journal article·2016-05

Effect of Cr, Ti, V, and Zr Micro-additions on Microstructure and Mechanical Properties of the Al-Si-Cu-Mg Cast Alloy

S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman, D. L. Chen

Publisher page

Abstract

Uniaxial static and cyclic tests were used to assess the role of Cr, Ti, V, and Zr additions on properties of the Al-7Si-1Cu-0.5Mg (wt pct) alloy in as-cast and T6 heat-treated conditions. The microstructure of the as-cast alloy consisted of α-Al, eutectic Si, and Cu-, Mg-, and Fe-rich phases Al2.1Cu, Al8.5Si2.4Cu, Al5.2CuMg4Si5.1, and Al14Si7.1FeMg3.3. In addition, the micro-sized Cr/Zr/Ti/V-rich phases Al10.7SiTi3.6, Al6.7Si1.2TiZr1.8, Al21.4Si3.4Ti4.7VZr1.8, Al18.5Si7.3Cr2.6V, Al7.9Si8.5Cr6.8V4.1Ti, Al6.3Si23.2FeCr9.2V1.6Ti1.3, Al92.2Si16.7Fe7.6Cr8.3V1.8, and Al8.2Si30.1Fe1.6Cr18.8V3.3Ti2.9Zr were present. During solution treatment, Cu-rich phases were completely dissolved, while the eutectic silicon, Fe-, and Cr/Zr/Ti/V-rich intermetallics experienced only partial dissolution. Micro-additions of Cr, Zr, Ti, and V positively affected the alloy strength. The modified alloy in the T6 temper during uniaxial tensile tests exhibited yield strength of 289 MPa and ultimate tensile strength of 342 MPa, being significantly higher than that for the Al-Si-Cu-Mg base. Besides, the cyclic yield stress of the modified alloy in the T6 state increased by 23 pct over that of the base alloy. The fatigue life of the modified alloy was substantially longer than that of the base alloy tested using the same parameters. The role of Cr, Ti, V, and Zr containing phases in controlling the alloy fracture during static and cyclic loading is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. W. Kasprzak, H. Kurita, J. H. Sokolowski and H. Yamagata, Advanced Materials and Processes, vol. 168, pp. 24-27, 2010.
2. R. Tucker, Metal Finishing, vol. 111, pp. 31-33, 2013.10.1016/S0026-0576(13)70160-0 ↗
3. S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman and D. L. Chen, Materials Science and Engineering A, vol. 636, p. 361–372, 2015.10.1016/j.msea.2015.03.077 ↗
4. H. Toda, T. Nishimura, K. Uesugi, Y. Suzuki and M. Kobayashi, Acta Materialia, vol. 58, pp. 2014-2025, 2010.10.1016/j.actamat.2009.11.044 ↗
5. G. Wang, X. Bian, W. Wang and J. Zhang, Materials Letters, vol. 57, p. 4083–4087, 2003.10.1016/S0167-577X(03)00270-2 ↗
6. S. K. Das, P. S. Gilman and D. Raybould, Key Engineering Materials, Vols. 38-39, pp. 367-392, 1989.
7. H. Jones, Materials in Aerospace: vol. 1, London: The Royal Aeronautical Society, 1986.
8. K. E. Knipling, “Development of a nanoscale precipitation-strengthened creep-resistant aluminum alloys containing trialuminide precipitates,” NORTHWESTERN UNIVERSITY, EVANSTON, IL, 2006.
9. N. A. Belov, D. G. Eskin and N. N. Avxentieva, Acta Materialia, vol. 53, pp. 4709-4722, 2005.10.1016/j.actamat.2005.07.003 ↗
10. T. Sato, A. Kamio and G. W. Lormier, Materials Science Forum, Vols. 217-222, pp. 895-900, 1996.10.4028/www.scientific.net/MSF.217-222.895 ↗
11. V. Raghavan, Journal of Phase Equilibria and Diffusion, vol. 26, pp. 639-640, 2005.10.1007/s11669-005-0014-7 ↗
12. M. Bulanova, L. Tretyachenko, M. Golovkova and K. Meleshevich, Journal of Phase Equilibria and Diffusion, vol. 25, pp. 209-229, 2004.10.1007/s11669-004-0110-0 ↗
13. S. K. Chaudhury and D. Apelian, Metallurgical and Materials Transactions A, vol. 37A, pp. 763-778, 2006.10.1007/s11661-006-0048-4 ↗
