journal article·2002-07

Development of austenitic nanostructures in high-nitrogen steel powders processed by mechanical alloying

M. M. Cisneros, E. Valdés, D. Vázquez, H. F. López, H. Mancha, G. Mendoza, M. Méndez

Publisher page

Abstract

In this work, mechanical alloying was employed in producing high-nitrogen Fe18Cr11Mn stainles-steel powders. It was found that the nitrogen solubility in the powder mixtures increases exponentially with milling time at room temperature. Maximum nitrogen levels of 2.47 wt pct N were achieved after milling for 170 hours. In addition, the grain size structure continually decreased and reached a plateau at nanometric grain sizes of the order of 3 nm. In addition, measured, interplanar lattice spacing, d(110), did not follow a linear trend. Apparently, initially the nitrogen tendency was to be preferentially dissolved at dislocations and grain boundaries. However, after long milling times, the crystal lattice tended to be saturated with N. Annealing at 900 °C to 1200 °C for 2 hours led to various microstructures, where the matrix was almost always γ-iron, but Cr2N, CrN, and α-iron were also present depending on the annealing temperatures. In particular, it was found that a fully austenitic, nanometric grain structure can be achieved by annealing at 1000 °C and 1100 °C Fe18Cr11Mn alloys with 1.02 and 0.7 wt pct N, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. J.W. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–69.10.1016/0921-5093(95)09991-3 ↗
2. J. Menzel, W. Kirschner, and G. Stein: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 893–900.10.2355/isijinternational.36.893 ↗
3. J. Uggowitzer, R. Magdowski, and M.O. Speidel: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 901–908.10.2355/isijinternational.36.901 ↗
4. A.P. Tschiptschin, C.H. Aidar, F.B. Neto, and N. Alosno-Falleiros: Mater. Sci. Forum, 1999, vols. 318–320, pp. 569–76.10.4028/www.scientific.net/MSF.318-320.569 ↗
5. J.C. Rawers, J.S. Dunning, G. Asai, and R.P. Reed: Metall. Trans. A, 1992, vol. 23, pp. 2061–68.10.1007/BF02647552 ↗
6. R. Tandon, J.W. Simmons, B.S. Covino Jr., and J.H. Russel: Int. J. Powder Metall., 1998, vol. 34, pp. 47–54.
7. J.C. Rawers and D. Maurice: Acta Metall. Mater., 1995, vol. 43, pp. 4101–07.10.1016/0956-7151(95)00106-6 ↗
8. H. Miura, K. Omuro, and H. Ogawa: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 951–57.10.2355/isijinternational.36.951 ↗
9. J. Rawers, R. Krabbe, and D. Cook: Mater. Sci. Forum, 1999, vols. 318–320, pp. 695–700.10.4028/www.scientific.net/MSF.318-320.695 ↗
10. E. Werner: Mater. Sci. Eng. A., 1988, vol. A101, pp. 93–98.10.1016/0025-5416(88)90796-3 ↗
11. R.O. Scattergood and C.C. Koch: Scripta Metall. Mater., 1992, vol. 27, pp. 1195–1200.10.1016/0956-716X(92)90598-9 ↗
12. J. Schiotz, F.D. DiTolla, and K.W. Jacobsen: Nature, 1998, vol. 391, pp. 561–63.10.1038/35328 ↗
13. H.J. Fetch: Nanostruct. Mater., 1995, vol. 6, pp. 33–42.10.1016/0965-9773(95)00027-5 ↗
14. H.A. Wriedt, N.A. Gokcen, and R.H. Nafziger: Bull. Alloy Phase Diagr., 1987, vol. 8, p. 355.10.1007/BF02869273 ↗
15. K. Lu, Z.F. Dong, I. Bakonyi, and A. Cziraki: Acta Metall. Mater., 1995, vol. 43, pp. 2641–47.10.1016/0956-7151(94)00478-Z ↗
16. J. Eckert, J.C. Holzer, and W.L. Johnson: J. Appl. Phys., 1993, vol. 73, pp. 131–41.10.1063/1.353890 ↗
17. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
18. H.J. Hofler and R.S. Averback: Scripta Metall. Mater., 1990, vol. 24, pp. 2401–06.10.1016/0956-716X(90)90101-L ↗
19. C. Bansal, Z.Q. Gao, and B. Fultz: Nanostruct. Mater., 1995, vol. 5, pp. 327–36.10.1016/0965-9773(95)00236-8 ↗
20. K. Boylan, D. Ostrander, U. Erb, G. Palumbo, and K.T. Aust: Scripta Metall. Mater., 1991, vol. 25, pp. 2711–16.10.1016/0956-716X(91)90144-P ↗
21. D.B. Rayaproles and A. Henry: Mater. Sci. Technol., 1989, vol. 5, p. 328.10.1179/mst.1989.5.4.328 ↗
22. S. Hertzman and M. Jarl: Metall. Trans., 1987, vol. 18A, pp. 1745–52.10.1007/BF02646206 ↗
23. V. Raghavan: Metall. Mater. Trans., 1995, vol. 26A, pp. 237–42.10.1007/BF02664662 ↗
24. S.R. Chen, H.A. Davies, and W.M. Rainforth: Acta Mater., 1999, vol. 47, pp. 4555–69.10.1016/S1359-6454(99)00334-1 ↗