Effects of indium on the mechanical properties of ternary Sn-In-Ag solders
Source abstract
Abstract
The effects of indium on the mechanical properties of ternary Sn-In-Ag solders have been reported by using tensile tests at various homologous temperatures in this study. Indium depresses the melting temperature of Sn-3.5Ag solder. However, a hard In-rich phase was formed when the indium content was raised to 15 pct, which affected the ultimate tensile strengths (UTSs) and elongation of the ternary Sn-In-Ag alloys. Their UTSs increased, but the elongation decreased by increasing the indium content. While raising the homologous temperature to η=0.796, the apparent activation energy for creep of a Sn-10In-2.8Ag alloy was about 26.9 kJ/mol. Two kinds of plastic-flow mechanisms controlled the Sn-20In-2.8Ag alloy deformation under various homologous temperature ranges. A typical intergranular creep-fracture mode was observed in the Sn-10In-2.8Ag solder. However, a dimple structure with flat plate-like facets of In-rich phase was found on the fractured surfaces of Sn-15(20)In-2.8Ag solders, which indicated that an initial crack had nucleated locally at the In-rich/γ-matrix interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. S.K. Kang and A.K. Sarkhel: J. Electron. Mater., 1994, vol. 23 (8), pp. 701–07.10.1007/BF02651362 ↗
2. J. Glazer: Int. Mater. Rev., 1995, vol. 40 (2), pp. 65–93.10.1179/imr.1995.40.2.65 ↗
3. M. Harada and R. Satoh: IEEE Trans. Comp. Hybrids Man. Technol., 1990, vol. 13 (4), pp. 736–42.10.1109/33.62587 ↗
4. H. Mavoori, J. Chin, S. Vaynman, B. Moran, L. Keer, and M. Fine: J. Electron. Mater., 1997, vol. 26 (7), pp. 783–90.10.1007/s11664-997-0252-z ↗
5. M. McCormack and S. Jin: J. Electron. Mater., 1994, vol. 23 (7), pp. 635–40.10.1007/BF02653349 ↗
6. M. McCormack and S. Jin: J. Electron. Mater., 1994, vol. 23 (8), pp. 715–20.10.1007/BF02651364 ↗
7. Y. Kariya and M. Otsuka: J. Electron. Mater., 1998, vol. 27 (11), pp. 1229–35.10.1007/s11664-998-0074-7 ↗
8. K. Shimizu, T. Nakanishi, K. Karasawa, K. Hashimoto, and K. Niwa: J. Electron. Mater., 1995, vol. 24 (1), pp. 39–45.10.1007/BF02659725 ↗
9. G. Humpston and D.M. Jacobson: Principles of Soldering and Brazing, 1st ed., ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 31–70.
10. E.P. Wood and K.L. Nimmo: J. Electron. Mater., 1994, vol. 23 (8), pp. 709–13.10.1007/BF02651363 ↗