journal article·2014-12Open access

Pore Formation Upon Nitriding Iron and Iron-Based Alloys: The Role of Alloying Elements and Grain Boundaries

B. Schwarz, H. Göhring, S. R. Meka, R. E. Schacherl, E. J. Mittemeijer

Abstract

Pure iron and a series of iron-based Fe-Me alloys (with Me = Al, Si, Cr, Co, Ni, and Ge) were nitrided in a NH3/H2 gas mixture at 923 K (650 °C). Different nitriding potentials were applied to investigate the development of pores under ferrite and austenite stabilizing conditions. In all cases, pores developed in the nitrided microstructure, i.e., also and strikingly pure ferritic iron exhibited pore development. The pore development is shown to be caused by the decomposition of (homogeneous) nitrogen-rich Fe(-Me)-N phase into nitrogen-depleted Fe(-Me)-N phase and molecular N2 gas. The latter, gas phase can be associated with such high pressure that the surrounding iron-based matrix can yield. Thermodynamic assessments indicate that continued decomposition, i.e., beyond the state where yielding is initiated, is possible. Precipitating alloying-element nitrides, i.e., AlN, CrN, or Si3N4, in the diffusion zone below the surface, hinder the formation of pores due to the competition of alloying-element nitride (Me x N y ) precipitation and pore (N2) development; alloying elements reducing the solubility of nitrogen enhance pore formation. No pore formation was observed upon nitriding a single crystalline pure iron specimen, nitrided under ferrite stabilizing conditions, thereby exhibiting the essential function of grain boundaries for nucleation of pores.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. E.J. Mittemeijer: in ASM Handbook, vol. 4A, J.I. Dossett and G.E. Totten, eds., 2013, pp. 619–46.
2. D. Liedtke, U. Baudis, J. Boßlet, U. Huchel, H. Klümper-Westkamp, W. Lerche, and H.-J. Spies: Wärmebehandlung von Eisenwerkstoffen, 3rd ed., Expert-Verlag, Renningen-Malmsheim, 2006
3. P.M. Unterweiser and A.G. Gray, eds.: Source Book on Nitriding, ASM, Metals Park, OH, 1977.
4. H. C. F. Rozendaal, E. J. Mittemeijer, P. F. Colijn, and P. J. van der Schaaf: Metall. Trans. A, 1983, 14A, 395–99.10.1007/BF02644217 ↗
5. S. R. Meka and E. J. Mittemeijer: JOM, 2013, 65(6), 769-775.10.1007/s11837-013-0603-6 ↗
6. B. Prenosil: HTM, 1973, vol. 28, pp. 157–64.10.1515/htm-1973-280301 ↗
7. M. A. J. Somers and E. J. Mittemeijer: Surf. Eng., 1987, 3(2), 123–37.10.1179/sur.1987.3.2.123 ↗
8. M. A. J. Somers, B. J. Kooi, W. G. Sloof, and E. J. Mittemeijer: Surf. Interface Anal., 1992, 19(1-12), 633–37.10.1002/sia.7401901118 ↗
9. R. Hoffmann, E.J. Mittemeijer, and M.A.J. Somers: HTM, 1996, vol. 51, pp. 162–69.10.1515/htm-1996-510307 ↗
10. C. Middendorf and W. Mader: Z. Metallkd., 2003, 94(3), 333–40.10.3139/146.030333 ↗
11. I. Etsion: J. Tribol-T ASME, 2005, vol. 127, pp. 248–53.10.1115/1.1828070 ↗
12. E. J. Mittemeijer and M. A. J. Somers: Surf. Eng., 1997, 13(6), 483–97.10.1179/sur.1997.13.6.483 ↗
13. E. Lehrer: Z. Elektrochem., 1930, vol. 36, pp. 383–92.10.1002/bbpc.19300360606 ↗
14. E. J. Mittemeijer, M. van Rooyen, I. Wierszyllowski, H. C. F. Rozendaal, and P. F. Colijn: Z. Metallkd., 1983, 74(7), 473–83.
15. F.X. Lu: Inst Phys. Conf. Ser. No. 68, Chapter 9, 1983.
16. E. J. Mittemeijer: J. Met., 1985, 37(9), 16-20.
17. S. R. Meka, S. S. Hosmani, A. R. Clauss, and E. J. Mittemeijer: Int. J. Mater. Res., 2008, 99(7), 808–14.10.3139/146.101703 ↗
18. S. S. Hosmani, R. E. Schacherl, and E. J. Mittemeijer: Acta Mater., 2006, 54(10), 2783–92.10.1016/j.actamat.2006.02.017 ↗
