journal article·2002-03

Effects of high rates of loading on the deformation behavior and failure mechanisms of hexagonal close-packed metals and alloys

K. T. Ramesh

Publisher page

Abstract

A substantial amount of work has been performed on the effect of high rates of loading on the deformation and failure of fcc and bcc metals. In contrast, the influence of high strain rates and temperature on the flow stress of hcp metals has received relatively little attention, and the modes of dynamic failure of these materials are poorly characterized. The low symmetry of these materials and the development of twinning lead to a particularly rich set of potential mechanisms for deformation and failure at high rates. This article reviews results of high-strain-rate deformation and dynamic failure studies on hcp metals, with a focus on titanium, Ti-6Al-4V, and hafnium. Strain rates as high as 105 s −1 are considered, and observations of adiabatic shear localization and subsequent failure are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Y.V.R.K. Prasad and R.W. Armstrong: Phil. Mag., 1974, vol. 29, pp. 1421–25.10.1080/14786437408226196 ↗
2. B.J. Koeppel and G. Subhash: Metall. Mater. Trans. A—Phys. Metall. Mater. Sci., 1999, vol. 30 (10), pp. 2641–48.10.1007/s11661-999-0304-5 ↗
3. J.R. Asay, L.C. Chhabildas and J.L. Wise: in Shock Waves in Condensed Matter—1981, W.J. Nellis, L. Seaman, and R.A. Graham, ed., American Institute of Physics, New York, NY, 1982, pp. 427–31.
4. M.D. Bjorkman and J.E. Shrader: in Shock Waves in Condensed Matter—1981, W.J. Nellis, L. Seaman, and R.A. Graham, eds.. American Institute of Physics, New York, NY, 1982, pp. 432–36.
5. W.C. Moss: J. Appl. Phys., 1985, vol. 57, pp. 1665–70.10.1063/1.334434 ↗
6. D.J. Steinberg and R.W. Sharp, Jr.: J. Appl. Phys., 1981, vol. 52, pp. 5072–83.10.1063/1.329458 ↗
7. W.R. Blumenthal, R.W. Carpenter, C.P. Trujillo, S.P. Abeln, and G.T. Gray III: APS Shock Physics, 1997.
8. D. Montoya, G. Naulin and J.P. Ansart: J. Phys. IV, 1991, vol. 1 (C3), pp. 27–34.
9. A.E. Abey and H.D. Stromberg: Trans. ASME: J. Basic Eng., 1971, vol. 93, pp. 1291–95.
10. T. Nicholas: Air Force Materials Laboratory, Dayton, OH: personal communication, 2001.
11. G. Subhash: JOM-J. Miner. Met. Mater. Soc., 1995, vol. 47 (5), pp. 55–58.10.1007/BF03221179 ↗
12. M.A. Meyers. Dynamic Behavior of Materials, Wiley Interscience, New York, NY, 1994.10.1002/9780470172278 ↗
13. K.T. Ramesh and S. Narasimhan: Int. J. Solids Struct., 1996, vol. 33 (25), pp. 3723–38.10.1016/0020-7683(95)00206-5 ↗
14. D. Jia and K. T. Ramesh: unpublished research, 2001.
15. S. Yadav: Master’s Thesis, The Joyns Hopkins University, Baltimore, MD, 1994.
16. D.R. Chichili, K.T. Ramesh and K.J. Hemker: Acta Mater, 1998, vol. 46 (3), pp. 1025–43.10.1016/S1359-6454(97)00287-5 ↗
