journal article·2004-08Open access

Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels

Han Sang Lee, Byoungchul Hwang, Sunghak Lee, Chang Gil Lee, Sung-Joon Kim

Abstract

The effects of martensite morphology and tempering on the quasistatic and dynamic deformation behavior of dual-phase steels were investigated in this study. Dynamic torsional tests were conducted on six steel specimens, which had different martensite morphologies and tempering conditions, using a torsional Kolsky bar, and then the test data were compared via microstructures, tensile properties, and fracture mode. Bulky martensites were mixed with ferrites in the step-quenched (SQ) specimens, but small martensites were well distributed in the ferrite matrix in the intermediate-annealed (IA) specimens. Under a dynamic loading condition, the fracture mode of the SQ specimens was changed from cleavage to ductile fracture as the tempering temperature increased, whereas the IA specimens showed a ductile fracture mode, irrespective of tempering. These phenomena were analyzed in terms of a rule of mixtures applied to composites, microstructural variation, martensite softening and carbon diffusion due to tempering, and adiabatic shear-band formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 41–52.10.1007/BF02647169 ↗
2. A.M. Memari, A.A. Aghakouchak, M. Ghafory Ashtiany, and M. Tiv: Eng. Struct., 1999, vol. 21, pp. 1115–27.10.1016/S0141-0296(98)00068-6 ↗
3. H.J. Ryu, S.H. Hong, D.-K. Kim, and S. Lee: Met. Mater. Int., 1998, vol. 4, pp. 367–71.10.1007/BF03187793 ↗
4. W. Böhme, G. Bernauer, and W. Schmitt: Nucl. Eng. Des., 1999, vol. 188, pp. 149–54.10.1016/S0029-5493(99)00011-4 ↗
5. S. Kim and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1753–60.10.1007/s11661-998-0328-2 ↗
6. Y.S. Kim, T.M. Lee, C. Kim, and S.M. Hwang: Met. Mater. Int., 2002, vol. 8, pp. 359–65.10.1007/BF03186108 ↗
7. R.B. Clough, S.C. Webb, and R.W. Armstrong: Mater. Sci. Eng., 2003, vol. 360, pp. 396–407.10.1016/S0921-5093(03)00499-4 ↗
8. C.S. Kang, S.Y. Chang, and S.K. Hong: Met. Mater. Int., 2003, vol. 9, pp. 439–46.10.1007/BF03027148 ↗
9. C.K. Toh: Mater. Design, 2004, vol. 25, pp. 41–50.10.1016/S0261-3069(03)00160-2 ↗
10. K.C. Kim, J.T. Kim, J.I. Suk, U.H. Sung, and H.K. Kwon: Nucl. Eng. Des., 2004, vol. 228, pp. 151–59.10.1016/j.nucengdes.2003.06.014 ↗
11. G. Thomas and J.Y. Koo: Structure and Properties of Dual Phase Steels, AIME, New York, NY, 1979.
12. N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483–89.10.1007/BF02648546 ↗
13. N.J. Kim and A.H. Nakagawa: Mater. Sci. Eng. A, 1986, vol. 83A, pp. 145–49.10.1016/0025-5416(86)90181-3 ↗
14. D. Suh, D. Kwon, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 504–08.10.1007/s11661-997-0152-0 ↗
15. K.J. Kim, C.G. Lee, and S. Lee: Scripta Mater., 1998, vol. 38,pp. 27–32.10.1016/S1359-6462(97)00428-4 ↗
16. H. Kolsky: Proc. Phys. Soc., 1949, vol. 62B, pp. 676–700.10.1088/0370-1301/62/11/302 ↗
17. K.A. Hatley, J. Duffy, and R.H. Hawley: Metals Handbook, 9th ed., ASM, Metals Park, OH, 1985, vol. 8, pp. 218–28.
18. A. Gilat: in ASM Handbook, ASM INTERNATIONAL, Metals Park, OH, 2000, vol. 8, pp. 505–16.
19. D.-K. Kim, S. Lee, and H.-S. Song: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1261–73.10.1007/s11661-999-0275-6 ↗
20. S.S.M. Tavares, P.D. Pedroza, J.R. Teodosio, and T. Gurova: Scripta Mater., 1999, vol. 40, pp. 887–92.10.1016/S1359-6462(99)00042-1 ↗
21. R. Datta, V. Raghavan, V. Ramaswamy, and S. Mishra: J. Mater. Sci. Lett., 1989, vol. 8, pp. 1480–82.10.1007/BF00720230 ↗
22. A.K. Panda, D.S. Sarma, R.I. Ganguly, and S. Misra: Steel Res., 1993, vol. 64, pp. 513–16.10.1002/srin.199301563 ↗
23. B.K. Jha, R. Avtar, V.S. Dwivedi, and N.S. Mishra: Steel Res., 1993, vol. 64, pp. 171–77.10.1002/srin.199301004 ↗
24. A. Joarder, J.N. Jha, S.N. Ojga, and D.S. Sarma: Mater. Characterization, 1990, vol. 25, pp. 199–209.10.1016/1044-5803(90)90010-H ↗
25. Metals Handbook, 10th ed., ASM, Metals Park, OH, 1990, vol. 1,pp. 240–47.
26. I.A. El-Sesy and Z.M. El-Baradie: Mater. Lett., 2002, vol. 57, pp. 580–85.10.1016/S0167-577X(02)00833-9 ↗
27. W.D. Callister: Material Science and Engineering—an Introduction, 4th ed., John Wiley & Sons, Inc., New York, NY, 1997, pp. 517–25.
28. S. Sun and M. Pugh: Mater. Sci. Eng., 2001, vol. A318, pp. 320–27.10.1016/S0921-5093(01)01251-5 ↗
29. D. Suh, D. Kwon, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 504–08.10.1007/s11661-997-0152-0 ↗
30. S. Lee, K. Cho, C.S. Lee, and W.Y. Choo: Metall. Trans. A, 1993, vol. 24A, pp. 2217–24.10.1007/BF02648596 ↗
31. K. Cho, S. Lee, J. Duffy, and S.R. Nutt: Acta Metall., 1993, vol. 41, pp. 923–32.10.1016/0956-7151(93)90026-O ↗
32. J.W. Huchinson: Scripta Metall., 1984, vol. 18, pp. 421–58.10.1016/0036-9748(84)90414-9 ↗
33. H.C. Rogers: Ann. Rev. Mater. Sci., 1979, vol. 9, pp. 283–311.10.1146/annurev.ms.09.080179.001435 ↗
34. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161–75.10.1007/BF02698247 ↗
35. C.G. Lee, Y.J. Lee, and S. Lee: Scripta Metall., 1995, vol. 32, pp. 821–26.10.1016/0956-716X(95)93208-L ↗
36. D.-G. Lee, S. Kim, S. Lee, and C.S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 315–24.10.1007/s11661-001-0263-y ↗