journal article·2000-09

Effect of particle-size distribution on the properties of high-volume-fraction SiC p -Al-based composites

Chang-You Chen, Chuen-Guang Chao

Publisher page

Abstract

High-volume-fraction SiC-Al-based composites have been fabricated by squeeze casting. The effect of particle-size distribution and squeeze-cast parameters on the metal-matrix composites (MMCs) was investigated. The results showed that bulk density of the composites was 2.855 to 3.067 g/cm3 with the various component mixtures of SiC particulates, i.e., the SiC volume fraction was 51.6 to 74.4 pct. The young’s modulus of the composites was between 220 and 226 GPa. The maximum four-point bending strength and fracture toughness reached 478 MPa and 9.42 MPa(m)−1/2, respectively. The coefficient of thermal expansion (CTE) of the composites was from 5 to 8 × 10−6/K, depending on the volume fraction of SiC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J.K. Lee, Y.V. Earmme, H.I. Aaronson, and K.C. Russell: Metall. Trans. A, 1980, vol. 11A, pp. 1837–847.10.1007/BF02655099 ↗
2. W.R. Mohn and G.A. Gegel: Advanced Composites: The Lastest Developments, Advanced Composites, P. Beardmore and C.F. Johnson, eds., Proc. 2nd Conf. on Advanced Composites, P. Beardmore and C.F. Johnson, eds., ASM INTERNATIONAL, Metals Parks, OH, 1986, pp. 69–73.
3. P. Niskanen and W.R. Mohn: Adv. Mater. Processes, 1988, vol. 133 (3), pp. 39–41.
4. W.R. Mohn and D. Vukobratovich: J. Mater. Eng., 1988, vol. 10 (3), pp. 225–235.10.1007/BF02834166 ↗
5. A.L. Geiger and M. Jackson: Adv. Mater. Processes, 1989, vol. 136 (1), pp. 23–30.
6. C. Thaw, R. Minet, J. Zemany, and C. Zweben: SAMPE J., 1987, Nov–Dec., pp. 40–43.
7. T.A. Hahn and R.W. Armstrong: Int. J. Thermophys., 1988, vol. 9 (5), pp. 861–71.10.1007/BF00503251 ↗
8. D.L. McDanels: Metall. Trans. A, 1985, vol. 16A, pp. 1105–15.10.1007/BF02811679 ↗
9. T.G. Nieh and D.J. Chellmam: Scripta Metall., 1984, vol. 18 p. 925.10.1016/0036-9748(84)90262-X ↗
10. M.K. Premkumar, W.H. Hunt, Jr., and R.R. Sawtell: JOM, 1992, July, pp. 24–29.10.1007/BF03222271 ↗
11. A.J. Cook and P.S. Werner: Mater. Sci. Eng. A, 1991, vol. 24A, pp. 186–206.
12. J. Yang and D.D.L. Chung: J. Mater. Sci., 1989, vol. 24, pp. 3605–12.10.1007/BF02385746 ↗
13. Shy-Wen Lai and D.D.L. Chung: J. Mater. Sci., 1994, vol. 29, pp. 3128–150.10.1007/BF00356655 ↗
14. C.R. Cook, D.I. Yun, and W.H. Hunt, Jr.: Proc. Int. Symp. on Advanced in Cast Reinforced Metal Composites, ASM, Metal Park, OH, 1988, pp. 195–204.
15. S.K. Verma and J.L. Dorcic: Proc. Int. Symp. on Advanced in Cast Reinforced Metal Composites, ASM, Metal Park, OH, 1988, pp. 115–26.
16. H.D. Lewis and A. Golfmsn: J. Am. Ceramic Soc., 1966, vol. 49, pp. 323–27.10.1111/j.1151-2916.1966.tb13273.x ↗
17. R.M. German: Powder Metallurgy Science, Metal Powder Industrues Federation, Princeton, NJ, 1984, pp. 27–36.
18. H.T. Horsfield: J. Soc. Chem. Ind., 1934, vol. 53, pp. 107T-115T.10.1002/jctb.5000531605 ↗
19. A. Wolfenden, M.R. Harmouche, and S.V. Hayes: Testing Technology of Metal Matrix Composites, ASTM STP 964, P.R. DiGiovanni and N.R. Adsit, eds., ASTM, Philadelphia, PA, 1988, pp. 207–15.10.1520/STP25954S ↗
20. Z. Hashin and S. Shtrikman: J. Mech. Phys. Solids, 1963, vol. 11, pp. 127–40.10.1016/0022-5096(63)90060-7 ↗
21. B. Paul: Trans. AIME, 1960, vol. 218, p. 36.