journal article·2001-06

Stress corrosion cracking relation with dezincification layer-induced stress

Xianzhong Guo, Kewei Gao, Lijie Qiao, Wuyang Chu

Publisher page

Abstract

Brass foil with a protective layer formed on one side was deflected during corrosion in an ammonia solution under various applied potentials, and then corrosion-induced stress generated at brass/dezincification layer under different potentials could be measured. At the same time, susceptibility to stress corrosion cracking (SCC) of brass in the ammonia solution under various applied potentials was measured by using a single-edge notched specimen. At open-circuit potential, both corrosion-induced tensile stress and susceptibility to SCC (Iσ) had a maximum value. Both tensile stress σp and susceptibility Iσ decreased slightly with decreasing potential under anodic polarization, but reduced steeply with a decrease in potential under cathodic polarization. At the cathodic potential of − 500 mVSCE, corrosioninduced stress became compressive because of the copper-plating layer; correspondingly, susceptibility to SCC was zero. Therefore, the variation of SCC susceptibility with potential is consistent with that of the corrosion-induced additive stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. B. Gu, J.W. Zhang, F.R. Wang, and W.Y. Chu: Scripta Metall., 1995, vol. 32, pp. 637–40.10.1016/0956-716X(95)90851-A ↗
2. W.Y. Chu, B. Gu, K.W. Gao, and Y.Z. Huang: Sci. China, 1997, vol. 40, pp. 235–42.10.1007/BF02916598 ↗
3. K.W. Gao, Y.B. Wang, and W.Y. Chu: Scripta Metall., 1997, vol. 36, pp. 259–64.10.1016/S1359-6462(96)00368-5 ↗
4. Y.Z. Huang, Q.Z. Chen, and W.Y. Chu: Mater Sci. Technol., 1996, vol. 12, pp. 215–18.
5. H.H. Uhlig: J. Electrochem. Soc., 1976, vol. 123, pp. 1699–1701.10.1149/1.2132671 ↗
6. B. Gu, W.Y. Chu, L.J. Qiao, and C.M. Hsiao: Corr. Sci., 1994, vol. 36, pp. 1437–45.10.1016/0010-938X(94)90191-0 ↗
7. J.C. Nelson and R.A. Oriani: Corr. Sci., 1993, vol. 34, pp. 307–26.10.1016/0010-938X(93)90009-6 ↗
8. N. Khalil and J.S.L. Leach: Electrochim. Acta, 1986, vol. 31, pp. 1279–85.10.1016/0013-4686(86)80148-7 ↗
9. H. Lu, K.W. Gao, and W.Y. Chu: Scripta Metall., 1997, vol. 37, pp. 1387–91.10.1016/S1359-6462(97)00249-2 ↗
10. H. Lu, K.W. Gao, and W.Y. Chu: Corr. Sci., 1998, vol. 40, pp. 1663–70.10.1016/S0010-938X(98)00063-8 ↗
11. K. Kermani and J.C. Scully: Corr. Sci., 1978, vol. 18, pp. 883–905.10.1016/0010-938X(78)90010-0 ↗
12. R.H. Jones: Stress-Corrosion Cracking, ASM International Materials Park, OH, 1992, pp. 211–31.
13. M. Smialawski: Hydrogen in Steel, Pergamon Press, New York, NY, 1962, pp. 207–10.
14. M. Kevin and M. Ferrar: Mater. Sci. Eng., 1997, vol. A232, pp. 88–102.