X-ray Diffraction Study on Cooling-Rate-Induced γ fcc→ε hcp Martensitic Transformation in Cast-Homogenized Fe-26Mn-0.14C Austenitic Steel
Source abstract
Abstract
The thermal stability of a cast homogenized austenitic steel with basic composition Fe-26Mn-0.14C has been studied using the Rietveld entire X-ray diffraction (XRD) pattern fitting technique. The decomposition of austenite was observed to be very sensitive to the cooling rate. A very high proportion (49 to 70 pct) of e-martensites was found in the differently cooled specimens as well in the as-cast specimen. The density of various planar (stacking and twin) faults was also estimated in both e-martensites and retained austenite. The significant variation in the extent of γ fcc→e hcp martensitic transformation was interpreted in terms of athermal and isothermal martensites formed during cooling and grain size of austenite. The austenite grains were found to be comprised of a high to moderate density of stacking faults (∼10−3 to 10−2) and negligible twin fault probability (∼10−5). On the other hand, in the e-martensites, the dominant planar fault was twins (∼10−3). Approximate values of the dislocation density within the retained austenite were also evaluated using the crystallite size and root-mean-square (rms) strain values obtained from the “size-strain-shape” analyses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Y. Tomota, M. Strum, J.W. Morris Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 537–4710.1007/BF02643961 ↗
2. Y.G. Kim, J.M. Han, J.S. Lee: Mater. Sci. Eng. A, 1989, vol. 114, pp. 51–5910.1016/0921-5093(89)90844-7 ↗
3. A. Sato, K. Soma, T. Mori: Acta Metall., 1982, vol. 30, pp. 1901–0710.1016/0001-6160(82)90030-X ↗
4. H. Schumann: Arch. Eisenhüttenwes, 1969, vol. 40, pp. 1027–3710.1002/srin.196904421 ↗
5. A. Seeger: Metallkd., 1956, vol. 47, pp. 653–60
6. Y. Hoshino, S. Nakamura, N. Ishikawaand, A. Sato: Mater. Sci. Forum, 1990, vols. 56–58, pp. 643–4810.4028/www.scientific.net/MSF.56-58.643 ↗
7. G.B. Olson, M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897–904
8. T.Y. Hsu, Xu Zuyao: Acta Metall. Sinica, 1980, vol. 16, pp. 430–34
9. K. Sato, M. Ichinose, Y. Hirotsu, Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–7710.2355/isijinternational.29.868 ↗
10. K. Ishida, T. Nishizawa: Trans. Jpn. Inst. Met., 1974, vol. 15, pp. 225–3110.2320/matertrans1960.15.225 ↗
11. R.E. Schramm, R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–5110.1007/BF02641927 ↗
12. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, pp. 65–7110.1107/S0021889869006558 ↗
13. L. Lutterotti: MAUD, version 2.038, http://www.ing.unitn.it/∼luttero/maud, 2006
14. P. Sahu: J. Appl. Cryst., 2005, vol. 38, pp. 112–2010.1107/S0021889804028717 ↗
15. T. Sawaguchi, P. Sahu, T. Kikuchi, K. Ogawa, S. Kajiwara, A. Kushibe, M. Higashino, T. Ogawa: Scripta Mater., 2006, vol. 54, pp. 1885–9010.1016/j.scriptamat.2006.02.013 ↗
16. P. Sahu: Intermetallics, 2006, vol. 14, pp. 180–8810.1016/j.intermet.2005.05.004 ↗
17. J.G.M. Van Berkum, G.J.M. Sprong, T.H. de Keijser, R. Delhez, E.J. Sonneveld: Powder Diffrac., 1995, vol. 10, pp. 129–3910.1017/S0885715600014512 ↗
18. R.A. Young: in The Rietveld Method, R.A. Young, ed., Oxford University Press, Oxford, United Kingdom, 1993, ch. 1
19. L. Lutterotti, P. Scardi, P. Maitrelli: J. Appl. Cryst., 1990, vol. 23, pp. 246–5210.1107/S0021889890002382 ↗
20. N.C. Popa: J. Appl. Cryst., 1998, vol. 31, pp. 176–8010.1107/S0021889897009795 ↗
21. R.J. Hill, C.J. Howard: J. Appl. Cryst., 1987, vol. 20, pp. 467–7410.1107/S0021889887086199 ↗
22. D.L. Bish, S.A. Howard: J. Appl. Cryst., 1988, vol. 21, pp. 86–9110.1107/S0021889887009415 ↗
23. B.E. Warren: X-ray Diffraction, Addison-Wesley, Reading, MA, 1969, ch.13
24. G.K. Williamson, R.E. Smallman: Phil. Mag., 1956, vol. 1, pp. 34–4610.1080/14786435608238074 ↗
25. L.J. Mangonon, G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–8610.1007/BF02642003 ↗
26. G. Krauss, A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343–5710.1007/BF02814873 ↗
27. Metals Handbook, 10th ed., ASM, Materials Park, OH, 1990, vol. 1, p. 822
28. K. Ishida: Scripta Metall., 1977, vol. 11, pp. 237–4210.1016/0036-9748(77)90061-8 ↗
29. O. Grässel, G. Frommeyer, C. Derder, H. Hofmann: J. Phys. France, 1997, vol. 7 (C5), pp. 383–88
30. Y.K. Lee, C.S. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–6010.1007/s11661-000-0271-3 ↗
31. A. Borgenstam, M. Hillert, J. Agren: Acta Mater., 1995, vol. 43, pp. 945–5410.1016/0956-7151(94)00311-5 ↗
32. A. Borgenstam, M. Hillert: Acta Mater., 1997, vol. 45, pp. 651–6210.1016/S1359-6454(96)00186-3 ↗
33. P. Sahu, A.S. Hamada, S. Ghosh Chowdhury, L.P. Karjalainen: J. Appl. Cryst., 2007, vol. 40, pp. 354–6110.1107/S0021889807005882 ↗
34. S. Ghosh Chowhury, R.K. Ray, A.K. Jena: Mater. Sci. Eng. A, 2000, vol. 277, pp. 1–1010.1016/S0921-5093(99)00564-X ↗
35. C. Garcia-Mateo, F.G. Caballero, H.K.D.H Bhadeshia: Mater. Sci. Forum, 2005, vols. 500–501, pp. 495–50210.4028/www.scientific.net/MSF.500-501.495 ↗