journal article·2013-01Open access

Effects of Cooling Conditions on Microstructure, Tensile Properties, and Charpy Impact Toughness of Low-Carbon High-Strength Bainitic Steels

Hyo Kyung Sung, Sang Yong Shin, Byoungchul Hwang, Chang Gil Lee, Sunghak Lee

Abstract

In this study, four low-carbon high-strength bainitic steel specimens were fabricated by varying finish cooling temperatures and cooling rates, and their tensile and Charpy impact properties were investigated. All the bainitic steel specimens consisted of acicular ferrite, granular bainite, bainitic ferrite, and martensite-austenite constituents. The specimens fabricated with higher finish cooling temperature had a lower volume fraction of martensite-austenite constituent than the specimens fabricated with lower finish cooling temperature. The fast-cooled specimens had twice the volume fraction of bainitic ferrite and consequently higher yield and tensile strengths than the slow-cooled specimens. The energy transition temperature tended to increase with increasing effective grain size or with increasing volume fraction of granular bainite. The fast-cooled specimen fabricated with high finish cooling temperature and fast cooling rate showed the lowest energy transition temperature among the four specimens because of the lowest content of coarse granular bainite. These findings indicated that Charpy impact properties as well as strength could be improved by suppressing the formation of granular bainite, despite the presence of some hard microstructural constituents such as bainitic ferrite and martensite-austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. R. Denys: Pipeline Technology Conference, vols. I & II, Elsevier, Amsterdam, Netherlands, 2000, pp. 1–116.
2. T. Araki: Atlas for Bainitic Microstructures, ISIJ, Tokyo, Japan, 1992, pp. 1–100.
3. J.Y. Koo, M.J. Luton, N.V. Bangaru, R.A. Petkovic, D.P. Fairchild, C.W. Petersen, H. Asahi, T. Hara, Y. Terada, M. Sugiyama, H. Tamehiro, Y. Komizo, S. Okaguchi, M. Hamada, A. Yamamoto, and I. Takeuchi: Proceedings of 13th International Offshore and Polar Engineering Conference, Honolulu, Hawaii, 2003, pp. 10–18.
4. J.E. Hood: Int. J. Pres. Ves. Piping, 1974, vol. 2, pp. 165–78.10.1016/0308-0161(74)90001-5 ↗
5. T. Hara, Y. Shinohara, Y. Terada, H. Asahi, and N. Doi: Proceedings of 19th International Offshore and Polar Engineering Conference, Osaka, Japan, 2009, pp. 73–79.
6. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-alloy Steels, Butterworth & Co., Ltd., London, U.K., 1988, pp. 80–100.10.1016/B978-0-408-11034-1.50007-6 ↗
7. H.K.D.H. Bhadeshia: Mater. Sci. Eng., 2004, vol. A378, pp. 34–39.10.1016/j.msea.2003.10.328 ↗
8. Y. Kim, J. Lee, J. Park, and S.-H. Jeon: Met. Mater. Int., 2011, vol. 17, pp. 607–11.10.1007/s12540-011-0812-x ↗
9. G. Huang and K.M. Wu: Met. Mater. Int., 2011, vol. 17, pp. 847–52.10.1007/s12540-011-1024-0 ↗
10. H. Ohtani, S. Okaguchi, Y. Fujishiro, and Y. Ohmori: Metall. Trans. A, 1990, vol. 21A, pp. 877–88.10.1007/BF02656571 ↗
11. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
12. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
13. M. Honjo and Y. Saito: ISIJ Int., 2000, vol. 40, pp. 914–19.10.2355/isijinternational.40.914 ↗
14. J.B. Seol, N.S. Lim, B.H. Lee, L. Renaud, and C.G. Park: Met. Mater. Int., 2011, vol. 17, pp. 413–16.10.1007/s12540-011-0617-y ↗
15. Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1731–42.10.1007/s11661-007-9197-3 ↗
16. S.K. Kim, Y.M. Kim, Y.J. Lim, and N.J. Kim: Proceedings of 15th Conference on Mechanical Behaviors of Materials, Seoul, Korea, 2001, pp. 177–86.
17. N.J. Kim, A.J. Yang, and G. Thomas: Metall. Trans. A, 1985, vol. 16A, pp. 471–74.10.1007/BF02814349 ↗
18. M. Diaz-Fuentes, A. Iza-Mendia, and I. Gutierrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2505–16.10.1007/s11661-003-0010-7 ↗
19. ASTM Standard E23-09: Standard Test Method for Notched Bar Impact Testing of Metallic Materials, Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2009.
20. W. Oldfield: Curve Fitting Impact Test Data—a Statistical Procedure, ASTM Standardization News, West Conshohocken, PA, 1975, pp. 24–29.
21. C. Garcia-Mateo, M. Peet, F.G. Caballero, and H.K.D.H. Bhadeshia: Mater. Sci. Tech., 2004, vol. 21, pp. 814–18.10.1179/026708304225017355 ↗
22. C.H. Lee, H.K.D.H. Bhadeshia, and H.-C. Lee: Mater. Sci. Eng., 2003, vol. A360, pp. 249–57.10.1016/S0921-5093(03)00477-5 ↗
23. K.-T. Park, S.W. Hwang, J.H. Ji, and C.H. Lee: Met. Mater. Int., 2011, vol. 17, pp. 349–56.10.1007/s12540-011-0425-4 ↗
24. F.S. LePera: Metallography, 1979, vol. 12, pp. 263–68.10.1016/0026-0800(79)90041-7 ↗
25. Y. Ohomori, H. Ohtani, and T. Kunitake: Met. Sci., 1974, vol. 8, pp. 357–66.10.1016/0036-9748(74)90138-0 ↗
26. H.-S. Yang, B.-S. Seong, S.-H. Han, and S.-H. Choi: Met. Mater. Int., 2011, vol. 17, pp. 403–12.10.1007/s12540-011-0616-z ↗
27. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 16A, pp. 1493–507.10.1007/BF02672564 ↗
28. Z. Tang and W. Strumpf: Mater. Charact., 2008, vol. 59, pp. 717–28.10.1016/j.matchar.2007.06.001 ↗
29. H.W. Swift: J. Mech. Phys. Solids, 1952, vol. 1, pp. 1–16.10.1016/0022-5096(52)90002-1 ↗
30. J.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268–90.
31. M. Toyoda and R. Deny: Proceedings of. International Pipe Dreamer’s Conference, Scientific Surveys, Ltd., Yokohama, Japan, 2002, pp. 1–441.
32. N. Okumura: Met. Sci., 1983, vol. 17, pp. 581–89.10.1179/030634583790420420 ↗
33. F.B. Pickering and T. Gladman: ISI Spec. Rep., 1961, vol. 81, pp. 10–20.