Effect of Frequency, Environment, and Temperature on Fatigue Behavior of E319 Cast-Aluminum Alloy: Small-Crack Propagation
Source abstract
Abstract
The influence of test frequency on fatigue-crack propagation behavior of small cracks in E319 cast-aluminum alloy was studied using ultrasonic and conventional test techniques. It was observed that fatigue cracks grow faster at 30 Hz than at 20 kHz in air at both 20 °C and 250 °C. The effect of frequency on the fatigue-crack growth rates was attributed to an environmental effect. For E319 cast-aluminum alloy, fatigue-crack growth rate increases with increasing water exposure (characterized by the ratio of water partial pressure over test frequency, P/f), and this behavior can be estimated using a modified superposition model. The effect of temperature on fatigue-crack growth behavior was primarily attributed to the effect of temperature on Young’s modulus and yield strength. The environmental contribution to fatigue-crack growth rates modestly decreases with increasing temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M.J. Caton, J.W. Jones, J.M. Boileau, and J.E. Allison: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3055–6810.1007/s11661-999-0216-4 ↗
2. M.J. Couper, A.E. Neeson, and J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13 (3), pp. 213–2710.1111/j.1460-2695.1990.tb00594.x ↗
3. B. Skallerud, T. Iveland, and G. Harkegard: Eng. Fract. Mech., 1993, vol. 44 (6), pp. 857–7410.1016/0013-7944(93)90108-5 ↗
4. X. Zhu, A. Shyam, J.W. Jones, H. Mayer, J.V. Lasecki, and J.E. Allison: Int. J. Fatigue, 2006, vol. 28 (11), pp. 1566–7110.1016/j.ijfatigue.2005.04.016 ↗
5. L.E. Coffin: in Ultrasonic Fatigue, J.M. Wells, O. Buck, L.D. Roth, and J.K. Tien, eds., TMS-AIME, Warrendale, PA, 1982, p. 423
6. C. Laird and P. Charlsey: in Ultrasonic Fatigue, J.M. Wells, O. Buck, L.D. Roth, and J.K. Tien, eds., TMS-AIME, Warrendale, PA, 1982, p. 183
7. J.K. Tien: in Ultrasonic Fatigue, J.M. Wells, O. Buck, L.D. Roth, and J.K. Tien, eds., TMS-AIME, Warrendale, PA, 1982, p. 1
8. B. Holper, H. Mayer, A.K. Vasudevan, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25 (5), pp. 397–41110.1016/S0142-1123(02)00163-9 ↗
9. B. Holper, H. Mayer, A.K. Vasudevan, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2004, vol. 26 (1), pp. 27–3810.1016/S0142-1123(03)00092-6 ↗
10. J. Ruiz, and M. Elices: Vacuum, 1994, vol. 45 (10–11), pp. 1069–7110.1016/0042-207X(94)90025-6 ↗
11. S.E. Stanzl, H.R. Mayer, and E.K. Tschegg: Mater. Sci. Eng., A, 1991, vol. 147 (1), pp. 45–5410.1016/0921-5093(91)90803-U ↗
12. M. Papakyriacou, H. Mayer, U. Fuchs, S.E. Stanzl-Tschegg, and R.P. Wei: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25 (8–9), pp. 795–80410.1046/j.1460-2695.2002.00571.x ↗
13. R.S. Piasick, and R.P. Gangloff: Metall. Trans. A, 1991, vol. 22A, pp. 2415–2810.1007/BF02665008 ↗
14. J. Petit, G. Henaff, and C. Sarrazin-Baudoux: Environmentally Assisted Fatigue in Gaseous Atmosphere, Elsevier Press, Amsterdam, 2003, pp. 211–80
15. M. Gao, P.S. Pao, and R.P. Wei: Metall. Trans. A, 1988, vol. 19A, pp. 1739–5010.1007/BF02645142 ↗
16. C.C. Engler-Pinto, Jr., R.J. Frisch, Sr., J.V. Lasecki, J.E. Allison, X. Zhu, and J.W. Jones: SAE Technical Paper 2006-01-0540, SAE International, Warrendale, PA
17. X. Zhu: Ph.D. Dissertation, University of Michigan, Ann Arbor, MI, 2007
18. X. Zhu, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 2007, vol. 38A, doi:10.1007/s11661-008-9631-110.1007/s11661-008-9631-1 ↗
19. J. Huang, J.E. Spowart, and J.W. Jones: Fatigue Fract. Eng. Mater. Struct., 2006, vol. 29 (7), pp. 507–1710.1111/j.1460-2695.2006.00998.x ↗
20. A.T. Shyam, S.K. Jha, J.M. Larsen, M.J. Caton, C.J. Szczepanski, T.M. Pollock, and J.W. Jones: Superalloys, 2004, Champion, PA, 2004
21. J.Z. Yi, C.J. Torbet, Q. Feng, T.M. Pollock, and J.W. Jones: Mater. Sci. Eng., A, 2007, vol. 443 (1–2), pp. 142–49
22. R.E. Peterson: Stress Concentration Factors, John Wiley & Sons, New York, NY, 1974, p. 37
23. Q. Feng, Y.N. Picard, H. Liu, S.M. Yalisove, G. Mourou, and T.M. Pollock: Scripta Mater., 2005, vol. 53 (5), pp. 511–1610.1016/j.scriptamat.2005.05.006 ↗
24. J.C. Newman, and I.S. Raju: Eng. Fract. Mech., 1981, vol. 15, pp. 185–9210.1016/0013-7944(81)90116-8 ↗
25. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: VHCF-4, TMS, Warrendale, PA, 2007
26. J. Petit, and C. Sarrazin-Baudoux: Int. J. Fatigue, 2006, vol. 28 (11), pp. 1471–7810.1016/j.ijfatigue.2005.06.057 ↗
27. R.P. Gangloff: Hydrogen-Assisted Cracking, Elsevier Press, Amsterdam, 2003, pp. 31–101
28. C.C. Engler-Pinto, Jr., J.V. Lasecki, J.M. Boileau, and J.E. Allison: SAE Technical Paper 2004-01-1029
29. R.P. Wei: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25 (8–9), pp. 845–5410.1046/j.1460-2695.2002.00551.x ↗
30. E.A. Mason, and A.P. Malinauskas: Gas Transport in Porous Media: The Dusty-Gas Model, Elsevier Press, Amsterdam, 1983
31. R.P. Wei, P.S. Pao, R.G. Hart, T.W. Weir, and G.W. Simmons: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 151–5810.1007/BF02700451 ↗
32. A.D.B. Gingell, and J.E. King: Acta Mater., 1997, vol. 45 (9), pp. 3855–7010.1016/S1359-6454(97)00033-5 ↗
33. N.J.H. Holroyd, and D. Hardie: Corros. Sci., 1983, vol. 23 (6), pp. 527–3110.1016/0010-938X(83)90117-8 ↗
34. D.J. Fisher: Hydrogen Diffusion in Metals—A 30-Year Retrospective, Scitec Publications Ltd., Uetikon-Zürich, Switzerland, 1999, pp. 30–3110.4028/b-NP6sMj ↗
35. C.C. Engler-Pinto Jr., R.J. Frisch Sr., J.V. Lasecki, H. Mayer, and J.E. Allison: VHCF-4, TMS, Warrendale, PA, 2007