 ↗
70. K.S.B. Rose, and S.G. Gloverj: Acta Metall., 1966, vol. 14 (11), pp. 1505–1610.1016/0001-6160(66)90172-6 ↗
71. C. Godoy, E. Silva: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2271–7710.1007/s11661-001-0202-y ↗
72. S.P. Hannula, M.A. Korhonen, and C.Y. Li: Metall. Trans. A, 1986, vol. 17A, pp. 1757–6710.1007/BF02817274 ↗
73. S. Ankem, and H. Margolin: Metall. Trans. A, 1982, vol. 13A, pp. 595–60110.1007/BF02644424 ↗
74. S. Ankem, and H. Margolin: Metall. Trans. A, 1982, vol. 13A, pp. 603–0910.1007/BF02644425 ↗
75. T. Gladman, I.D. McIvor, and F.B. Pickering: J. Iron Steel Inst., 1972, vol. 210 (12), pp. 916–30
76. N.C. Goel, S. Sangal, and K. Tangri: Metall. Trans. A, 1985, vol. 16A, pp. 2013–2110.1007/BF02662402 ↗
77. Y.L. Su, and J. Gurland: Mater. Sci. Eng., A, 1987, vol. 95, pp. 151–6510.1016/0025-5416(87)90507-6 ↗
78. Y. Tomota, K. Kuroki, T. Mori, and I. Tamura: Mater. Sci. Eng., 1976, vol. 24 (1), pp. 85–9410.1016/0025-5416(76)90097-5 ↗
79. L.M. Clarebrough: Proc. R. Soc. London, Ser. A, 1950, vol. 257, p. 326
80. S. Ankem, and H. Margolin: Metall. Trans. A, 1986, vol. 17A, pp. 2209–2610.1007/BF02645919 ↗
81. S. Ankem, and H. Margolin: J. Met., 1986, vol. 38 (4), pp. 25–29
82. S. Sangal, N.C. Goel, and K. Tangri: Metall. Trans. A, 1985, vol. 16A, pp. 2023–2910.1007/BF02662403 ↗
83. K. Cho, and J. Gurland: Metall. Trans. A, 1988, vol. 19A, pp. 2027–4010.1007/BF02645206 ↗
84. A. Perlade, O. Bouaziz, and Q. Furnemont: Mater. Sci. Eng., A, 2003, vol. 356 (1–2), pp. 145–5210.1016/S0921-5093(03)00121-7 ↗
85. O. Bouaziz, and P. Buessler: Rev. Metall., 2002, vol. 99 (1), pp. 71–7710.1051/metal:2002182 ↗
86. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 671–7910.1007/BF02659924 ↗
87. G. Thomas and J.Y. Koo: in Proc. AIME Symp., J.W. Morris and R. Kot, eds., New Orleans, LA, 1979, p. 183
88. I. Tamura, Y. Tomota, and M. Ozawa: Proc. 3rd Int. Conf. on Strength of Metals and Alloys, Cambridge, United Kingdom, 1973, pp. 611–15
89. H. Mecking, and U.F. Kocks: Acta Metall., 1981, vol. 29 (11), pp. 1865–7510.1016/0001-6160(81)90112-7 ↗
90. J. Gurland: Mater. Sci. Eng., 1979, vol. 40 (1), pp. 59–7110.1016/0025-5416(79)90008-9 ↗
91. J. Gurland: Scripta Metall., 1979, vol. 13 (10), pp. 967–6910.1016/0036-9748(79)90330-2 ↗
92. Q. Furnemont, S. Godet, and P. Jacques: in Proc. Int. Symp. on Transformation and Deformation Mechanisms in Advanced High-Strength Steels, M. Militzer, W.J. Poole, and E. Essadiqi, eds., Vancouver, BC, 2003, pp. 221–21
93. Q. Furnemont, G. Lacroix, S. Godet, K.T. Conlon, and P.J. Jacques: Can. Metall. Q., 2004, vol. 43 (1), pp. 35–4210.1179/cmq.2004.43.1.35 ↗