An Investigation on Hot Tearing of Mg-4.5Zn-(0.5Zr) Alloys with Y Additions
Source abstract
Abstract
In this work, the hot tearing susceptibility (HTS) of Mg-4.5Zn-xY (x = 0, 0.4, 0.9, 2 wt pct) alloys is investigated using constrained rod casting apparatus equipped with a load cell and data acquisition system. The effect of grain refinement by Zr addition on the HTS has also been investigated. The results show that the HTS first increases with increasing the Y content, reaches the maximum at 0.9 wt pct Y, and then reduces with further increase in the Y content to 2.0 wt pct. The high HTS observed in the alloys with 0.4 and 0.9 wt pct Y is attributed to their coarse columnar grains and their large freezing ranges. The results also suggest that the resistance to the hot tearing can apparently be improved by increasing the initial mold temperature. In addition, a fine microstructure reduces the HTS. Numerical simulations using ProCAST software on HTS of Mg-4.5Zn-xY alloys are in good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. D. Warrington, D. G. McCartney: Cast Metal., 1989, vol. 2, pp. 134-43.10.1080/09534962.1989.11818994 ↗
2. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629-711.10.1016/S0079-6425(03)00037-9 ↗
3. G. Cao, S. Kou: Mater. Sci. Eng. A, 2006, vol. 417, pp. 230-38.10.1016/j.msea.2005.10.050 ↗
4. G. Cao, C. Zhang, H. Cao, Y. A. Chang, S. Kou: Metall. Mater. Trans. A, 2010, vol, 41, pp. 706-16.10.1007/s11661-009-0134-5 ↗
5. G. Cao, S. Kou: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3647-63.10.1007/s11661-006-1059-x ↗
6. L. Zhou, Y.D. Huang, P.L. Mao, K.U. Kainer, Z. Liu, and N. Hort: Magnesium Technology 2011, TMS, 2011, pp. 125–30.10.1002/9781118062029.ch24 ↗
7. L. Zhou, Y.D. Huang, P.L. Mao, K.U. Kainer, Z. Liu, N. Hort: Int. J. Cast Met. Res., 2010, vol. 24, pp. 170-76.10.1179/136404611X13001912813942 ↗
8. Z.S. Zhen, N. Hort, Y.D. Huang, O. Utke, N. Petri, K.U. Kainer: Int. J. Cast Met. Res., 2009, vol. 22, pp. 331-34.10.1179/136404609X368145 ↗
9. S. Sandlöbes, M. Friák, S. Zaefferer, A. Dick, S. Yi, D. Letzig, Z. Pei, L.F. Zhu, J. Neugebauer, D. Raabe: Acta Mater., 2012, vol. 60, pp. 3011-21.10.1016/j.actamat.2012.02.006 ↗
10. B.L. Wu, Y.H. Zhao, X.H. Du, Y.D. Zhang, F. Wagner, C. Esling: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4334-40.10.1016/j.msea.2010.03.054 ↗
11. Q.M. Peng, J. Meng, Y. Li, Y.D. Huang, N. Hort: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2106-09.10.1016/j.msea.2010.11.042 ↗
12. D.H. Bac, S.H. Kim, D.H. Kim, W.T. Kim: Acta Mater., 2002, vol. 50, pp. 2343-56.10.1016/S1359-6454(02)00067-8 ↗
13. D.K. Xu, W.N. Tang, L. Liu, Z.B. Xu, E.H. Han: J. Alloy. Compd., 2007, vol. 432, pp. 129-34.10.1016/j.jallcom.2006.05.123 ↗
14. P. Gunde, A. Schiffl, P.J. Uggowitzer: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7074-79.10.1016/j.msea.2010.07.086 ↗
15. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer, N. Hort: Mater. Des., 2013, vol, 47, pp. 90-100.10.1016/j.matdes.2012.12.044 ↗
16. Z.S. Zhen, N. Hort, Y.D. Huang, N. Petri, O. Utke, K.U. Kainer: Mater. Sci. Forum., 2009, vol. 619-619, pp. 533-40.10.4028/www.scientific.net/MSF.618-619.533 ↗
17. J.Z. Zhu, J. Guo, M.T. Samonds: Int. J. Numer. Method. Eng., 2011, vol. 87, pp. 289-308.10.1002/nme.3054 ↗
18. ProCAST 2010.0 User Manual, ESI Group Inc., 2010.
19. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2-15.10.1115/1.3443401 ↗
20. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer, N. Hort: J. Mater. Sci., 2014, vol. 49, pp. 353-62.10.1007/s10853-013-7712-z ↗
21. T.W. Clyne and G.J. Davies: Solid. Cast. Metal., edited by Sheffield, UK. 1977, pp. 275-78.
22. T.W. Clyne, G.J. Davies: Br. Foundrym., 1981, vol. 74, pp. 65-73.
23. M.B. Djurdjevic, R. Schmid-Fetzer: Mater. Sci. Eng. A, 2006, vol. 417, pp. 24-33.10.1016/j.msea.2005.08.227 ↗
24. A. Srinivasan, Z. Wang, Y. D. Huang, F. Beckmann, K. U. Kainer, N. Hort: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2285-98.10.1007/s11661-012-1593-7 ↗
25. C.H. Dickhaus, L. Ohm, S. Engler: AFS Trans., 1994, vol. 101, pp. 677-84.
26. E.L. Glasson, E.F. Emley: Solid. Metal., Iron and Steel Institute, London, UK, 1968, pp. 1-9.
27. D.H. Stjohn, Q. Ma, M.A. Easton, P. Cao, Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1669-79.10.1007/s11661-005-0030-6 ↗
28. Y.C. Lee, A.K. Dahle, D.H. Stjohn: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2895-2906.10.1007/BF02830349 ↗
29. H. KamguoKamga, D. Larouche, M. Bournane, A. Rahem: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7413-23.10.1016/j.msea.2010.08.025 ↗
30. F. D’Elia, C. Ravindran: AFS Trans., 2009, vol.117, pp.139-48.
31. S. Lin, C. Aliravci, M.O. Pekguleryuz. Metall Mater Trans. A, 2007, vol. 38, pp. 1056-68.10.1007/s11661-007-9132-7 ↗
32. M. Easton, J. Grandfield, D. StJohn, B. Rinderer: Mater. Sci. Forum., 2006, vol. 30, pp. 1675-80.10.4028/www.scientific.net/MSF.519-521.1675 ↗
33. A.K. Dahle, L. Arnberg: JOM, 1996, vol. 48, pp. 34-37.10.1007/BF03222888 ↗
34. D.G. Eskin, Suyitno, J.F. Mooney, L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1325-35.10.1007/s11661-004-0307-1 ↗