17. E.A. Anderson, D.C. Jillson, and S.R. Dunbar: J. Met., 1953, p. 1191.
18. F.D. Rosi, C.A. Dube, and B.H. Alexander: J. Met., 1953, p. 257.
19. F.D. Rosi: J. Met., 1954, p. 58.10.1007/BF03397981 ↗
20. F.D. Rosi, F.C. Perkins, and L.L. Siegle Trans. AIME, 1956, p. 115.10.1007/BF03377654 ↗
21. U.F. Kocks and D.G. Westlake: Trans. TMS-AIME, 1967, vol. 239, pp. 1967–1107.
22. P.G. Partridge: Metall. Rev., 1967, p. 169.10.1179/095066067790138184 ↗
23. D.G. Westlake: Trans. TMS-AIME, 1967, vol. 239, p. 1101.
24. A.G. Crocker and M. Bevis: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, London, 1968.
25. H. Conrad and R. Jones, in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds, Pergamon Press, London, 1968.
26. K. Okazaki and H. Conrac: Acta Metall, 1973, vol. 21, pp. 1117–29.10.1016/0001-6160(73)90028-X ↗
27. V., Ramachandran, A.T. Santhanam and R.E. Reed-Hill: Ind. J. Technol., 1973, vol. 11, pp. 485–92.
28. T.S. DeSisto: in High Speed Testing I, A.G.H. Dietz and F.R. Eirich, eds, Interscience, New York, NY, 1960, pp. 97–106.
29. H. Conrad: Acta Metall., 1966, vol. 14, p. 1631.10.1016/0001-6160(66)90186-6 ↗
30. R.N. Orava, G. Stone and H. Conrad: Trans. Am. Soc. Met., 1966, vol. 59, pp. 171–84.
31. A.T. Santhanam, V. Ramachandran and R.E. Reed-Hill: Metall. Trans., 1970, vol. 1, pp. 2593–98.10.1007/BF03038389 ↗
32. T. Tanaka and H. Conrad: Acta Metall., 1972, vol. 20, p. 1019.10.1016/0001-6160(72)90136-8 ↗
33. S.P. Agrawal, G.A. Sargent and H. Conrad: Metall. Trans. A, 1973, vol. 4, p. 2613.10.1007/BF02644265 ↗
34. B. de Meester, M. Doner, and H. Conrad: Z. Metallkd, 1973, p. 775,10.1515/ijmr-1973-641106 ↗
35. K. Okazaki, T. Odawara and H. Conrad: Scripta Metall, 1977, vol. 11, p. 437.10.1016/0036-9748(77)90151-X ↗
36. J.C.C. Hsu and R.J. Clifton: J. Mech. Phys. Solids, 1974, vol. 22, pp. 233–53.10.1016/S0022-5096(74)90083-0 ↗
37. J.C.C. Hsu and R.J. Clifton: J. Mech. Phys. Solids, 1974, vol. 22, pp. 255–66.10.1016/S0022-5096(74)90092-1 ↗
38. A. Gilat and R.J. Clifton: J. Mech. Phys. Solids, 1985, vol. 33 (3), pp. 263–84.10.1016/0022-5096(85)90015-8 ↗
39. D.W. Nicholson: in Shock Waves in Condensed Matter—1983, J.R. Asay, R.A. Graham, and G.K. Straub, eds, North-Holland, Amsterdam 1984, pp. 141–44.10.1016/B978-0-444-86904-3.50033-6 ↗
40. G.I. Kanel, S.V. Razorenov and V.E. Fortov, Sov. Phys. Tech. Phys., 1986, vol. 31, pp. 354–55.
41. J.S. Gyanchandani, S.C. Gupta, S.K. Sikka and R. Chidambaram: in Shock Compression of Condensed Matter—1989, S.C. Schmidt, J.N. Johnson, and L.W. Davison, eds, Elsevier, Amsterdam, 1990, pp. 131–34.
42. J. Harding: Arch. Mech., 1975, vol. 27, pp. 715–32.
43. G.L. Wulf: J. Mech. Sci., 1979, vol. 21, pp. 713–18.10.1016/0020-7403(79)90051-1 ↗
44. S. Leclercq, C. Nguy, and P. Bensussan: International Conference on Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conf. Ser. No. 102, Oxford, United Kingdom, 1989.
45. K. Mimura and Y. Tomita, J. Phys. IV, 1991, vol. C3, pp. 813–20.
46. S. Gabelotaud, C. Nguy, P. Bensussan, M. Berveiller, and P. Lipinski: in: Shock-Wave and High-Strain-Rate Phenomena in Materials, M.A. Meyers, L.E. Murr, and K.P. Staudhammer, eds., Marcel Dekker, New York, NY, 1992, pp. 161–70.
47. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Mater. Trans. A, 1993, vol. 24, pp. 2513–20.10.1007/BF02646530 ↗
48. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: The Johannes Weertman Symp., R.J. Arsenault et al. eds., TMS, Warrendale, PA, 1996, pp. 437–48.
