journal article·2000-04

Study of microstructure of low-temperature plasma-nitrided AISI 304 stainless steel

Xiaolei Xu, Liang Wang, Zhiwei Yu, Jianbing Qiang, Zukun Hei

Publisher page

Abstract

The microstructure of the low-temperature plasma-nitrided layer on AISI 304 austenitic stainless steel was studied by transmission electron microscopy (TEM). The results show that the surface of the layer consists of a supersaturated solid solution ({gamma}{prime}{sub N}) based on the {gamma}{prime}-Fe{sub 4}N phase whose electron diffraction pattern (EDP) has a strong diffuse scattering effect resulting from supersaturating nitrogen (above 20 at. pct) and {l_angle}110{r_angle} streaks arising from matrix elastic strain due to the formation of paired or clustered Cr-N. The latter is due to the N above to 20 at. pct {gamma}{prime}-Fe{sub 4}N-phase value and leads to a lattice parameter that is greater than that of the {gamma}{prime}-Fe{sub 4}N phase. The subsurface of the layer is composed of a supersaturated solid solution based on {gamma}-austenite, which is an expanded austenite, {gamma}{sub N}. Its morphology shows the basketweave or tweedlike contrast consisting of so-called stacking fault precipitates having twin relationships with the matrix whose EDP shows diffuse scattering streaks with certain directions. The {epsilon} martensite transformation was observed in the subsurface of the layer. The increase in stacking faults compared with the original stainless steel and formation of {epsilon} martensite in the subsurface of the layer indicate that nitrogen lowers themore » stacking fault energy of austenite.« less
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. X. Li, M. Samandi, D. Dunne, G. Collins, J. Tendys, K. Short, and R. Hutching: Surf. Coat. Technol., 1996, vol. 85, pp. 28–36.10.1016/0257-8972(96)02879-4 ↗
2. R. Wei, J.J. Vajo, J.N. Matossian, P.J. Wilbur, J.A. Davis and D.L. Williamson: Surf. Coat. Technol., 1996, vol. 83, pp. 235–42.10.1016/0257-8972(95)02825-0 ↗
3. D.L. Williamson, Li Wang, R. Wei, and P.J. Wilbur: Mater. Lett., 1990, vol. 9, pp. 302–08.10.1016/0167-577X(90)90166-J ↗
4. Z.L. Zhang and T. Bell: Sur. Eng., 1985, vol. 1, pp. 131–36.10.1179/sur.1985.1.2.131 ↗
5. Menthe, K.-T. Rie, J.W. Schultze, and S. Simson: Surf. Coat. Technol., 1995, vols. 74–75, pp. 412–16.10.1016/0257-8972(95)08246-8 ↗
6. A. Saker, C. Leroy, H. Michel, and C. Frantz: Mater. Sci. Eng., 1991, vol. 140, pp. 702–08.10.1016/0921-5093(91)90500-M ↗
7. Orhan Ozturk and D.L. Williamson: J. Appl. Phys., 1995, vol. 77, pp. 3839–50.10.1063/1.358561 ↗
8. D.L. Williamson, O. Ozturk, R. Wei, and P.J. Wilbur: Surf. Coat. Technol., 1994, vol. 65, pp. 15–23.10.1016/S0257-8972(94)80003-0 ↗
9. D.H. Jack and K.H. Jack: Mater. Sci. Eng., 1973, vol. 11, pp. 1–27.10.1016/0025-5416(73)90055-4 ↗
10. Pat L. Mangonon, Jr. and Gareth Thomas: Metall. Trans. 1970, vol. 6, pp. 1577–86.10.1007/BF02642003 ↗
11. J.M. Rigsbee: Metallography, 1978, vol. 11, pp. 493–98.10.1016/0026-0800(72)90074-2 ↗
12. Xiaolei Xu, Liang Wang, Zhiwei Yu, and Zukun Hei: Metall. Trans. A, 1996, vol. 27A, pp. 1347–52.
13. J.W. Edington: Practical Electron Microscopy in Materials Science (Part II), The Macmillan Press Ltd., London, 1975.