journal article·2015-03Open access

Influence of Solid Solution Hardening on Creep Properties of Single-Crystal Nickel-Based Superalloys

Ernst Fleischmann, Christian Konrad, Johannes Preußner, Rainer Völkl, Ernst Affeldt, Uwe Glatzel

Abstract

Improving the creep resistance of the matrix by alloying with refractory elements is a major strengthening effect in nickel-based superalloy with rhenium as one of the most effective elements. In this work, the influence of rhenium on creep properties of single-phase single crystals with varying rhenium content and matrix-near composition is investigated. The use of single-crystalline material leads to very distinct results which are not deteriorated by grain boundary effects. So the strengthening effect can be solely attributed to the alloying element rhenium and is quantified for the first time. By comparing the creep strength of two matrix compositions with the corresponding single-crystal superalloys using the threshold stress concept, the potential of creep strengthening of the matrix in two-phase single-crystal alloys is quantified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds.: Superalloys II: High Temperature Materials for Aerospace and Industrial Power, 2nd. ed., WileyBlackwell, New York, 1987.
2. T. Khan: in High Temperature Alloys for Gas Turbines and Other Applications, Part I, W. Betz, R. Brunetaud, D. Coutsouradis, H. Fischmeister, T.B. Gibbons, I. Kvernes, Y. Lindblom, J.B. Marriot, D.B. Meadowcroft eds., D. Reidel Publishing Company, Dordrecht, Holland, 1986, pp. 21–50.
3. M.V. Nathal: Metall. Trans. A, 1987, vol. 18A, pp. 1961-1970.10.1007/BF02647026 ↗
4. T. Murakumo, T. Kobayashi, Y. Koizumi, H. Harada: Acta Mater., 2004, vol. 52, pp. 3737-3744.10.1016/j.actamat.2004.04.028 ↗
5. K. Harris, G.L. Erickson, S.L. Sikkenga, W.D. Brentnall, J.M. Aurrecoechea, K.G. Kubarych: J. Mater. Eng. Perform., 1993, vol. 2, pp. 481-487.10.1007/BF02661730 ↗
6. A.K. Jena, M.C. Chaturvedi: Review - The Role of Alloying Elements in the Design of Nickel-base Superalloys, Journal of Materials Science 19 (1984) 3121-3139.10.1007/BF00549796 ↗
7. A.D. Cetel and D.N. Duhl: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, 1988, pp. 235–44.10.7449/1988/Superalloys_1988_235_244 ↗
8. P.J. Fink, J.L. Miller, D.G. Konitzer: JOM, 2010, vol. 62, pp. 55-57.10.1007/s11837-010-0012-z ↗
9. C.M.F. Rae, R.C. Reed: Acta mater., 2001, vol. 49, pp. 4113-4125.10.1016/S1359-6454(01)00265-8 ↗
10. K. Kawagishi, H. Harada, A. Sato, A. Sato, T. Kobayashi: JOM, 2006, vol. 58, pp. 43-46.10.1007/s11837-006-0067-z ↗
11. K. Harris and G.L. Erickson: U.S. Patent 4,643,782, 1987.10.1177/0038038587021004018 ↗
12. B. Sundman, B. Jansson, J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153-190.10.1016/0364-5916(85)90021-5 ↗
13. N. Saunders, M. Fahrmann, and C.J. Small: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, J.J. Schirra eds., TMS, Warrendale, 2000, pp. 803–11.10.7449/2000/Superalloys_2000_803_811 ↗
14. N. Wanderka, U. Glatzel: Mater. Sci. Eng. A, 1995, vol. 203A, pp. 69-74.10.1016/0921-5093(95)09825-9 ↗
15. K. Harris, G.L. Erickson, and R.E. Schwer: in Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich eds., TMS, Warrendale, 1984, pp. 221–230.10.7449/1984/Superalloys_1984_221_230 ↗
16. C.H. Konrad, M. Brunner, K. Kyrgyzbaev, R. Völkl, U. Glatzel: J. Mater. Process. Technol., 2011, vol. 211, pp. 181-186.10.1016/j.jmatprotec.2010.08.031 ↗
17. M. Bensch, E. Fleischmann, C. Konrad, R. Völkl, C.M.F. Rae, and U. Glatzel: in Superalloys 2012, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, J. Telesman eds., TMS, Warrendale, 2012, pp. 387–94.10.1002/9781118516430.ch42 ↗
18. C. Schulze, M. Feller-Kniepmeier: Mater. Sci. Eng. A, 2000, vol. 281A, pp. 204-212.10.1016/S0921-5093(99)00713-3 ↗
19. T.M. Pollock, A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1-30.10.1016/0956-7151(92)90195-K ↗
20. B.C. Wilson, J.A. Hickman, G.E. Fuchs: JOM, 2003, vol. 55, pp. 35-40.10.1007/s11837-003-0158-z ↗
21. M. Brunner, M. Bensch, R. Völkl, E. Affeldt, U. Glatzel: Mater. Sci. Eng. A, 2012, 550A, pp. 254-262.10.1016/j.msea.2012.04.067 ↗
22. R. Völkl, D. Freund, B. Fischer: J. Test. Eval., 2003, vol. 31, pp. 35-43.10.1520/JTE12351J ↗
23. R. Völkl, B. Fischer: Exp. Mech., 2004, vol. 44(2), pp. 121-128.10.1007/BF02428171 ↗
24. R. Lagneborg, B. Bergman: Met. Sci., 1976, vol. 10, pp. 20-28.10.1179/030634576790431462 ↗
25. W. Schneider, J. Hammer, and H. Mughrabi: in Superalloys 1992, S.D. Antolovich, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom eds., TMS, Warrendale, 1992, pp. 589–98.10.7449/1992/Superalloys_1992_589_598 ↗
26. M.V. Nathal, R.A. MacKay: Mater. Sci. Eng., 1987, vol. 85, pp. 127-138.10.1016/0025-5416(87)90474-5 ↗
27. P. Caron, T. Khan: Mater. Sci. Eng., 1983, vol. 61, pp. 173-184.10.1016/0025-5416(83)90199-4 ↗
28. J.X. Zhang, J.C. Wang, H. Harada, Y. Koizumi: Acta Mater., 2005, vol. 53, pp. 4623-4633.10.1016/j.actamat.2005.06.013 ↗
29. D. Siebörger, H. Knake, U. Glatzel: Mater. Sci. Eng. A, 2001, vol. 298A, pp. 26-33.10.1016/S0921-5093(00)01318-6 ↗