journal article·2006-03

Modeling of microporosity formation in A356 aluminum alloy casting

J. D. Zhu, S. L. Cockcroft, D. M. Maijer

Publisher page

Abstract

A numerical model for predicting microporosity formation in aluminum castings has been developed, which describes the redistribution of hydrogen between solid and liquid phases, the transport of hydrogen in liquid by diffusion, and Darcy flow in the mushy zone. For simulating the nucleation of hydrogen pores, the initial pore radius is assumed to be a function of the secondary dendrite arm spacing, whereas pore growth is based on the assumption that hydrogen activity within the pore and the liquid are in equilibrium. One of the key features of the model is that it uses a two-stage approach for porosity prediction. In the first stage, the volume fraction of porosity is calculated based on the reduced pressure, whereas, in the second stage, at fractions solid greater than the liquid encapsulation point, the fraction porosity is calculated based on the volume of liquid trapped within the continuous solid network, which is estimated using a correlation based on the Niyama parameter. The porosity model is used in conjunction with a thermal model solved using the commercial finite-element package ABAQUS. The parameters influencing the formation of microporosity are discussed including a means to describe the supersaturation of hydrogen necessary for pore nucleation. The model has been applied to examine the evolution of porosity in a series of experimental samples cast using unmodified A356 in which the initial hydrogen content was varied from 0.048 to 0.137 (cc/100 g). A comparison between the model predictions and the experimental measurements indicates good agreement in terms of the variation in porosity with distance from the chill and the variation resulting from initial hydrogen content.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. E. Niyama, T. Uchida, M. Morikawa, and S. Saito: Int. Cast Met. J., 1981, pp. 16–22.
2. E. Niyama, T. Uchida, M. Morikawa, and S. Saito: AFS Int. Cast Met. Inst. J., 1982, vol. 7, pp. 52–63.
3. Y.W. Lee, E. Chang, and C.F. Chieu: Metall. Trans. B, 1999, vol. 21B, pp. 715–22.
4. S.-T. Kao and E. Chang: AFS Trans., 1996, vol. 104, pp. 545–49.
5. S.-T. Kao and E. Chang: Cast Met., 1995, vol. 7 (4), pp. 219–25.10.1080/09534962.1995.11819182 ↗
6. V.K. Suri, C. Cheng, and A.J. Paul: Light Met., 1994, pp. 907–12.
7. V.K. Suri, H. Huang, J.T. Berry, and J.L. Hill: AFS Trans., 1992, vol. 100, pp. 399–407.
8. V. Laurent and C. Rigaut: AFS Trans., 1992, vol. 100, pp. 647–55.
9. H. Huang and J.T. Berry: AFS Trans., 1993, vol. 101, pp. 669–75.
10. P. Vo, D. Maijer, C. Hermesmann, and S.L. Cockcroft: in Light Metals 2001, J. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 1115–21.
11. Q.T. Fang and D.A. Granger: AFS Trans., 1989, vol. 97, pp. 989–1000.
12. R. Coble and M.C. Flemings: Metall. Trans., 1971, vol. 2, pp. 409–15.10.1007/BF02663327 ↗
13. R. Mehrabian, M. Keane, and M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 1209–20.10.1007/BF02900233 ↗
14. K. Kubo and R. Pehlke: Metall. Trans. B, 1985, vol. 16B, pp. 359–66.10.1007/BF02679728 ↗
15. J. Ampuero, A.F.A. Hoadley, and M. Rappaz: in Modeling of Casting, Welding, and Advanced Solidification Processes V, M. Rappaz et al., eds., TMS, Warrendale, PA, 1990, pp. pp. 449–54.
16. J.D. Zhu and I. Ohnaka: in Modeling of Casting, Welding, and Advanced Solidification Processes V, M. Rappaz et al., eds., TMS, Warrendale, PA, 1990, pp. 435–42.
17. S. Chang and D.M. Stefanescu: Metall. Trans. A, 1996, vol. 27A, pp. 2708–21.10.1007/BF02652365 ↗
18. S. Shivkumar, D. Apelian, and J. Zou: AFS Trans., 1990, vol. 98, pp. 897–904.
19. T.S. Piwonka and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236 (8), pp. 1157–65.
20. J. Huang, T. Mori, and J.G. Conley: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1249–60.10.1007/s11663-998-0048-4 ↗
21. P.D. Lee, A. Chirazi, and D. See: J. Light Met., 2001, vol. 1, pp. 15–30.10.1016/S1471-5317(00)00003-1 ↗
22. P.D. Lee and J.D. Hunt: Acta Mater., 2001, vol. 49, pp. 1383–98.10.1016/S1359-6454(01)00043-X ↗
23. C. Pequet, M. Gremaud, and M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–106.10.1007/s11661-002-0041-5 ↗
24. Y. Sako, I. Ohnaka, J.D. Zhu, and H. Yasuda: The 7th Asian Foundry Congr., Y.N. Pan, et al., ed., The Chinese Foundrymen’s Association, Taipei, Taiwan, Oct. 12–15, 2001, pp. 363–69.
25. J.D. Zhu, S.L. Cockcroft, D. Maijer, and R. Ring: Int. J. Cast Met. Res., 2005, vol. 18, pp. 229–35.10.1179/136404605225022856 ↗
26. Phoung Vo: Master’s Thesis, University of British Columbia, Vancouver, 2001.
27. P. Vo, D. Maijer, S.L. Cockcroft, M.A. Wells, and C. Hermesmann: Proceeding of the 2001 TMS Fall Extraction and Process Metallurgy Meeting on Computational Modeling of Materials, Minerals and Metals Processing, M. Cross, J.W. Evans, and C. Bailey, eds., New Orleans, February 2001, pp. 357–63.
28. D. Maijer, M. Wells, S. Cockcroft, T. Luciuk, and C. Hermesmann: Mathematical Modeling in Metal Processing and Manufacturing: COM 2000, 39th Conf. of Metallurgists, P. Martin, ed., p. 14.
29. W. Eichenauer and J.Z. Markopoulos: Z. Metallkunde, 1974, vol. 65 (10), pp. 649–52.
30. R.C. Atwood, S. Sridhar, W. Zhang, and P.D. Lee: Acta Mater., 2000, vol. 48, pp. 405–17.10.1016/S1359-6454(99)00363-8 ↗