journal article·2011-12

Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments

J. R. McDermid, H. S. Zurob, Y. Bian

Publisher page

Abstract

Two galvanizable high-Al, low-Si transformation-induced plasticity (TRIP)–assisted steels were subjected to isothermal bainitic transformation (IBT) temperatures compatible with the continuous galvanizing (CGL) process and the kinetics of the retained austenite (RA) to martensite transformation during room temperature deformation studied as a function of heat treatment parameters. It was determined that there was a direct relationship between the rate of strain-induced transformation and optimal mechanical properties, with more gradual transformation rates being favored. The RA to martensite transformation kinetics were successfully modeled using two methodologies: (1) the strain-based model of Olsen and Cohen and (2) a simple relationship with the normalized flow stress, $$ \left( {{\frac{{\sigma_{\text{flow}} - \sigmaYS }}{{\sigmaYS }}}} \right) $$ . For the strain-based model, it was determined that the model parameters were a strong function of strain and alloy thermal processing history and a weak function of alloy chemistry. It was verified that the strain-based model in the present work agrees well with those derived by previous workers using TRIP-assisted steels of similar composition. It was further determined that the RA to martensite transformation kinetics for all alloys and heat treatments could be described using a simple model vs the normalized flow stress, indicating that the RA to martensite transformation is stress-induced rather than strain-induced for temperatures above the $$ Ms\sigma $$ .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. P.J. Jacques: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 259–65.10.1016/j.cossms.2004.09.006 ↗
2. J. Van Slycken, P. Verleysen, J. Dergrieck, J. Bouquerel, and B.C. De Cooman: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 516–24.10.1016/j.msea.2007.01.075 ↗
3. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
4. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–9.10.2355/isijinternational1966.27.570 ↗
5. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
6. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–74.10.2355/isijinternational.41.1068 ↗
7. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
8. J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–31.10.1179/026708303225009300 ↗
9. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
10. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
11. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2505–09.
12. M. De Mayer, D. Vanderschueren, and B.C. De Cooman: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (8), pp. 813–22.10.2355/isijinternational.39.813 ↗
13. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
14. E.M. Bellhouse and J.R. McDermid: MS&T’10 Conf. Proc.: Advancements in Processing and Properties of Zinc-Coated Advanced High Strength Steels, Houston, TX, Oct. 2010, pp. 1257–68.
15. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, in press. doi:10.1007/s11661-011-0685-0.10.1007/s11661-011-0685-0 ↗
16. E.M. Bellhouse, A.I.M. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463 (1–2), pp. 147–56.10.1016/j.msea.2006.09.117 ↗
17. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
18. A. Pichler, S. Traint, G. Arnolder, P. Stiaszny, M. Blaimschein, and E. A. Werner: Iron Steelmaker, 2003, vol. 30, pp. 21–31.
19. S.C. Baik, S. Kim, Y.S. Jin, and O. Kwon: ISIJ Int., 2001, vol. 41, pp. 290–97.10.2355/isijinternational.41.290 ↗
20. H. Matsuda, F. Kitano, K. Hasegawa, T. Urabe, and Y. Hosoya: Steel Res., 2002, vol. 73, pp. 211–17.10.1002/srin.200200199 ↗
21. A. Mertens and J. McDermid: Materials Science & Technology 2005—Developments in Sheet Products for Automotive Applications, Pittsburgh, PA, Sept. 25–28, 2005, Association for Iron and Steel Technology, Warrendale, PA, 2005, pp. 199–210.
22. J. McDermid, S. Dionne, O. Dremailova, B. Voyzelle, E. Essadiqi, E. Baril, and F. Goodwin: 2005 SAE World Congr., Society for Automotive Engineers, Detroit, MI, 2005, paper no. 2005-01-0495.
23. ASTM Standard E 8M–01ε2, Standard Test Methods for Tension Testing of Metallic Materials [Metric], ASTM International, West Conshocken, PA, 2001.
24. A.K. Sachdev: Acta Metall., 1983, vol. 31, pp. 2037–42.10.1016/0001-6160(83)90021-4 ↗
25. P.J. Jacques, E. Girault, P. Harlet, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061–67.10.2355/isijinternational.41.1061 ↗
26. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Phil. Mag. A, 2001, vol. 81, pp. 1789–1812.10.1080/01418610108216637 ↗
27. P. Jacques, X. Cornet, P. Harlet, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
28. F.G. Caballero, C. Garcia-Mateo, J. Chao, M.J. Santofimia, C. Capdevila, and C.G. de Andres: ISIJ Int., 2008, vol. 9, pp. 1256–62.10.2355/isijinternational.48.1256 ↗
29. H. Matsuda, H. Noro, Y. Nagataki, and Y. Hosoya: Mater. Sci. Forum, 2010, vols. 638–642, pp. 3374–79.10.4028/www.scientific.net/MSF.638-642.3374 ↗
30. E. Girault, P. Jacques, P. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, and F. Delannay: Mater. Characterization, 1998, vol. 40, pp. 111–18.10.1016/S1044-5803(97)00154-X ↗
31. R. Ruhl and M. Cohen: Trans. TMS-AIME, 1969, vol. 245, pp. 241–51.
32. D. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, p. 469.
33. Y. Tomata, H. Tokuda, Y. Adaschi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater.,2004, vol. 52, pp. 5735–45.
34. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6, pp. 791–95.10.1007/BF02672301 ↗
35. P.J. Jacques, J. Ladriere, and F. Delannay: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2759–68.10.1007/s11661-001-1027-4 ↗
36. B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2331–41.10.1007/s11661-006-0213-9 ↗
37. L. Samek, E. De Moor, J. Penning, and B.C. De Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–24.10.1007/s11661-006-0157-0 ↗
38. A. Mertens, P.J. Jacques, L. Zhao, S.O. Kruijver, J. Sietsma, and F. Delannay: J. Phys. IV JP, 2003, vol. 112, pp. 305–08.
39. N. Tsuchida and Y. Tomota: Mater. Sci. Eng. A, 2000, vol. 285, pp. 345–52.
40. K. Sugimoto, M. Kobayashi, and S. Hashimoto: Metall. Trans. A, 1992, vol. 23A, pp. 3085–91.10.1007/BF02646127 ↗
41. T. Angle: J. Iron Steel Inst., 1954, vol. 177, pp. 165–74.
42. D.C. Ludwigson and J.A. Berger: J. Iron Steel Inst., 1969, vol. 207, pp. 63–69.
43. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–53.10.1179/030634582790427316 ↗
44. T. Suzuki, H. Kojima, K. Suzuki, T. Hashimoto, and I. Ichihara: Acta Metall., 1978, vol. 16, pp. 1151–62.
45. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