49. D.J. Smith and R.L. Jones: Mech. Mater., 1989, vol. 8, pp. 219–35.10.1016/0167-6636(89)90013-6 ↗
50. M.A. Meyers, G. Subhash, B.K. Kad, and L. Prasad: Mech. Mater. 1994, vol. 17, pp. 175–93.10.1016/0167-6636(94)90058-2 ↗
51. Y. Yang, X.-M. Zhang, Z.-H. Li, and Q.-Y. Li: Scripta Metall. Mater., 1995, vol. 33, pp. 219–24.10.1016/0956-716X(95)00151-K ↗
52. S. Yadav and K.T. Ramesh: Mater. Sci. & Eng. A, 1998, vol. 246, pp. 265–81.10.1016/S0921-5093(97)00746-6 ↗
53. G. Subhash, G. Ravichandran, and B.J. Pletka: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1479–87.10.1007/s11661-997-0210-7 ↗
54. R. Hill: The Mathematical Theory of Plasticity, Oxford Science Publications, London, 1989.
55. R.J. Clifton: Trans. ASME: J. Appl. Mech., 1983, vol. 50, pp. 941–52.10.1115/1.3167207 ↗
56. G.C. Kaschner and G.T. Gray III: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2000, vol. 31A (8), pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
57. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1988.
58. C.N. Tome, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
59. H. Conrad, M. Doner, and B. de Meester: in Titanium Science & Technology, R.I. Jaffee and H.M. Burte, eds, Plenum Press, New York, NY, 1973, pp. 969–1005.
60. S. Naka, A. Lasalmonie, P. Costa, and L.P. Kubin: Phil. Mag. A, 1988, vol. 57, pp. 717.10.1080/01418618808209916 ↗
61. S. Naka, L.P. Kubin, and C. Perrier: Phil. Mag. A, 1991, vol. 63 (5), pp. 1035–43.10.1080/01418619108213935 ↗
62. D. Lee: Metall. Trans., 1970, vol. 1 (6), p. 1607.10.1007/BF02642007 ↗
63. S.G. Song and G.T. Gray III: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2665–75.10.1007/BF02669423 ↗
64. L.P. Koshmanov, V.D. Rudnev, O.A. Nechaeva, and N.B. Sokolov: Atom. Energy, 1996, vol. 81 (2), pp. 601–04.10.1007/BF02415664 ↗
65. G.E. Das and T.E. Mitchel: Metall. Trans., 1973, vol. 4, pp. 1405–13.10.1007/BF02644539 ↗
66. A.M. Lennon and K.T. Ramesh: Int. J. Plasticity, 1998, vol. 14 (12) pp. 1279–92.10.1016/S0749-6419(98)00056-4 ↗
67. A.M. Lennon and K.T. Ramesh: Int. J. Plasticity, 2001, in press.
68. A.M. Lennon: Ph.D. Dissetation, The Johns Hopkins University, Baltimore, MD, 1998.
69. Y.L. Bai and B. Dodd: Adiabatic Shear Localization: Occurrence, Theories and Applications, Pergamon, Oxford, United Kingdom, 1992.
70. M.H. Yoo: Metall. Trans. A., 1981, vol. 12A, p. 409.10.1007/BF02648537 ↗
71. M.H. Yoo and J.K. Lee: Phil. Mag. A, 1991, vol. 63 (5), p. 987.10.1080/01418619108213931 ↗
72. S.G. Song and G.T. Gray III: Acta Metall. Mater., 1995, vol. 43, p. 2325.10.1016/0956-7151(94)00433-1 ↗
73. S.G. Song and G.T. Gray III: Acta Metall. Mater., 1995, 43 (6), pp. 2339–50.10.1016/0956-7151(94)00434-X ↗
74. M.H. Yoo, J.R. Morris, K.M. Ho, and S.R. Agnew: Metall Mater. Trans. A, 2002, vol. 33A, pp. 813–22.10.1007/s11661-002-1013-5 ↗
75. L.C. Chhabildas, L.M. Barker, J.R. Asay, and T.G. Trucano: in Shock Compression of Condensed Matter—1989, S.C. Schmidt, J.N. Johnson, and L.W. Davidson, eds., Elsevier, Amsterdam, 1990, pp. 429–32.
