Room-temperature tensile and high-cycle-fatigue strength of fine TiB particulate-reinforced Ti-22Al-27Nb composites
Source abstract
Abstract
To further improve the mechanical properties of a Ti-22Al-27Nb (mol pct) alloy, based on the ordered orthorhombic Ti2AlNb (O phase), a TiB particulate-reinforced Ti-22Al-27Nb matrix composite was prepared using the gas-atomized powder metallurgy method. Because of the rapid solidification during the gas atomization process, the TiB particulates dispersed in the composite were extremely fine, with an average diameter of less than 1 µm and lengths ranging up to 5 µm. This composite (PM composite) showed higher tensile and high-cycle-fatigue properties at room temperature than both an unreinforced Ti-22Al-27Nb matrix alloy and a Ti-22Al-27Nb/TiB composite produced using a conventional ingot metallurgy method (IM composite) with relatively coarse (average diameter 5 µm and average length 40 µm) TiB particulates. These coarse TiB particulates in the IM composite were thought to provide only classical composite strengthening effects. On the other hand, the fine TiB particulates in the PM composite showed additional effects, such as blocking the movement of dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. D. Banerjee, A.K. Gogia, T.K. Nandy, and V.A. Joshi: Acta Metall., 1988, vol. 36, pp. 871–82.10.1016/0001-6160(88)90141-1 ↗
2. K. Muraleedharan, T.K. Nandy, D. Banerjee, and S. Lele: Intermetallics, 1995, vol. 3, pp. 187–99.10.1016/0966-9795(95)98930-7 ↗
3. R.G. Rowe: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 387–98.
4. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305–23.10.1007/s11661-999-0240-4 ↗
5. J. Kumpfert and C. Leyens: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 895–904.
6. J. Kumpfert and W.A. Kaysser: Z. Metallkd., 2001, vol. 92, pp. 128–33.
7. R.G. Rowe, D.G. Konitzer, A.P. Woodfield, and J.C. Chesnutt: in High Temperature Aluminides & Intermetallics IV, L.A. Johnson, D.P. Pope, and J.O. Stiegler, eds., MRS, Pittsburgh, PA, 1991, pp. 703–08.
8. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 795–804.
9. S. Emura and M. Hagiwara: in Titanium ’99 Science and Technology, I.V. Gorynin and S.S. Ushkov, eds., CRISM “Prometey”, St. Petersburg, 2000, pp. 298–305.
10. T. Saito, T. Furuta, and T. Yamaguchi: in Metallurgy and Technology of Practical Titanium Alloys, S. Fujishiro, D. Eylon, and T. Kishi, eds., TMS, Warrendale, PA, 1994, pp. 351–62.
11. Z. Fan, A.P. Miodownik, L. Chandrasekaran, and M. Ward-Close: J. Mater. Sci., 1994, vol. 29, pp. 1127–34.10.1007/BF00351442 ↗
12. T. Saito, H. Takamiya, and T. Furuta: Mater. Sci. Eng. A, 1998, vol. A243, pp. 273–78.10.1016/S0921-5093(97)00813-7 ↗
13. E. Zhang, Y. Jin, H. Wang, and S. Zeng: J. Mater. Sci., 2002, vol. 37, pp. 1861–67.10.1023/A:1014943100257 ↗
14. M. Hagiwara, N. Arimoto, S. Emura, Y. Kawabe, and H.G. Suzuki: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 909–16.10.2355/isijinternational.32.909 ↗
15. M. Hagiwara, S. Emura, Y. Kawabe, and S.J. Kim: in Light Weight Alloys for Aerospace Applications IV, E.W. Lee, W.E. Frazier, N.J. Kim, and K. Jata, eds., TMS, Warrendale, PA, 1997, pp. 219–26.
16. S. Emura, M. Hagiwara, and Y. Kawabe: in Titanium ’95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The Institute of Materials, London, 1995, pp. 2795–802.
17. F. Tang, S. Emura, and M. Hagiwara: Scripta Mater., 2000, vol. 43, pp. 573–78.10.1016/S1359-6462(00)00435-8 ↗
18. W. Voight: Wied. Ann., 1889, vol. 38, pp. 573–87.10.1002/andp.18892741206 ↗
19. M.R. Piggot: Load-Bearing Fibre Composites, Pergamon Press, Oxford, United Kingdom, 1980.
20. S. Emura and M. Hagiwara: Int. J. Mater. Product Technol., 2001, vol. 16, pp. 103–08.10.1504/IJMPT.2001.005401 ↗
21. J.R. Hague, J.F. Lynch, A. Rudnick, F.C. Holden, and W.H. Duckworth: Refractory Ceramics for Aerospace—A Materials Selection Handbook, American Ceramic Society, Columbus, OH, 1964, p. 53.
22. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1–16.
23. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1–23.10.1179/imr.1994.39.1.1 ↗
24. M. Taya and R.J. Arsenault: Metal Matrix Composites, 1st ed., Pergamon Press, Oxford, United Kingdom, 1989, p. 51.
25. T. Saito, T. Furuta, and T. Yamaguchi: in Recent Advances in Titanium Metal Matrix Composites, F.H. Froes and J. Storer, eds., TMS, Warrendale, PA, 1995, pp. 33–44.
26. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
27. P.M. Kelly: Int. Metall. Rev., 1973, vol. 18, p. 31.10.1179/imr.1973.18.1.31 ↗
28. F. Chu, T.E. Mitchell, B. Majumdar, D. Miracle, T.K. Nandy, and D. Banerjee: Intermetallics, 1997, vol. 5, pp. 147–56.10.1016/S0966-9795(96)00075-1 ↗
29. T.K. Nandy and D. Banerjee: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 777–86.
30. S. Emura, A. Araoka, and M. Hagiwara: Scripta Mater., 2003, vol. 48, pp. 629–34.10.1016/S1359-6462(02)00462-1 ↗
31. D. Eylon and J.A. Hall: Metall. Trans. A, 1977, 8A, pp. 981–90.10.1007/BF02661583 ↗
32. S. Emura and M. Hagiwara: 10th Iketani Conf. on Materials Research Toward 21st Century, Karuizawa, 2000.
33. M. Taya and R.J. Arsenault: Metal Matrix Composites, 1st ed., Pergamon Press, Oxford, United Kingdom, 1989, p. 42.