Deformation Substructures and Their Transitions in Laser Shock–Compressed Copper-Aluminum Alloys
Source abstract
Abstract
It is shown that the short pulse durations (0.1 to 10 ns) in laser shock compression ensure a rapid decay of the pulse and quenching of the shocked sample in times that are orders of magnitude lower than in conventional explosively driven plate impact experiments. Thus, laser compression, by virtue of a much more rapid cooling, enables the retention of a deformation structure closer to the one existing during shock. The smaller pulse length also decreases the propensity for localization. Copper and copper aluminum (2 and 6 wt pct Al) with orientations [001] and $$ [\ifmmode\expandafter\bar\else\expandafter\=\fi{1}34] $$ were subjected to high intensity laser pulses with energy levels of 70 to 300 J delivered in an initial pulse duration of approximately 3 ns. The [001] and $$ [\ifmmode\expandafter\bar\else\expandafter\=\fi{1}34] $$ orientations were chosen, because they respectively maximize and minimize the number of slip systems with highest resolved shear stresses. Systematic differences of the defect substructure were observed as a function of pressure, stacking-fault energy, and crystalline orientation. The changes in the mechanical properties for each condition were compared using micro- and nanohardness measurements and correlated well with observations of the defect substructure. Three regimes of plastic deformation were identified and their transitions modeled: dislocation cells, stacking faults, and twins. An existing constitutive description of the slip to twinning transition, based on the critical shear stress, was expanded to incorporate the effect of stacking-fault energy. A new physically based criterion accounting for stacking-fault energy was developed that describes the transition from perfect loop to partial loop homogeneous nucleation, and consequently from cells to stacking faults. These calculations predict transitions that are in qualitative agreement with the effect of SFE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. S.C. Smith: Trans. AIME, 1958, vol. 212, pp. 574–78
2. B.Y. Cao, D.H. Lassila, M.S. Schneider, B.K. Kad, C.X. Huang, Y.B. Xu, D.H. Kalantar, B.A. Remington, M.A. Meyers: Mater. Sci. Eng. A, 2005, vol. 409, pp. 270–8110.1016/j.msea.2005.06.076 ↗
3. M.S. Schneider, B.K. Kad, D.H. Kalantar, B.A. Remington, M.A. Meyers: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2633–4610.1007/s11661-004-0209-2 ↗
4. M.S. Schneider, B.K. Kad, D.H. Kalantar, B.A. Remington, E. Kenik, H. Jarmakani, M.A. Meyers: IJIE, 2005, vol. 32, pp. 473–507
5. J.M. McNaney, M.J. Edwards, R. Becker, K.T. Lorenz, B.A. Remington: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2625–3110.1007/s11661-004-0208-3 ↗
6. G.A. Askaryon, E.M. Morez: JETP Lett., 1963, vol. 16, p. 1638
7. R.M. White: J. Appl. Phys., 1963, vol. 34, pp. 2123–2410.1063/1.1729762 ↗
8. C.E. Bell, J.A. Landt: Appl. Phys. Lett., 1967, vol. 10, pp. 46–4810.1063/1.1754840 ↗
9. E. Panarella, P. Savic: Can. J. Phys., 1968, vol. 46, pp. 182–9210.1139/p68-027 ↗
10. C.H. Skeen, C.M. York: J. Appl. Lett., 1968, vol. 12, pp. 369–7110.1063/1.1651859 ↗
11. O. Johari, G. Thomas: Appl. Phys. Lett., 1964, vol. 12, pp. 1153–59
12. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley, Reading, MA, 1975, p. 142
13. A. Rohatgi, K.S. Vecchio: Mater. Sci. Eng. A, 2002, vol. A328, pp. 256–6610.1016/S0921-5093(01)01702-6 ↗
14. A. Rohatgi, K.S. Vecchio, G.T. Gray III: Acta Mater., 2001, vol. 49, pp. 427–3810.1016/S1359-6454(00)00335-9 ↗
15. A. Rohatgi, K.S. Vecchio, G.T. Gray III: Metall. Mater. Trans. A, 2001, vol. 135A, pp. 135–4510.1007/s11661-001-0109-7 ↗
16. G.B. Zimmerman, W.L. Kruer: Comm. Plasma Phys. Controlled Fus., 1975, vol. 2, p. 51
17. A.M. Rubenchik, M.D. Feit, M.D. Perry, J.T. Larsen: Appl. Surf. Sci., 1998, vol. 129, pp. 193–9810.1016/S0169-4332(97)00631-4 ↗