14. P. Sepehband, R. Mahmudi and F. Khomamizadeh, Scripta Materialia, vol. 52, pp. 253-257, 2005.10.1016/j.scriptamat.2004.10.025 ↗
15. R. Mahmudi, P. Sepehrband and H. M. Ghasemi, Mater. Lett., vol. 60, pp. 2606-2610, 2006.10.1016/j.matlet.2006.01.046 ↗
16. J. Hernandez-Sandoval, G. H. Garza-Elizondo, A. M. Samuel, S. Valtiierra and F. H. Samuel, Materials and Design, vol. 58, pp. 89-101, 2014.10.1016/j.matdes.2014.01.041 ↗
17. W. Kasprzak, D. Emadi, M. Sahoo and M. Aniolek, Mater. Sci. Forum., Vols. 618-619, pp. 595-600, 2009.10.4028/www.scientific.net/MSF.618-619.595 ↗
18. W. Kasprzak, D. L. Chen and S. K. Shaha, J. Mater. Eng. Perform., vol. 22, pp. 1838-1847, 2013.10.1007/s11665-013-0578-z ↗
19. S. K. Shaha, F. Czerwinski, W. Kasprzak and D. L. Chen, J. Alloys Compd., vol. 593, pp. 290-299, 2014.10.1016/j.jallcom.2013.12.081 ↗
20. T. Gao, X. Zhu, Q. Sun and X. Liu, J. Alloys Compd., vol. 567, pp. 82-88, 2013.10.1016/j.jallcom.2013.03.064 ↗
21. S. K. Shaha, F. Czerwinski, W. Kasprzak and D. L. Chen, Materials and Design, vol. 59, pp. 352-358, 2014.10.1016/j.matdes.2014.02.060 ↗
22. K. L. Sahoo and B. N. Pathak, Journal of Materials Processing Technology, vol. 209, pp. 798-804, 2009.10.1016/j.jmatprotec.2008.02.043 ↗
23. X. -G. Chen and M. Fortier, Journal of Materials Processing Technology, vol. 210, pp. 1780-1786, 2010.10.1016/j.jmatprotec.2010.06.009 ↗
24. C. Booth-Morrison, Z. Mao, M. Diaz, D. C. Dunand, C. Wolverton and D. N. Seidman, Acta Materialia, vol. 60, pp. 4740-4752, 2012.10.1016/j.actamat.2012.05.036 ↗
25. Y. Li, Y. Yang, Y. Wu, L. Wang and X. Liu, Materials Science and Engineering: A, vol. 527, pp. 7132-7137, 2010.10.1016/j.msea.2010.07.073 ↗
26. Y. Li, Y. Yang, Y. Wu, Z. Wei and X. Liu, Materials Science and Engineering: A, vol. 528, pp. 4427-4430, 2011.10.1016/j.msea.2011.02.047 ↗
27. J. H. Hollomon, Trans. AIME, vol. 162, pp. 268-290, 1945.
28. Y. Meng, J. Cui,. Z. Zhao and Y. Zuo, Journal of Alloys and Compounds, vol. 573, pp. 102-111, 2013.10.1016/j.jallcom.2013.03.239 ↗
29. T. V. Atamanenko, D. G. Eskin, M. Sluiter and L. Katgerman, Journal of Alloys and Compounds, vol. 509, pp. 57-60, 2011.10.1016/j.jallcom.2010.09.046 ↗
30. T. Gao and X. Liu, Journal of Materials Science & Technology, vol. 29, pp. 291-296, 2013.10.1016/j.jmst.2013.01.018 ↗
31. J. A. Taylor, Procedia Materials Science, vol. 1, p. 19 – 33, 2012.10.1016/j.mspro.2012.06.004 ↗
32. S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman and D. L. Chen, International Journal of Fatigue, vol. 70, pp. 383-394, 2015.10.1016/j.ijfatigue.2014.08.001 ↗
33. O. Elsebaie, A. M. Samuel, F. H. Samuel and H. W. Doty, Materials and Design, vol. 60, pp. 496-509, 2014.10.1016/j.matdes.2014.04.031 ↗
34. L. G. Hou, H. Cui, Y. H. Cai and J. S. Zhang, Materials Science and Engineering A, vol. 527, p. 85–92, 2009.10.1016/j.msea.2009.07.041 ↗
35. K. L. Fan, G. Q. He, X. S. Liu, B. Liu, M. She, Y. L. Yuan, Y. Yang and Q. Lu, Materials Science and Engineering: A, Vols. 78-85, p. 586, 2013.
36. S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman and D. L. Chen, Thermochimica Acta, vol. 595, pp. 11-16, 2014.10.1016/j.tca.2014.08.037 ↗
37. L. Hurtalová, E. Tillová and M. Chalupová, The Archive of Mechanical Engineering, vol. 59, pp. 385-396., 2012.10.2478/v10180-012-0020-3 ↗
38. A. M. Mohamed, F. H. Samuel and S. Al-kahtani, Materials Science and Engineering: A, vol. 577, pp. 64-72, 2013.10.1016/j.msea.2013.03.084 ↗
