Effect of directionally solidified microstructures on the room-temperature fracture-toughness properties of Ni-33(at. pct)Al-33Cr-1Mo and Ni-33(at. pct)Al-31Cr-3Mo eutectic alloys grown at different solidification rates
Source abstract
Abstract
Directionally solidified (DS) Ni-33(at. pct)Al-33Cr-1Mo and Ni-33(at. pct)Al-31Cr-3Mo eutectic alloys were grown at different rates varying from 7.6 to 508 mm h−1. The microstructures consisted of eutectic colonies with parallel lamellar NiAl/(Cr,Mo) plates for solidification rates at and below 12.7 mm h−1. Cellular eutectic microstructures were observed at higher solidification rates, where the plates exhibited a radial pattern. Room-temperature fracture-toughness tests were conducted using a modified ASTM E-399 technique. The average fracture-toughness values for specimens with planar eutectic and cellular microstructures were about 12 to 15 and 17 MPa\(\sqrt m \), respectively, for both alloys. However, the Ni-33(at. pct)Al-33Cr-1Mo specimens grown at and above 254 mm h−1 exhibited fracture toughness values of about 8 MPa\(\sqrt m \) due to the presence of short (Cr,Mo) plates. The fracture toughness values for the Ni-33(at. pct)Al-31Cr-3Mo alloy were also correlated with quantitative microstructural data in an attempt to identify the relevant elements of the microstructure determining resistance to fracture. A phenomenological fracture model is presented in an attempt to rationalize the present observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. J.A. Nesbitt and C.E. Lowell: in High-Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 107–18.
2. W.S. Walston and R. Darolia: in High-Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 237–42.
3. R. Darolia, D.F. Lahrman, R.D. Field, J.R. Dobbs, K.M. Chang, E.H. Goldman, and D.G. Konitzer: Ordered Intermetallics—Physical and Mechanical Behavior, C.T. Liu, R.W. Cahn, and G. Sauthoff, eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1992, pp. 679–98.10.1007/978-94-011-2534-5_43 ↗
4. J.D. Whittenberger, E. Artz, and M.J. Luton: J. Mater. Res., 1990, vol. 5, pp. 2819–27.10.1557/JMR.1990.2819 ↗
5. J. Klöwer and G. Sauthoff: Z. Metallkd. 1991, vol. 82, pp. 510–18.
6. D.R. Johnson, X.F. Chen, B.F. Oliver, R.D. Noebe, and J.D. Whittenberger: Intermetallics, 1995, vol. 3, pp. 99–113.10.1016/0966-9795(95)92674-O ↗
7. W.S. Walston and R. Darolia: Structural Intermetallics—1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 613–19.
8. T.M. Pollock and D. Kolluru: Micromechanics of Advanced Materials: A Symp. in Honor of Professor James’ Li’s 70th Birthday, S.N.G. Chu, P.K. Liaw, R.J. Arsenault, K. Sadananda, K.S. Chan, W.W. Gerberich, C.C. Chau, and T.M. Kung, eds., TMS, Warrendale, PA, 1995, pp. 205–12.
9. J.M. Yang: JOM, 1997, vol. 49, pp. 40–43.10.1007/BF02914401 ↗
10. J.M. Yang, S.M. Jeng, K. Bain, and R.A. Amato: Acta Mater., 1997, vol. 45, pp. 295–305.10.1016/S1359-6454(96)00124-3 ↗
11. A. Misra, Z.L. Wu, M.T. Kush, and R. Gibala: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 75–87.10.1016/S0921-5093(97)00563-7 ↗
12. D.V. Kolluru and T.M. Pollock: Acta Mater., 1998, vol. 46, pp. 2859–76.10.1016/S1359-6454(97)00454-0 ↗
13. S.V. Raj, I.E. Locci, and J.D. Whittenberger: Creep Behavior of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K. Linga Murty, eds., TMS, Warrendale, PA, 1999, pp. 295–310.
