Liquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel in a Molten Zinc Bath
Source abstract
Abstract
Corrosion tests of 1015 low-carbon steel and two stainless steels (410 and 316L) were conducted in a pure zinc bath (99.98 wt pct Zn) in order to better understand the reaction mechanisms that occur during the degradation of submerged hardware at industrial general (batch) galvanizing operations. Through this testing, it was found that, in general, 316L stainless steel showed the best dissolution resistance among these three alloys, while 1015 carbon steel provided a lower solubility than 410 stainless steel. Investigating the failure mechanisms, both metallurgical composition and lattice structure played important roles in the molten metal corrosion behaviors of these alloys. High contents of nickel combined with the influence of chromium improved the resistance to molten zinc corrosion. Moreover, a face-centered-cubic (fcc) structure was more corrosion resistant than body-centered-cubic (bcc) possibly due to the compactness of the atomic structure. Analogously, the body-centered-tetragonal (bct) martensite lattice structure possessed enhanced susceptibility to zinc corrosion as a result of the greater atomic spacing and high strain energy. Finally, an increased bath temperature played an important role in molten metal corrosion by accelerating the dissolution process and changing the nature of intermetallic layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. M. Brunnock, R. Jones, G. Jenkins, D. Llewellyn: Ironmaking and Steelmaking, 1996, vol. 23, pp. 171–76
2. X. Liu, E. Barbero, J. Xu, M. Burris, K.-M. Chang, V. Sikka: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2049–5810.1007/s11661-005-0325-7 ↗
3. F. Goodwin, K.-M. Chang, V. Sikka: 94th Annual Meeting, Galvanizer’s Association, Dearborn, MI, 2002
4. M. Brunnock, R. Jones, G. Jenkins, D. Llewellyn: Zinc-Based Steel Coating Systems, TMS, Warrendale, PA, 1998, pp. 51–62
5. K. Tani, T. Tomita, ISIJ, 1994, vol. 34, pp. 822–2810.2355/isijinternational.34.822 ↗
6. B. Seong, S. Hwang, M.C. Kim, K.Y. Kim: Surf. Coat. Technol., 2001, vol. 138, pp. 101–1010.1016/S0257-8972(00)01136-1 ↗
7. M. Brunnock, R. Jones, G. Jenkins, D. Llewellyn: Ironmaking and Steelmaking, 1997, vol. 24, pp. 40–46
8. E. Barbero, X. Liu, B. Kang, J. Loth, J. Snider, V. Sikka, F. Goodwin: 95th Annual Meeting, Galvanizer’s Association, Monterrey, Mexico, 2003
9. N. Tang: J. Phase Equilib., 2000, vol. 21(1), pp. 70–7710.1361/105497100770340444 ↗
10. X. Su, N. Tang, J.M. Toguri: J. Alloys Compd., 2001, vol. 325, pp. 129–3610.1016/S0925-8388(01)01273-7 ↗
11. N. Tang, Y. Liu, K. Zhang: 44th Mechanical Working and Steel Processing Conf. Proc. (Iron and Steel Society), 2002, vol. 40, pp. 815–21
12. N. Tang: 97th Annual Meeting, Galvanizer’s Association, Lexington, KY, 2005
13. N. Tang: ZCO-15-4: Dross Buildup–Influences on the Hardware Materials and Line Operating Conditions, ILZRO Progress Report, International Lead Zinc Research Organization, Research Triangle, NC, Oct. 2005
14. E. Pennell: 76th Annual Meeting, Galvanizer’s Association, West Middlesex, PA, 1984
15. B. Dugan: AGA Galvanizing Note, American Galvanizers Association, Centennial, CO, Mar. 2006
16. M. Bright: Ph.D. Dissertation, West Virginia University, Morgantown, WV, 2007
17. V. Dybkov: J. Mater. Sci., 1990, vol. 25, pp. 3615–3310.1007/BF00575397 ↗
18. F. Barbier, J. Blanc: J. Mater. Res., 1999, vol. 14, pp. 737–4410.1557/JMR.1999.0099 ↗
19. D. Hortsmann and F.K. Peters: Proc. Conf. Intergalva ’70, Industrial Newspaper Ltd., London, UK, 1970, pp. 75–105
20. A. Turnbull, M.W. Carroll: Corr. Sci., 1990, vol. 30, pp. 667–7910.1016/0010-938X(90)90031-Y ↗
21. R.A. Holt and F.G. Elder: AECL-4586, Jan. 1974, 12 pp
22. K. Hidehiko, S. Hideo: Corr. Eng., 1985, vol. 34, pp. 18–22
23. ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1992
24. A.R.P. Ghuman, J.I. Goldstein: Metall. Trans., 1971, vol. 2, pp. 2903–1410.1007/BF02813270 ↗
25. A. Allen, J. Mackowiak: J. Inst. Met., 1962–63, vol. 91, pp. 369–72
26. M. Andreani, P. Azou, P. Bastien: C.R. Acad. Sci. Paris, 1966, vol. 263, pp. 1041–43