76. A. Marchand and J. Duffy: J. Mech. Phys. Solids, 1998, vol. 36 (3), pp. 251–83.10.1016/0022-5096(88)90012-9 ↗
77. M. Zhou, G. Ravichandran, and A.J. Rosakis: J. Mech. Phys. Solids, 1996, vol. 44, pp. 981–1006.10.1016/0022-5096(96)00003-8 ↗
78. L.W. Meyer and S. Manwaring: in Metallurgical Applications of Shock-Ware and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds, Marcel-Dekker, New York, NY, 1986, pp. 657–74.
79. V.F. Nesterenko, M.A. Meyers, and T.W. Wright: in Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Elsevier, Amsterdam, 1995, pp. 397–404.
80. D.R. Chichili and K.T. Ramesh: J. Appl. Mech., 1999, vol. 66, pp. 10–20.10.1115/1.2789137 ↗
81. R.E. Winter: Phil. Mag., 1975, vol. 31, pp. 765–73.10.1080/14786437508229629 ↗
82. H.A. Grebe, H.-R. Pak, and M.A. Meyers: Metall Trans. A., 1985, vol. 16A, pp. 761–75.10.1007/BF02814827 ↗
83. M.A. Mogilevskii, T.O. Sanchaa, and Y.D. Shishkin: J. Appl. Mech. Tech. Phys., 1986, vol. 27, pp. 430–32.10.1007/BF00910527 ↗
84. H.-R. Pak, C.L. Wittman, and M.A. Meyers: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel-Dekker, New York, NY, 1986, pp. 749–60.
85. K.P. Staudhammer and A.J. Gray: Inst. Phys. Conf. Ser. 1989, vol. 102, pp. 111–18.
86. W.H. Holt, W. Mock, W.G. Soper, C.S. Coffey, V. Ramachandran, and R.W. Armstrong: in Shock Waves in Condensed Matter—1989, S.C. Schmidt, J.N. Johnson, and L.W. Davidson, eds., Elsevier, Amsterdam, 1990, pp. 915–18.
87. V.K. Satish, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Trans. A., 1993, vol. 24A, p. 2513.
88. J.Y. Sheikh-Ahmad and J.A. Bailey: Trans. ASME: J. Eng. Mater. Technol., 1995, vol. 117, pp. 225–59.
89. Y. Yang, Z. Xinming, L. Zhenghua and L. Qingyun Acta Mater. 1996, vol. 44, pp. 561–65.10.1016/1359-6454(95)00200-6 ↗
90. D.R. Chichili: Ph.D. Dissertation, The Johns Hopkins University, Baltimore MD, 1997.
91. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: unpublished research, 2001.
92. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: unpublished research, 2001.
93. K.T. Ramesh, S. Yaday, and J.A. Davis: in Tungsten and Tungsten Alloys 1992, A. Bose and R.J. Dowding, Metal Powder Industries Federation, Princeton, NJ, 1993, pp. 299–306.
94. M. da Silva and K.T. Ramesh: Mater. Sci. Eng. A, 1997, vol. 232, pp. 11–22.10.1016/S0921-5093(97)00076-2 ↗
95. A.U. Sulijodikusumo and O.W. Dillon, {jrJr.}: in Metallurgical Effects at High Strain Rates, R.W. Rohde et al., eds. Plenum, New York, NY, 1973, pp. 501–18.10.1007/978-1-4615-8696-8_28 ↗
96. Y. Me-Bar and D. Shechtman: Mater. Sci. Eng. 1983, vol. 58, pp. 181–88.10.1016/0025-5416(83)90044-7 ↗
97. S.P. Timothy: Ph.D. Dissertation, Cambridge University, Cambridge, NY, 1983.
98. S.P. Timothy and I.M. Hutchings Inst. Phys. Conf. Ser., 1984, vol. 70, pp. 397–404.
99. S.P. Timothy and I.M. Hutchings: Proc. 8th. Conf. on High Energy Rate Fabrication, ASME, New York, NY, 1984, pp. 31–40.
100. R.L. Woodward, B.J. Baxter, and N.V.Y. Scarlett, Inst. Phys. Conf. Ser. 1984, vol. 70, pp. 525–32.