39. L. Lasa and J. M. Rodriguez-Ibabe, Journal of Materials Science, vol. 39, pp. 1343-1355, 2004.10.1023/B:JMSC.0000013895.72084.c9 ↗
40. M. F. Ibrahim, E. Samuel, A. M. Samuel, A. M. Al-Ahmari and F. H. Samuel, Materials and Design, vol. 32, pp. 2130-2142, 2011.10.1016/j.matdes.2010.11.040 ↗
41. W. Kasprzak, B. S. Amirkhiz and M. Niewczas, J. Alloys Compd., vol. 595, pp. 67-79, 2014.10.1016/j.jallcom.2013.11.209 ↗
42. A. M. Samuel, J. Gauthier and F. H. Samuel, Metallurgical and Materials Transactions A, vol. 27, pp. 1785-1798, 1996.10.1007/BF02651928 ↗
43. M. Tiryakioğlu, J. Campbell and N. D. Alexopoulos, Metallurgical and Materials Transactions B, vol. 40, pp. 802-811, 2009.10.1007/s11663-009-9304-5 ↗
44. U. F. Kocks and H. Mecking, Prog. Mater. Sci., vol. 48, pp. 171-273, 2003.10.1016/S0079-6425(02)00003-8 ↗
45. M. R. Daymond, C. Hartig and H. Mecking, Acta Materialia, vol. 53, pp. 2805-2813, 2005.10.1016/j.actamat.2005.02.041 ↗
46. S. K. Shaha, F. Czerwinski, D. L. Chen and W. Kasprzak, Materials Science and Technology, vol. 31, pp. 63-72, 2015.10.1179/1743284714Y.0000000606 ↗
47. J. Kratochvil and M. Saxlová, Physica Scripta, vol. T49, p. 399–404, 1993.10.1088/0031-8949/1993/T49B/003 ↗
48. H. A. Elhadari, H. A. Patel, D. L. Chen and W. Kasprzak, Mater. Sci. Eng. A, vol. 528, pp. 8128-8138, 2011.10.1016/j.msea.2011.07.018 ↗
49. N. Afrin, D. L. Chen, X. Cao and M. Jahazi, Scripta Materialia, vol. 57, pp. 1004-1007, 2007.10.1016/j.scriptamat.2007.08.001 ↗
50. A. R. Emami, S. Begum, D. L. Chen, T. Skszek, X. P. Niu, Y. Zhang and F. Gabbianelli, Materials Science and Engineering: A, vol. 516, pp. 31-41, 2009.10.1016/j.msea.2009.04.037 ↗
51. P. A. Rometsch and G. B. Schaffer, Materials Science and Engineering: A, vol. 325, pp. 424-434, 2002.10.1016/S0921-5093(01)01479-4 ↗
52. W. F. Hosford, in Mechanical Behavior of Materials, New York, Cambridge University Press, 2005, pp. 279-307.10.1017/CBO9780511810930 ↗
53. Q. G. Wang, D. Apelian and D. A. Lados, Journal of Light Metals, vol. 1, pp. 85-97, 2001.10.1016/S1471-5317(00)00009-2 ↗
54. Q. G. Wang, D. Apelian and D. A. Lados, Journal of Light Metals, vol. 1, pp. 73-84, 2001.10.1016/S1471-5317(00)00008-0 ↗
55. H. R. Ammar, A. M. Samuel and F. H. Samuel, International Journal of Fatigue, vol. 30, pp. 1024-1035, 2008.10.1016/j.ijfatigue.2007.08.012 ↗
56. Q. G. Wang, P. N. Crepeau, C. J. Davidson and J. R. Griffiths, Metallurgical and Materials Transactions B, vol. 37, pp. 887-895, 2006.10.1007/BF02735010 ↗
57. J. Z. Zhou, S. Huang, J. Sheng, J. Z. Lu, C. D. Wang, K. M. Chen, H. Y. Ruan and H. S. Chen, Materials Science and Engineering: A, vol. 539, pp. 360-368, 2012.10.1016/j.msea.2012.01.125 ↗
58. J. B. Jordon, M. F. Horstemeyer, N. Yang, J. F. Major, K. A. Gall, J. Fan and D. L. McDowell, Metallurgical and Materials Transactions A, vol. 41, pp. 356-363, 2010.10.1007/s11661-009-0088-7 ↗
59. M. F. Ibrahim, E. Samuel, A. M. Samuel, A. M. Al-Ahmari and F. H. Samuel, Materials and Design, vol. 32, pp. 3900-3910, 2011.10.1016/j.matdes.2011.02.058 ↗
60. Y. Yang, K. Yu, Y. Li,. D. Zhao and X. Liu, Materials & Design, vol. 33, pp. 220-225, 2012.10.1016/j.matdes.2011.06.058 ↗
61. O. Reiso, H. Westengen and L. Auran, in Internationale Leichtmetalltagung, Montanuniv Leoben, Austria, 1981.
62. M. Okayasu, R. Sato, S. Takasu, A. Niikura and T. Shiraishi, Materials Science and Engineering: A, vol. 534, pp. 614-623, 2012.10.1016/j.msea.2011.12.018 ↗