19. J. Stein, R. E. Schacherl, M. Jung, S. R. Meka, B. Rheingans, and E. J. Mittemeijer: Int. J. Mater. Res., 2013, 104(11), 1053–65.10.3139/146.110968 ↗
20. E. J. Mittemeijer and J. T. Slycke: Surf. Eng., 1996, 12(2), 152–62.10.1179/sur.1996.12.2.152 ↗
21. M. Yu, G. Ma, and J. Li: Structural Plasticity: Limit, Shakedown and Dynamic Plastic Analyses of Structures, Springer Books, 2009.10.1007/978-3-540-88152-0 ↗
22. J.O. Anderson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
23. J. Kunze: HTM, 1996, 51(6), 348–54.10.1515/htm-1996-510606 ↗
24. K. D. Clarke, R. J. Comstock Jr., M. C. Mataya, C. J. Tyne, and D. K. Matlock: Metall Mater Trans A, 2008, 39A, 752-62.10.1007/s11661-008-9479-4 ↗
25. M.W. Chase Jr.: J Phys Chem Ref Data, Monograph 9, 1998, http://webbook.nist.gov, Accessed November 2013.
26. M.O. Speidel: Proc Stainless Steel World 2001 Conference, The Hague, The Netherlands, 2001.
27. M. L. G. Byrnes, M. Grujicic, and W. S. Owen: Acta Metall. Mater., 1987, 35(7), 1853–62.10.1016/0001-6160(87)90131-3 ↗
28. JCPDS: PDF-2 (2002) database. Version 2.1, International Center for Diffraction Data, 2002.
29. R.T. DeHoff and F.N. Rhines: Quantitative Microscopy, McGraw-Hill, New York, 1968.
30. J.L. Pouchou and F. Pichoir: Rech Aerospatiale, 1984, no. 3, pp. 167–92.
31. A.H. Jehn and P. Perrot: Aluminum-Iron-Nitrogen, Landolt-Börnstein New Series IV/11D1, Accessed November 2013.
32. P. Perrot: Chromium-Iron-Nitrogen, Landolt-Börnstein New Series IV/11D3, http://www.springermaterials.com, Accessed November 2013.
33. M. A. J. Somers, R. M. Lankreijer, and E. J. Mittemeijer: Philos. Mag. A, 1989, 59(2), 353–78.10.1080/01418618908205064 ↗
34. M. H. Biglari, C. M. Brakman, E. J. Mittemeijer, and S. van der Zwaag: Philos. Mag. A, 1995, 72(4), 931–47.
35. R. E. Schacherl, P. C. J. Graat, and E. J. Mittemeijer: Metall Mater Trans A, 2004, 35A, 3387–98.10.1007/s11661-004-0175-8 ↗
36. P. M. Hekker, H. C. F. Rozendaal, and E. J. Mittemeijer: J Mater Sci, 1985, 20(2), 718–29.10.1007/BF01026547 ↗
37. S.Y. Zaginaychenko, Z.A. Matysina, and M.I. Milyan: Fiz. Met. Metalloved, 1990, vol. 22, pp. 63–67.
38. A. Leineweber, F. Lienert, S. Glock, T. Woehrle, P. Schaaf, M. Wilke, and E.J. Mittemeijer: Z. Kristallogr. Proc., 2011, vol. 1, pp. 293–98.10.1524/9783486991321-049 ↗
39. J. Kunze and P. O. K. Friedrich: J. Mater. Sci. Lett., 1986, 5(8), 815–18.10.1007/BF01730101 ↗
40. E. J. Mittemeijer, M. H. Biglari, A. J. Bottger, N. M. van der Pers, W. G. Sloof, and F. D. Tichelaar: Scripta Mater., 1999, 41(6), 625–30.10.1016/S1359-6462(99)00143-8 ↗
41. S. R. Meka, K. S. Jung, E. Bischoff, and E. J. Mittemeijer: Philos. Mag., 2012, 92(11), 1435–55.10.1080/14786435.2011.648226 ↗
42. H. P. van Landeghem, M. Goune, and A. Redjaimia: Steel Res. Int., 2012, 83(6), 590–93.10.1002/srin.201100264 ↗
43. M. Fonovic, A. Leineweber, and E.J. Mittemeijer: Surf. Eng., 2013, vol. 30, pp. 16–20.10.1179/1743294413Y.0000000173 ↗
44. T. Bell and W. S. Owen: T Metall Soc AIME, 1967, 239(12), 1940.
45. Fe-Ni (Iron-Nickel), The Landolt-Börnstein Database IV/5, Springer Materials, http://www.springermaterials.com, Accessed November 2013.
46. J. D. Fast and M. B. Verrijp: J Iron Steel Ins, 1954, 176(1), 24–27.
47. H. J. Grabke and E. M. Petersen: Scripta Metall., 1978, 12(12), 1111–14.10.1016/0036-9748(78)90085-6 ↗
48. E. J. Mittemeijer: Fundamentals of Materials Science, 2010, Springer-Verlag, Berlin