Effect of V and N Precipitation on Acicular Ferrite Formation in Sulfur-Lean Vanadium Steels
Source abstract
Abstract
This article deals with the mechanical properties achieved in two S-lean laboratory-cast V steels with two different N content levels, as compared with commercial acicular ferrite steel. The designed heat treatments ensure an almost homogeneous microstructure consisting of acicular ferrite for N-rich and commercial steels and consisting of bainite for the N-lean steel. The results presented in this work demonstrate that, in the absence of sul.de inclusions, acicular ferrite is nucleated on V(C,N) precipitates. The mechanical tests indicate that N-rich acicular ferrite steel achieves the same toughness values as N-lean bainitic steel but with a substantial improvement in strength properties. The S-lean steels present better toughness properties than commercial acicular ferrite steel, which is consistent with the detrimental e.ect of inclusions on toughness. © The Minerals, Metals & Materials Society and ASM International 2009.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Y.E. Smith, A.P. Coldren, R.L. Cryderman: Toward Improved Ductility and Toughness, Climax Molybdenum, Tokyo, 1972, pp. 119–42
2. S.S. Babu: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 267–7810.1016/j.cossms.2004.10.001 ↗
3. S.S. Babu, H.K.D.H. Bhadeshia: Mater. Trans., JIM, 1991, vol. 32, pp. 679–8810.2320/matertrans1989.32.679 ↗
4. I. Madariaga, I. Gutierrez, H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2187–9710.1007/s11661-001-0194-7 ↗
5. M. Strangwood, H.K.D.H. Bhadeshia: Advances in Welding Science and Technology, ASM, Metals Park, OH, 1987, pp. 209–13
6. M.C. Zhao, Y.Y. Shan, F.R. Xiao, K. Yang: Mater. Sci. Technol., 2003, vol. 19, pp. 355–5910.1179/026708303225010641 ↗
7. I. Madariaga, I. Gutierrez, C. Garcia-de Andres, C. Capdevila: Scripta Mater., 1999, vol. 41, pp. 229–3510.1016/S1359-6462(99)00149-9 ↗
8. C. Capdevila, F.G. Caballero, C. Garcia de Andres: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1591–9710.1007/s11661-001-0137-3 ↗
9. C. Capdevila, F.G. Caballero, C. Garcia de Andres: ISIJ Int., 2001, vol. 41, pp. 1083–9210.2355/isijinternational.41.1083 ↗
10. C. Capdevila, J.P. Ferrer, C. Garcia-Mateo, F.G. Caballero, V. Lopez, C. Garcia de Andres: ISIJ Int., 2006, vol. 46, pp. 1093–110010.2355/isijinternational.46.1093 ↗
11. M.G. Hall, H.I. Aaronson: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1923–3110.1007/BF02649040 ↗
12. R.A. Ricks, P.R. Howell, G.S. Barrite: J. Mater. Sci., 1982, vol. 17, pp. 732–4010.1007/BF00540369 ↗
13. J.M. Gregg, H.K.D.H. Bhadeshia: Acta Mater., 1997, vol. 45, pp. 739–4810.1016/S1359-6454(96)00187-5 ↗
14. K. Yamamoto, T. Hasegawa, J. Takamura: ISIJ Int., 1996, vol. 36, pp. 80–8610.2355/isijinternational.36.80 ↗
15. H. Mabuchi, R. Uemori, M. Fujioka: ISIJ Int., 1996, vol. 36, pp. 1406–1210.2355/isijinternational.36.1406 ↗
16. J.-L. Lee, Y.-T. Pan: ISIJ Int., 1995, vol. 35, pp. 1027–3310.2355/isijinternational.35.1027 ↗
17. Z. Zhang, R.A. Farrar: Mater. Sci. Technol., 1996, vol. 12, pp. 237–6010.1179/mst.1996.12.3.237 ↗
18. J.-L. Lee, Y.-T. Pan: Mater. Sci. Technol., 1992, vol. 8, pp. 236–4410.1179/mst.1992.8.3.236 ↗
19. Z.H. Guo, T. Furuhara, T. Maki: Scripta Mater., 2001, vol. 45, pp. 525–3210.1016/S1359-6462(01)01053-3 ↗
20. F. Ishikawa, T. Takahashi, T. Ochi: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 929–3610.1007/BF02652268 ↗
21. T. Furuhara, T. Maki: Mater. Sci. Eng., A, 2001, vol. A312, pp. 145–5410.1016/S0921-5093(00)01904-3 ↗
22. I. Madariaga, I. Gutierrez: Acta Mater., 1999, vol. 47, pp. 951–6010.1016/S1359-6454(98)00388-7 ↗
23. C. Garcia-Mateo, C. Capdevila, F.G. Caballero, C. Garcia de Andres: ISIJ Int., 2008, vol. 48, pp. 1270–7510.2355/isijinternational.48.1270 ↗
24. C. Garcia-Mateo, J. Cornide, C. Capdevila, F.G. Caballero, C. Garcia de Andres: ISIJ Int., 2008, vol. 48, pp. 1276–7910.2355/isijinternational.48.1276 ↗
25. F.G. Caballero, C. Capdevila, C.G. de Andres: Mater. Sci. Technol., 2001, vol. 17, pp. 1114–1810.1179/026708301101511031 ↗
26. C. Capdevila, C.G. de Andres, F.G. Caballero: Scripta Mater., 2001, vol. 44, pp. 129–3410.1016/S1359-6462(00)00564-9 ↗
27. “ASTM E-399 Standard Test Method for Plane Strain Toughness of Metallic Materials,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 1995, vol. 03.01, pp. 412–42
28. A. Pineau: in Advances in Fracture Research ICF5, D. Francois, ed., Pergamon Press, Oxford, United Kingdom, 1982, pp. 553–77
29. A.C Mackenzie, J.W Hancock, D.K. Brown: Eng. Fract. Mech., 1977, vol. 9, pp. 167–8810.1016/0013-7944(77)90062-5 ↗
30. J.C. Lautridou, A. Pineau: Eng. Fract. Mech., 1981, vol. 15, pp. 55–7110.1016/0013-7944(81)90105-3 ↗
31. G.R. Speich, W.A. Spitzing: Metall. Trans. A, 1982, vol. 13A, pp. 2239–5810.1007/BF02648395 ↗
32. G.T. Hahn: Metall. Trans. A, 1984, vol. 15A, pp. 947–5910.1007/BF02644685 ↗
33. A.F. Gourgues-Lorenzon: Int. Mater. Rev., 2007, vol. 52, pp. 65–12810.1179/174328007X160254 ↗
34. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, J.J. Urcola: Scripta Metall. Mater., 1995, vol. 32, pp. 395–40010.1016/S0956-716X(99)80071-5 ↗
35. M. Diaz-Fuentes, A. Iza-Mendia, I. Gutierrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2505–1610.1007/s11661-003-0010-7 ↗
36. T. Yamane, K. Hisayuki, Y. Kawazu, T. Takahashi, Y. Kimura, S. Tsukuda: J. Mater. Sci., 2002, vol. 37, pp. 3875–7910.1023/A:1019695104094 ↗
37. K.S. Bang, C. Park, S. Liu: J. Mater. Sci., 2006, vol. 41, pp. 5994–600010.1007/s10853-006-0498-5 ↗