journal article·2005-05

Effect of solidification cooling rate on the morphology and number per unit volume of primary Mg2Si particles in a hypereutectic Al-Mg-Si alloy

M. F. Ourfali, I. Todd, H. Jones

Publisher page

Abstract

Growth morphology and number $$\bar N_v $$ per unit volume have been determined vs withdrawal velocity V over the range 0.1 to 4 mm/s for primary Mg2Si in a Bridgman-solidified hypereutectic Al-Mg-Si alloy. Primary Mg2Si shows a transition from irregular or regular polyhedral to dendritic with increasing V, and $$\bar N_v $$ increases with solidification cooling rate $$\dot T$$ according to the relationship $$\bar N_v /\dot T = 270 \pm 110mm^3 (K/s) - 1 $$ . These results are compared with corresponding ones for Al-Mg-Si alloy wedge castings and for primary silicon in hypereutectic Al-Si alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. E.E. Schmid, K. von Oldenburg, and G. Frommeyer: Z. Metallkd., 1990, vol. 81, pp. 809–15.
2. M. Bamberger: in Synthesis of Lightweight Metals III, F.H. Froes et al., ed., TMS, Warrendale, PA, 1999, pp. 155–62.
3. J. Zhang, Y.-Q. Wang, B. Yang, and B.-L. Zhou: J. Mater. Res., 1999, vol. 14, pp. 68–74.10.1557/JMR.1999.0012 ↗
4. J. Zhang, Y.-Q. Wang, and B.-L. Zhou: Mater. Sci. Technol., 1999, vol. 15, pp. 1236–40.10.1179/026708399101505338 ↗
5. J. Zhang, Z. Fan, Y. Wang, and B. Zhou: J. Mater. Sci. Lett., 1999, vol. 18, pp. 783–84.10.1023/A:1006684916145 ↗
6. J. Zhang, Z. Fan, Y. Wang, and B. Zhou: Mater. Sci. Eng. A, 2000, vol. A281, pp. 104–12.10.1016/S0921-5093(99)00732-7 ↗
7. J. Zhang, Z. Fan, Y. Wang, and B. Zhou: Mater. Design, 2000, vol. 21, pp. 149–53.10.1016/S0261-3069(99)00100-4 ↗
8. J. Zhang, Z. Fan, Y.-Q. Wang, and B.-L. Zhou: Mater. Sci. Technol., 2000, vol. 16, pp. 913–18.10.1179/026708300101508685 ↗
9. J. Zhang, Z. Fan, Y.-Q. Wang, and B.-L. Zhou: Scripta Mater., 2000, vol. 42, pp. 1101–06.10.1016/S1359-6462(00)00338-9 ↗
10. J. Zhang, Z. Fan, Y.-Q. Wang, and B.-L. Zhou: J. Mater. Sci. Lett., 2000, vol. 19, pp. 1825–28.10.1023/A:1006702709371 ↗
11. J. Zhang, Z. Fan, Y.-Q. Wang, and B.-L. Zhou: Mater. Sci. Technol., 2001, vol. 17, pp. 494–96.10.1179/026708301773002581 ↗
12. N.J. Polley: Ph.D. Thesis, Brunel University, Oxbridge, West London, UK, Aug. 2003.
13. S.A. Moir and H. Jones: J. Cryst. Growth, 1991, vol. 113, pp. 77–82.10.1016/0022-0248(91)90011-S ↗
14. Y. Bayraktar, D. Liang, S.A. Moir, and H. Jones: Mater. Lett., 1992, vol. 15, pp. 314–16.10.1016/0167-577X(92)90092-X ↗
15. D. Liang, Y. Bayraktar, and H. Jones: Acta Metall. Mater., 1995, vol. 43, pp. 575–89.10.1016/0956-7151(94)00287-R ↗
16. O.M. Barabash, T.N. Legkaya, N.P. Korzhora, and O.V. Sulzhenko: Powder Metall. Met. Ceram., 2000, vol. 39, pp. 458–61.10.1023/A:1011314406064 ↗
17. I.R. Hughes and H. Jones: J. Mater. Sci., 1996, vol. 11, pp. 1781–93.10.1007/BF00708256 ↗
18. J.H. Perepezko: Materials Handbook, 9th edn., ASM, Metals Park, OH, 1988, vol. 15, p. 101.
19. H. Jones: Rapid Solidification of Metals and Alloys, The Institution of Metallurgists, London, 1982.
20. D. Liang and H. Jones: Mater. Sci. Eng. A, 1993, vol. A173, pp. 109–14.10.1016/0921-5093(93)90197-M ↗
21. K.A. Gschneidner: Solid State Phys., 1964, vol. 16, pp. 275–426.10.1016/S0081-1947(08)60518-4 ↗
22. P. Beardmore, B.W. Howlett, B.D. Lichter, and M.B. Bever: Trans. TMS-AIME, 1996, vol. 236, pp. 102–08.
23. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 303–05.
24. H. Biloni and W.J. Boettinger: in Physical Metallurgy, R.W. Cahn and P. Haasen, ed., Elsevier Science BV, 1996, ch 8.
25. R.L. Higginson and C.M. Sellars: Worked Examples in Quantitative Metallography, Maney Publ., London, 2003, p. 68.
26. J.W. Martin: Micromechanisms in Particle-Strengthened Alloys, Cambridge University Press, Cambridge, United Kingdom, 1980.