journal article·2010-04

Developing Processing Routes for the Equal-Channel Angular Pressing of Age-Hardenable Aluminum Alloys

Zhi Chao Duan, Nguyen Q. Chinh, Cheng Xu, Terence G. Langdon

Publisher page

Abstract

The processing of age-hardenable aluminum alloys by equal-channel angular pressing (ECAP) was investigated using three different Al-Zn-Mg alloys. The results show that it is relatively easy to conduct the ECAP at an elevated temperature of 473 K, but this leads to a weakening of the alloy rather than a strengthening. The processing by ECAP may be performed successfully at room temperature provided it is conducted fairly quickly (within ~10 minutes) after quenching from the solution treatment. It is necessary also to optimize the solution treatment conditions for each alloy composition. Under optimum conditions, good strengthening is achieved even after a single pass in ECAP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
2. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
3. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 691–701.10.1007/s11661-000-0011-8 ↗
4. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
5. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
6. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
7. S.D. Terhune, D.L. Swisher, K. Oh-ishi, Z. Horita, T.G. Langdon, and T.R. McNelley: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2173–84.10.1007/s11661-002-0049-x ↗
8. A.A. Salem, T.G. Langdon, T.R. McNelley, S.R. Kalidindi, and S.L. Semiatin: Metall. Mater. Trans. A, 1996, vol. 37A, pp. 2879–91.
9. J. Wang, Z. Horita, M. Furukawa, M. Nemoto, N.K. Tsenev, R.Z. Valiev, Y. Ma, and T.G. Langdon: J. Mater. Res., 1993, vol. 8, pp. 2810–18.10.1557/JMR.1993.2810 ↗
10. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, pp. 2973–82.10.1016/1359-6454(95)00395-9 ↗
11. M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, pp. 4619–29.10.1016/1359-6454(96)00105-X ↗
12. J. Wang, M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Mater. Sci. Eng., 1996, vol. A216, pp. 41–46.10.1016/0921-5093(96)10390-7 ↗
13. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2503–10.10.1007/s11661-998-0222-y ↗
14. D.G. Morris and M.A. Muñoz-Morris: Acta Mater., 2002, vol. 50, pp. 4047–60.10.1016/S1359-6454(02)00203-3 ↗
15. C. Xu, W. Dixon, M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Lett., 2003, vol. 57, pp. 3588–92.10.1016/S0167-577X(03)00130-7 ↗
16. C. Xu, M. Furukawa, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 6139–49.10.1016/S1359-6454(03)00433-6 ↗
17. M.J. Starink, N. Gao, M. Furukawa, Z. Horita, C. Xu, and T.G. Langdon: Rev. Adv. Mater. Sci., 2004, vol. 7, pp. 1–12.
18. C. Xu, M. Furukawa, Z. Horita, and T.G. Langdon: Acta Mater., 2005, vol. 53, pp. 749–58.10.1016/j.actamat.2004.10.026 ↗
19. N. Gao, M.J. Starink, M. Furukawa, Z. Horita, C. Xu, and T.G. Langdon: Mater. Sci. Eng., 2005, vols. A410–A411, pp. 303–07.10.1016/j.msea.2005.08.075 ↗
20. S.C. Wang, M.J. Starink, N. Gao, C. Xu, and T.G. Langdon: Rev. Adv. Mater. Sci., 2005, vol. 10, pp. 249–55.
21. S.G. Chowdhury, C. Xu, and T.G. Langdon: Mater. Sci. Eng., 2008, vol. A473, pp. 219–25.10.1016/j.msea.2007.05.052 ↗
22. C. Xu, Z. Száraz, Z. Trojanová, P. Lukáč, and T.G. Langdon: Mater. Sci. Eng., 2008, vol. A497, pp. 206–11.10.1016/j.msea.2008.06.045 ↗
23. L.J. Zheng, C.Q. Chen, T.T. Zhou, P.Y. Liu, and M.G. Zeng: Mater. Charact., 2003, vol. 49, pp. 455–61.10.1016/S1044-5803(03)00069-X ↗
24. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52, pp. 4589–99.10.1016/j.actamat.2004.06.017 ↗