14. I.E. Locci, S.V. Raj, J.D. Whittenberger, J.A. Salem, and D.J. Keller: High-Temperature Ordered Intermetallic Alloys VIII, E.P. George, M. Yamaguchi, and M.J. Mills, eds., Materials Research Society, Pittsburgh, PA, 1999, vol. 552, pp. KK8.1.1-KK8.1.6.
15. J.D. Whittenberger, S.V. Raj, I.E. Locci, and J.A. Salem: Intermetallics, 1999, vol. 7, pp. 1159–68.10.1016/S0966-9795(99)00023-0 ↗
16. J.D. Whittenberger, S.V. Raj, and I.E. Locci: High-Temperature Ordered Intermetallic Alloys IX, J.H. Schneibel, R.D. Noebe, S. Hanada, K.J. Hemker, and G. Sauthoff, eds., Materials Research Society, Pittsburgh, PA, 2001, vol. 646, pp. N 6.9-N 6.14.
17. S.V. Raj and I.E. Locci: Intermetallics, 2001, vol. 9, pp. 217–27.10.1016/S0966-9795(00)00128-X ↗
18. J.L. Walter and H.E. Cline: Metall. Trans., 1970, vol. 1, pp. 1221–29.10.1007/BF02900234 ↗
19. H.E. Cline and J.L. Walter: Metall. Trans., 1970, vol. 1, pp. 2907–17.10.1007/BF03037830 ↗
20. H.E. Cline, J.L. Walter, E. Lifshin, and R.R. Russell: Metall. Trans., 1971, vol. 2, pp. 189–94.10.1007/BF02662656 ↗
21. S.V. Raj and I.E. Locci: NASA Glenn Research Center, Cleveland, OH unpublished research, 1999; also J.D. Whittenberger, S.V. Raj, I.E. Locci, and J.A. Salem: Structural Intermetallics-2001 (ISSI-3), in press.
22. K.A. Jackson and J.D. Hunt: Trans AIME, 1966, vol. 236, pp. 1129–42.
23. Annual Book of ASTM Standards, 03.01, ASTM, West Conshohocken, PA, 1998, pp. 413–43.
24. Annual Book of ASTM Standards, 15.01, ASTM, West Conshohocken, PA, 2001, pp. 641–72.
25. S.R. Choi, A. Chulya, and J.A. Salem: NASA TM 105568, NASA Lewis Research Center, Cleveland, OH, Aug. 1992.
26. J.A. Salem, J.L. Shannon, and M.G. Jenkins: in Chevron Notch Test Experience: Metals and Non-Metals, ASTM STP 1172, K.R. Brown and F.I. Baratta, eds., ASTM, Philadelphia, PA, 1992, pp. 9–25.10.1520/STP24707S ↗
27. J.A. Salem, M.G. Jenkins, M.K. Ferber, and J.L. Shannon: Proc. Society of Experimental Mechanics, Society for Experimental Mechanics, Bethel, CT, 1991, pp. 762–69.
28. J.A. Salem, L.J. Ghosn, M.G. Jenkins, and G.D. Quinn: Ceram. Sci. Eng. Proc., 1999, vol. 20, pp. 503–12.10.1002/9780470294567.ch58 ↗
29. K.S. Kumar, S.K. Mannan, and R.K. Viswanadham: Acta Metall. Mater., 1992, vol. 40, pp. 1201–22.10.1016/0956-7151(92)90419-F ↗
30. F.E. Heredia, M.Y. He, G.E. Lucas, A.G. Evans, H.E. Dève, and D. Konitzer: Acta Metall. Mater., 1993, vol. 41, pp. 505–11.10.1016/0956-7151(93)90079-8 ↗
31. N. Rusovic and H. Warlimont: Phys. Status Solidi, 1979, vol. 53, pp. 283–88.10.1002/pssa.2210530132 ↗
32. L.J. Gibson and M.F. Ashby: Cellular Solids, Cambridge University Press, Cambridge, United Kingdom, 1997, p. 76.10.1017/CBO9781139878326 ↗