The effect of grain refining on macrosegregation and dendrite arm spacing of direct chill cast AA5182
Source abstract
Abstract
The effect of titanium and titanium diboride inoculation on the spatial variation of local solidification time for direct chill (DC) cast ingots of aluminum alloy 5182 (AA5182) was studied. The results have been compared to those of an ingot cast without grain refining. To accomplish this, the effect of grain refining on a number of ingot characteristics such as grain size, macrosegregation, spatial variation of dendrite arm spacing, and thermal conductivity was investigated. Furthermore, the effect of grain refining on the well-known relationship between dendrite arm spacing and local solidification time had to be established for AA5182. The results indicated that the spatial variation of dendrite arm spacing in the industrial ingots was independent of grain refining, although the nonrefined ingot produced significantly finer dendrite arm spacings in its center. This was attributed to the influence of showering crystals in the nonrefined ingot. The relationship between dendrite arm spacing and local solidification time was also found to be independent of grain refining.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. R.W.K. Honeycombe: The Plastic Deformation of Metals, 2nd ed., Edward Arnold, London, 1984, pp. 236–7.
2. L. Arnberg, L. Bäckerud, and G. Chai: Solidification Characteristics of Aluminum Alloys, vol. 3, Dendrite Coherency, S.P. Thomas, ed., American Foundrymen’s Society, Des Plaines, IL, 1996, pp. 231–2.
3. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 255–6, p. 148.
4. B. Gariepy and Y. Caron: Light Metals, TMS, Warrendale, PA, 1991, pp. 961–71.
5. T.Z. Kattamis, J.C. Coughlin, and M.C. Flemings: Trans. TMS-AIME, 1967, vol. 239, pp. 1504–11.
6. D.H. Kirkwood: Mater. Sci. Eng., 1985, vol. 73, pp. L1-L4.10.1016/0025-5416(85)90319-2 ↗
7. A.W.D. Hills: Proc. 1st Eur. Conf. on Advanced Materials and Processes, DGM Informationsgesellschaft, Oberursel, FGR, 1989, pp. 75–86.
8. A. Mortensen: Metall. Trans. A, 1991, vol. 22A, pp. 569–74.10.1007/BF02656824 ↗
9. U. Feurer and R. Wunderlin: Cited by W. Kurz and D.J. Fisher: Fundamentals of Solidification, 4th rev ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1998, p. 85.
10. T.F. Bower, H.D. Brody, and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 624–34.
11. T.Z. Kattamis and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 1523–32.
12. P.K. Rohatgi and C.M. Adams, Jr.: Trans. TMS-AIME, 1967, vol. 239, pp. 1737–46.
13. K.P. Young and D.H. Kirkwood: Metall. Trans. A, 1975, vol. 6A, pp. 197–205.10.1007/BF02673688 ↗
14. Y. Miyata, T. Suzuki, and J.-I. Uno: Metall. Trans. A, 1985, vol. 16A, pp. 1799–805.10.1007/BF02670367 ↗
15. M. Bamberger, B.Z. Weiss, and M.M. Stupel: Mater. Sci. Technol., 1987, vol. 3, pp. 49–56.10.1179/mst.1987.3.1.49 ↗
16. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 4th rev. ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1998.
17. C.A. Muojekwu, I.V. Samarasekera, and J.K. Brimacombe: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 361–82.10.1007/BF02660979 ↗
18. M. Kahlweit: Scripta Metall., 1968, vol. 2, pp. 251–54.10.1016/0036-9748(68)90115-4 ↗
19. L. Bäckerud, E. Król, and J. Tamminen: Solidification Characteristics of Aluminium Alloys, vol. 1, Wrought Alloys, Scanaluminium, Oslo, Norway, 1986, pp. 119–23.
20. M. Rappaz and V. Voller: Metall. Trans. A., 1990, vol. 21A, pp. 749–53.10.1007/BF02671947 ↗
21. S. Sundarraj and V.R. Voller: Int. Comm. Heat Mass Transfer, 1994, vol. 21 (2), pp. 189–97.10.1016/0735-1933(94)90017-5 ↗
22. H. Combeau, J.-M. Drezet, A. Mo, and M. Rappaz: Metall. Mater. Trans. A., 1996, vol. 27A, pp. 2314–27.10.1007/BF02651886 ↗
23. A. Mo and H.J. Thevik: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 2189–94.10.1007/s11661-998-0043-z ↗
24. J.H. Chen and H.L. Tsai: Int. J. Heat Mass Transfer, 1993, vol. 36 (12), pp. 3069–75.10.1016/0017-9310(93)90035-5 ↗
25. V.R. Voller and S. Sundarraj: Int. J. Heat Mass Transfer, 1995, vol. 38 (6), pp. 1009–18.10.1016/0017-9310(94)00221-G ↗
26. H. Yu and D.A. Granger: Aluminum Alloys, Their Physical and Mechanical Properties, Int. Conf. University of Virginia, Charlottesville, VA, June 1986, E.A. Starke, Jr. and T.H. Sanders, Jr., eds., Engineering Materials Advisory Services, Ltd., Cradley Heath, West Midlands, U.K., 1986, vol. 1, pp. 17–29.
27. M.G. Chu and J.E. Jacoby: Light Metals, TMS, 1990, pp. 925–30.
28. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth Warrendale, PA, and Co., London, 1976, p. 59.
29. Aluminum, vol. 1, Properties, Physical Metallurgy and Phase Diagrams, K.R. van Horn, ed., ASM, Metals Park, OH, 1967, p. 173.
30. N.W. Ashcroft and N.D. Mermin: Solid State Physics, Holt-Saunders International, New York, NY, 1976, p. 52.
31. ASM Specialty Handbook, Aluminum and Aluminum Alloys, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 672–83 and 727–29.
32. A.V. Logunov and A.F. Zverev: J. Eng. Phys. (translated from Inz-Fiz Z.), 1968, vol. 15 (6), pp. 1256–60.10.1007/BF00828955 ↗
33. P.B. Farnsworth: Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1986, vol. 10, pp. 21–30.
34. J.E. Hilliard: Metal Progr., 1964, May, pp. 99–102.
35. A. Mortensen: Metall. Trans. A, 1989, vol. 20A, pp. 247–53.10.1007/BF02670250 ↗
36. J. Hutt and D. St John: Int. J. Cast Met. Res., 1998, vol. 11 (1), pp. 13–22.10.1080/13640461.1998.11819254 ↗
37. K.A. Jackson, J.D. Hunt, D.R. Uhlmann, and T.P. Seward (III): Trans. TMS-AIME., 1966, vol. 236, pp. 149–58.
38. J.F. Grandfield and P.T. McGlade: Mater. Forum, 1996, vol. 20, pp. 29–51.