18. D.J. Steinberg, S.G. Cochran, M.W. Guinan: J. Appl. Phys., 1980, vol. 51, pp. 1498–50410.1063/1.327799 ↗
19. M.A. Meyers, F. Gregori, B.K. Kad, M.S. Schneider, D.H. Kalantar, B.A. Remington, G. Ravichandran, T. Boehly, J.S. Wark: Acta Metall., 2003, vol. 51, pp. 1211–28
20. L.E. Murr: in Shock Waves and High-Strain-Rate Phenomena in Metals, M.A. Meyers, L.E. Murr, eds., Plenum, New York, NY, 1981, pp. 607–7310.1007/978-1-4613-3219-0_37 ↗
21. B.L. Holian, P.S. Lomdahl: Science, 1998, vol. 280, pp. 2085–8810.1126/science.280.5372.2085 ↗
22. E.M. Bringa, A. Caro, Y. Wang, M. Victoria, J.M. McNaney, B.A. Remington, R.F. Smith, B.R. Torralva, H.V. Swygenhoven: Science, 2005, vol. 309, pp. 1838–4110.1126/science.1116723 ↗
23. L.E. Murr: Scripta Metall., 1978, vol. 12, pp. 201–0610.1016/0036-9748(78)90164-3 ↗
24. A. Rohatgi: Master’s Thesis, University of California, San Diego, 1999
25. P.C.J. Gallagher: Metall. Trans., 1970, vol. 1, p. 242910.1007/BF03038370 ↗
26. O. Vöhringer: Z. Metallkd., 1974, vol. 56, p. 585
27. J.A. Venables: in Deformation Twinning, R.E. Reed-Hill, J.P. Hirth, H.C. Rogers, eds., Gordon and Breach, New York, NY, 1964, p. 77
28. O. Vöhringer: Z. Metallkd., 1972, vol. 11, p. 1119
29. N. Narita, J.-I. Takamura: in Dislocations in Solids, F.R.N. Nabarro, ed., Elsevier, Amsterdam, 1992, vol. 9, p. 1211–12
30. G. Thomas: Acta Metall., 1965, vol. 13, p. 121110.1016/0001-6160(65)90060-X ↗
31. L.E. Murr, M.A. Meyers, C.-S. Niou, Y.-J. Chen, S. Pappu, C. Kennedy: Acta Mater., 1997, vol. 45, pp. 157–7510.1016/S1359-6454(96)00145-0 ↗
32. M.A. Meyers, O. Voehringer, V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–3910.1016/S1359-6454(01)00300-7 ↗
33. J.W. Swegle, D.E. Grady: J. Appl. Phys., 1985, vol. 58, pp. 692–70110.1063/1.336184 ↗
34. F.J. Zerilli, R.W. Armstrong: J. Appl. Phys., 1987, vol. 61, pp. 1816–2510.1063/1.338024 ↗
35. J. Diehl: Z. Metallkd., 1956, vol. 47, pp. 331–41
36. M.A. Meyers: Dynamic Behavior of Materials, J. Wiley, New York, NY, 199410.1002/9780470172278 ↗
37. O. Vöhringer: Z. Metallkd., 1976, vol. 67, p. 51
38. T. Kan, P. Haasen: Mater. Sci. Eng., 1969–70, vol. 5, p. 237
39. R. Labusch: Phys. Status Solidi, 1970, vol. 41, p. 65910.1002/pssb.19700410221 ↗
40. P. Jax, P. Kratochvil, P. Haasen: Acta Metall., 1970, vol. 18, pp. 237–4510.1016/0001-6160(70)90029-5 ↗
41. A. Rohatgi: Ph.D. Thesis, University of California, San Diego, 1999
42. A. Cottrell: Dislocations and Plastic Flow in Crystals, Clarendon Press, Oxford, United Kingdom, 1953, p. 54
43. G. Xu, A.S. Argon: Phil. Mag., 2000, vol. 80. pp. 605–1110.1080/09500830050134318 ↗
44. J.R. Rice: J. Mech. Phys. Sol., 1992, vol. 40, p. 25610.1016/S0022-5096(05)80012-2 ↗
45. M. Khantha, V. Vitek: Acta Mater., 1997, vol. 45, pp. 4675–8610.1016/S1359-6454(97)00128-6 ↗
46. M.A. Meyers: Scripta Mater., 1978, vol. 12, pp. 21–2610.1016/0036-9748(78)90219-3 ↗
47. D. Hull, D.J. Bacon: Introduction to Dislocations, Butterworth-Heinemann, Oxford, United Kingdom, 2001, p. 147
48. D.L. Preston, D.C. Wallace: Solid State Commun., 1992, vol. 81 (3), pp. 277–8110.1016/0038-1098(92)90514-A ↗
49. T.C. Germann, B.L. Holian, P.S. Lomdahl, and R. Ravelo: Phys. Rev. Lett., 2000, vol. 84, pp. 5351–5410.1103/PhysRevLett.84.5351 ↗
50. T.C. Germann, D. Tanguy, B.H. Holian, P.S. Lomdahl, M. Mareschal, R. Ravelo: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2609–1510.1007/s11661-004-0206-5 ↗
51. D. Tanguy, M. Mareschal, P.S. Lomdahl, T.C. Germann, B.L. Holian, R. Ravelo: Phys. Rev. B, 2003, vol. 68, p. 14411110.1103/PhysRevB.68.144111 ↗
52. K. Kadau, T.C. Germann, P.S. Lomdahl, B.L. Holian, D. Kadau, P. Ental, M. Kreth, F. Westerhof, D.E. Wolf: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2719–2310.1007/s11661-004-0217-2 ↗
53. R.J. De Angelis, J.B. Cohen: J. Met., 1963, vol. 15, p. 681