Role of Chemical Driving Force in Martensitic Transformations of High-Purity Fe-Cr-Ni Alloys
Source abstract
Abstract
The main objective of the present work is to point out the respective roles of chemical driving force and stacking fault energy (SFE) in the occurrence of martensitic transformations in high-purity Fe-Cr-Ni alloys. For this purpose, the transmission electron microscope (TEM), X-ray diffractometer, thermal differential microanalyzer (TDA), and tension test were employed to report M s temperatures, austenite stacking fault energies, and driving forces for the concerned alloys. It was observed that the martensitic transformations in the studied alloys occur through the γ → e → α′ steps. As a remarkable result, it was shown that a low SFE, if necessary to e-phase nucleation, is not a sufficient condition for nucleation of α′ phase. In fact, the formation of stable α′ nuclei from α′ embryos occur if the required chemical driving force is provided. Also, an equation was proposed for the kinetics of spontaneous martensitic transformation as a function of driving force.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill, New York, NY, 1981, pp. 256–61.
2. R.P. Reed: Acta Metall., 1962, vol. 10, pp. 865–77.10.1016/0001-6160(62)90101-3 ↗
3. J.W. Brooks, M.H. Loretto, and R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1829–38.10.1016/0001-6160(79)90073-7 ↗
4. J.W. Brooks, M.H. Loretto, and R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1839–47.10.1016/0001-6160(79)90074-9 ↗
5. L.E. Murr and K.P. Staudhammer: Metall. Trans. A, 1982, vol. 13A, pp. 627–35.10.1007/BF02644428 ↗
6. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29 (10), pp. 868–77.10.2355/isijinternational.29.868 ↗
7. A. Dasa, S. Sivaprasad, M. Ghosha, P.C. Chakraborti, and S. Tarafder: Mater. Sci. Eng. A, 2008, vol. 486, pp. 283–86.10.1016/j.msea.2007.09.005 ↗
8. T.S. Byun, N. Hashimoto, and K. Farrell: Acta Mater., 2004, vol. 52, pp. 3889–99.10.1016/j.actamat.2004.05.003 ↗
9. J. Talonen, P. Nenonen, G. Pape, and H. Hänninen: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 421–32.10.1007/s11661-005-0313-y ↗
10. H. Fujita and S. Ueda: Acta Metall., 1972, vol. 20, pp. 759–67.10.1016/0001-6160(72)90104-6 ↗
11. T. Suzuki, H. Kijima, K. Suzuki, T. Hashimoto, and M. Ichihara: Acta Metall., 1974, vol. 25, pp. 1151–62.10.1016/0001-6160(77)90202-4 ↗
12. A. Sato, H. Kasuga, and T. Mori: Acta Metall., 1980, vol. 88, pp. 1223–28.10.1016/0001-6160(80)90077-2 ↗
13. Q.X. Dai, X.N. Cheng, X.M. Luo, and Y.T. Zhao: Mater. Charact., 2003, vol. 49, pp. 367–71.10.1016/S1044-5803(03)00035-4 ↗
14. Q.X. Dai, X.N. Cheng, Y.T. Zhao, X.M. Luo, and Z.Z. Yuan: Mater. Charact., 2004, vol. 52, pp. 349–54.10.1016/j.matchar.2004.06.008 ↗
15. K. Datta, R. Delhez, P.M. Bronsveld, J. Beyer, H.J.M. Geijselaers, and J. Post: Acta Mater., 2009, vol. 57, pp. 3321–26.10.1016/j.actamat.2009.03.039 ↗
16. M.R. Rochaa and C.A.S. Oliveira: Mater. Sci. Eng. A, 2009, vol. 517, pp. 281–85.10.1016/j.msea.2009.04.004 ↗
17. I. Mészáros and J. Prohászka: J. Mater. Proc. Technol., 2005, vol. 161, pp. 162–68.10.1016/j.jmatprotec.2004.07.020 ↗
18. J.A. Lichtenfeld, M.C. Mataya, and C.J.V. Tyne: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 147–61.10.1007/s11661-006-0160-5 ↗
19. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
20. K. Mumtaz, S. Takahashi, J. Echigoya, L. Zhang, Y. Kamada, and M. Sato: J. Mater. Sci. Lett., 2003, vol. 22, pp. 423–27.10.1023/A:1022999309138 ↗
21. K. Tomimura, S. Takaki, S. Tanimoto, and Y. Tokunaga: ISIJ Int., 1991, vol. 31 (7), pp. 721–27.10.2355/isijinternational.31.721 ↗
22. G. Thomas: Transmission Electron Microscopy of Metals, 3rd ed., John Wiley & Sons, New York, NY, 1966, ch. 3.
23. R.E. Smallman and P.S. Dobson: Metall. Trans., 1970, vol. 1, pp. 2383–89.10.1007/BF03038367 ↗
24. R.P.I. Adler, H.M. Otte, and C.N.J. Wagner: Metall. Trans., 1970, vol. 1, pp. 2375–82.10.1007/BF03038366 ↗
25. E.H. Köster, A.R. Thölén, and A. Howie: Phil. Mag., 1964, vol. 10A, pp. 1093–95.10.1080/14786436408225417 ↗
26. A.W. Ruff: Metall. Trans., 1970, vol. 1, pp. 2391–413.10.1007/BF03038368 ↗
27. L.M. Brown and A.R. Thölén: Disc. Faraday Soc., 1964, vol. 38, pp. 35–41.10.1039/df9643800035 ↗
28. B. Thomas: J. Microsc. Spectrosc. Electron., 1976, vol. 1, pp. 623–36.
29. P.J. Ferriera and P. Muéllner: Acta Mater., 1998, vol. 46 (13), pp. 4479–84.10.1016/S1359-6454(98)00155-4 ↗
30. A. Najafizadeh: Ph.D. Thesis, Université Paris VI, Paris, France, 1980.
31. L. Kaufman: Trans. Met. Soc., 1959, vol. 215, pp. 218–27.
32. J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359–71.10.1007/BF02814874 ↗
33. A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
34. L. Kaufman: “Annual Report on Computer Based Method for Thermodynamic Analysis of Materials Processing,” Manlabs, Inc., Cambridge, MA, 1981, pp. 1–79.
35. A.P. Miodownik: CALPHAD, 1978, vol. 2, pp. 207–26.10.1016/0364-5916(78)90010-X ↗
36. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95.10.1007/BF02672301 ↗
37. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42 (10), pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
38. T. Narutani, G.B. Olson, and M. Cohen: J. Phys., 1982, vol. 43, pp. 429–34.