25. G. Sha, Y.B. Wang, X.Z. Liao, Z.C. Duan, S.P. Ringer, and T.G. Langdon: Acta Mater., 2009, vol. 57, pp. 3123–32.10.1016/j.actamat.2009.03.017 ↗
26. R.B. Figueiredo, Z. Duan, M. Kawasaki, and T.G. Langdon: Mater. Sci. Forum, 2010, vols. 633–634, pp. 341–52.
27. J. Gubicza, I. Schiller, N.Q. Chinh, J. Illy, Z. Hegedüs, and T.G. Langdon: Mater. Sci. Eng., 2007, vols. A460–A461, pp. 77–85.10.1016/j.msea.2007.01.001 ↗
28. N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, Z. Horita, C. Xu, and T.G. Langdon: Mater. Sci. Forum, 2008, vols. 584–586, pp. 501–06.10.4028/www.scientific.net/MSF.584-586.501 ↗
29. N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, C. Xu, R.Z. Valiev, and T.G. Langdon: Mater. Sci. Eng., 2009, vol. A516, pp. 248–52.10.1016/j.msea.2009.03.049 ↗
30. C.Y. Nam, J.H. Han, Y.H. Chung, and M.C. Shin: Mater. Sci. Eng., 2003, vol. A347, pp. 253–57.10.1016/S0921-5093(02)00597-X ↗
31. D.P. DeLo and S.L. Semiatin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1391–1402.10.1007/s11661-999-0287-2 ↗
32. S.L. Semiatin, V.M. Segal, R.F. Goforth, N.D. Frey, and D.P. DeLo: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1425–35.10.1007/s11661-999-0290-7 ↗
33. S.L. Semiatin and D.P. DeLo: Mater. Design, 2000, vol. 21, pp. 311–22.10.1016/S0261-3069(99)00085-0 ↗
34. K. Xia, J.T. Wang, X. Wu, G. Chen, and M. Gurvan: Mater. Sci. Eng., 2005, vols. 410–411, pp. 324–27.10.1016/j.msea.2005.08.123 ↗
35. A. Yamashita, D. Yamaguchi, Z. Horita, and T.G. Langdon: Mater. Sci. Eng., 2000, vol. A287, pp. 100–06.10.1016/S0921-5093(00)00836-4 ↗
36. D. Yamaguchi, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1999, vol. 41, pp. 791–96.10.1016/S1359-6462(99)00233-X ↗
37. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 36, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
38. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 1998, vol. A257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
39. T.G. Langdon: Mater. Sci. Eng., 2007, vol. A462, pp. 3–11.10.1016/j.msea.2006.02.473 ↗
40. N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, and T.G. Langdon: Mater. Sci. Forum, 2010, vols. 633–634, pp. 527–34.
41. M. Kawasaki, Z. Horita, and T.G. Langdon: Mater. Sci. Eng., 2009, vol. A524, pp. 143–50.10.1016/j.msea.2009.06.032 ↗
42. N.Q. Chinh, P. Szommer, Z. Horita, and T.G. Langdon: Adv. Mater., 2006, vol. 18, pp. 34–39.10.1002/adma.200501232 ↗
43. L.F. Mondolfo, N.A. Gjostein, and D.W. Levinson: Trans. Am. Inst. Min (Metall.) Eng., 1956, vol. 206, pp. 1378–85.
44. G. Thomas and J. Nutting: J. Inst. Met., 1959–1960, vol. 88, pp. 81–90.10.1115/1.4008370 ↗
45. J.D. Embury and R.B. Nicholson: Acta Metall., 1965, vol. 13, pp. 403–17.10.1016/0001-6160(65)90067-2 ↗
46. L.F. Mondolfo: Int. Metall. Rev., 1971, vol. 153, pp. 95–124.10.1179/095066071790137865 ↗
47. H. Löffler, I. Kovács, and J. Lendvai: J. Mater. Sci., 1983, vol. 18, pp. 2215–40.10.1007/BF00541825 ↗
48. I.J. Polmear: Light Alloys, 3rd ed., Butterworth-Heinemann, London, 1995.
49. K. Venkateswarlu, M. Ghosh, A.K. Ray, C. Xu, and T.G. Langdon: Mater. Sci. Eng. A, 2008, vol. 485, pp. 476–80.10.1016/j.msea.2007.08.007 ↗
50. J.H. Han, H.K. Seok, Y.H. Chung, M.C. Shin, and J.C. Lee: Mater. Sci. Eng. A, 2002, vol. 323, pp. 342–47.10.1016/S0921-5093(01)01389-2 ↗
51. Y. Huang and P.B. Prangnell: Scripta Mater., 2007, vol. 56, pp. 333–36.10.1016/j.scriptamat.2006.11.011 ↗
52. Z.H. Chen, Y.Q. Cheng, and W.J. Xia: Mater. Manufact. Process., 2007, vol. 22, pp. 51–56.10.1080/10426910601015907 ↗