journal article·2001-02

Reaction synthesis of Ni-Al-based particle composite coatings

D. F. Susan, W. Z. Misiolek, A. R. Marder

Publisher page

Abstract

Electrodeposited metal matrix/metal particle composite (EMMC) coatings were produced with a nickel matrix and aluminum particles. By optimizing the process parameters, coatings were deposited with 20 volume percent aluminum particles. Coating morphology and composition were characterized using light optical microscopy (LOM), scanning electron microscopy (SEM), and electron probe microanalysis (EPMA). Differential thermal analysis (DTA) was employed to study reactive phase formation. The effect of heat treatment on coating phase formation was studied in the temperature range 415 to 1,000 C. Long-time exposure at low temperature results in the formation of several intermetallic phases at the Ni matrix/Al particle interfaces and concentrically around the original Al particles. Upon heating to the 500--600 C range, the aluminum particles react with the nickel matrix to form NiAl islands within the Ni matrix. When exposed to higher temperatures (600--1,000 C), diffusional reaction between NiAl and nickel produces ({gamma})Ni{sub 3}Al. The final equilibrium microstructure consists of blocks of ({gamma}{prime})Ni{sub 3}Al in a {gamma}(Ni) solid solution matrix, with small pores also present. Pore formation is explained based on local density changes during intermetallic phase formation and microstructural development is discussed with reference to reaction synthesis of bulk nickel aluminides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. R. Bazzard and P.J. Boden: Trans. Inst. Met. Finishing, 1972, vol. 50, pp. 63–69.10.1080/00202967.1972.11870221 ↗
2. J. Foster, B.P. Cameron, and J.A. Carew: Trans. Inst. Met. Finishing, 1985, vol. 63, pp. 115–19.10.1080/00202967.1985.11870719 ↗
3. F.J. Honey, E.C. Kedward, and V. Wride: J. Vacuum Sci. Technol., 1986, vol. 4(6), pp. 2593–97.10.1116/1.573732 ↗
4. T. Osaka, I. Koiwa, M. Usuda, K. Arai, and I. Saito: J. Electrochem. Soc., 1989, vol. 136 (4) pp. 1124–28.10.1149/1.2096797 ↗
5. M. Izaki, M. Fukusumi, H. Enomoto, T. Omi, and Y. Nakayama: J. Jpn. Inst. Met., 1993, vol. 57 (2), pp. 182–89.10.2320/jinstmet1952.57.2_182 ↗
6. D.F. Susan, A.R. Marder, and K. Barmack: Thin Solid Films, 1997, vol. 307, pp. 133–40.10.1016/S0040-6090(98)80004-7 ↗
7. K. Barmak, S.W. Banovic, C.M. Petronis, D.F. Susan, and A.R. Marder: J. Microsc., 1997, vol. 185, part 2, pp. 265–74.10.1046/j.1365-2818.1997.d01-606.x ↗
8. M.P. Brady, B.A. Pint, P.F. Tortorelli, I.G. Wright, and R.J. Hanrahan: in Corrosion and Environmental Degradation of Materials, vol. 19B, Materials Science and Technology, M. Schutze, ed., Wiley-VCH, Weinheim, in press.
9. J. Doychak: in Intermetallic Compounds: Vol. 1. Principles, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., New York, NY, 1995.
10. K.A. Philpot, Z.A. Munir, and J.B. Holt: J. Mater. Sci., 1987, vol. 22, pp. 159–69.10.1007/BF01160566 ↗
11. A. Varma and J.-P. Lebrat: Chem. Eng. Sci., 1992, vol. 47 (9–11), pp. 2179–94.10.1016/0009-2509(92)87034-N ↗
12. N. Guglielmi: J. Electrochem. Soc., 1972, vol. 119 (8), pp. 1009–12.10.1149/1.2404383 ↗
13. R.A.F. Hammond: Met. Finishing J., 1970, June, pp. 169–76.
14. American Society for Metals: Metals Handbook, 9th ed., 1979, vol. 5, pp. 199–218.
15. S.W. Banovic, K. Barmak, and A.R. Marder: J. Mater. Sci., 1998, vol. 33, pp. 639–45.10.1023/A:1004321224586 ↗
16. G. Beuers, C. Batzner, and H.L. Lukas: in Ternary Alloys, G. Petzow and G. Effenburg, eds., VCH Publishers, New York, NY, 1993, vol. 7.
17. ASM Handbook, 10th ed., H. Baker, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 3, p. 2.49.
18. W.Z. Misiolek and R.M. German: 1990 Advances in Powder Metallurgy, MPIF, Princeton, NJ, 1990, vol. 2, pp. 161–72.
19. C. Nishimura and C.T. Liu: Scripta Metall. Mater., 1992, vol. 26, pp. 381–85.10.1016/0956-716X(92)90616-M ↗
20. C. Nishimura and C.T. Liu: Acta Metall. Mater., 1993, vol. 41 (1), pp. 113–20.10.1016/0956-7151(93)90343-Q ↗
21. R. Hultgren: Selected Values of Thermodynamic Properties of Metals and Alloys, ASM, Metals Park, OH, 1973, p. 191.
22. A. Bose, B. Moore, R.M. German, and N.S. Stoloff: JOM, 1988, Sept., pp. 14–17.10.1007/BF03258543 ↗
23. J.B. Holt and S.D. Dunmead: Ann. Rev. Mater. Sci., 1991, vol. 21, pp. 305–34.10.1146/annurev.matsci.21.1.305 ↗
24. W.Z. Misiolek and R.M. German: Mater. Sci. Eng. A, 1991, vol. A144, pp. 1–10.10.1016/0921-5093(91)90204-Z ↗
25. D. Alman: J. Mater. Sci. Lett., 1994, vol. 13, pp. 483–86.10.1007/BF00540174 ↗
26. D.C. Dunand, J.L. Sommer, and A. Mortensen: Metal. Trans. A, 1993, vol. 24A, pp. 2161–70.10.1007/BF02648590 ↗
27. D.C. Dunand: J. Mater. Sci., 1994, vol. 29, pp. 4056–60.10.1007/BF00355969 ↗
28. W.Z. Misiolek, N.D. Sopchak, and R.M. German: in Processing and Fabrication of Advanced Materials for High Temperature Applications, V.A. Ravi and T.S. Srivatsan, eds., TMS, Warrendale, PA, 1992, pp. 187–92.
29. Metals Handbook, Desk ed., ASM, Materials Park, OH, 1985, pp. 1.44–1.47.
30. M. Watanabe, Z. Horita, D.J. Smith, M.R. McCartney, T. Sano, and M. Nemoto: Defect Diffusion Forum, 1993, vols. 95–98, p. 587.10.4028/www.scientific.net/DDF.95-98.587 ↗
31. M.M.P. Jansenn and G.D. Rieck: Trans. AIME, 1967, vol. 239, pp. 1372–85.
32. W.Z. Misiolek: in Processing and Fabrication of Advanced Materials for High Temperature Applications—II, V.A. Ravi and T.S. Srivatsan, eds., TMS, Warrendale, PA, 1993, pp. 279–89.
33. W.Z. Misiolek, T.D. Schurman, and N.D. Sopchak: Advances in Powder Metallurgy and Particulate Materials—1992, MPIF, Princeton, NJ, 1992, vol. 9, pp. 411–22.