journal article·2006-11

Multilayered ruthenium-modified bond coats for thermal barrier coatings

B. Tryon, Q. Feng, T. M. Pollock, R. G. Wellman, J. R. Nicholls, K. S. Murphy, J. Yang, C. G. Levi

Publisher page

Abstract

Diffusional approaches for fabrication of multilayered Ru-modified bond coats (BCs) for thermal barrier coatings (TBCs) have been developed vialow-activity (LA) chemical vapor deposition andhigh-activity (HA) pack aluminization. Both processes yield BCs comprising two distinct B2 layers, based on NiAl and RuAl; however, the position of these layers relative to the BC surface is reversed when switching processes. The structural evolution of each coating at various stages of the fabrication process and subsequent cyclic oxidation is presented, and the relevant interdiffusion and phase equilibria issues are discussed. Evaluation of the oxidation behavior of these Ru-modified BC structures reveals that each B2 interlayer arrangement leads to the formation of α-Al2O3 TGO at 1100 °C, but the durability of the TGO is somewhat different and in need of further improvement in both cases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Semiconductor materials and devices · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. S.M. Meier and D.K. Gupta:Trans. ASME, 1994, vol. 116, pp. 250–57.10.1115/1.2910869 ↗
2. R.L. Jones: inMetallurgical and Ceramic Protective Coatings, K.H. Stern, ed., Chapman & Hall, London, 1996, pp. 194–235.10.1007/978-94-009-1501-5_8 ↗
3. C.G. Levi:Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 77–91.10.1016/j.cossms.2004.03.009 ↗
4. J.-F. Bisson, D. Fournier, M. Poulian, O. Lavigne, and R. Mévrel:J. Am. Ceram. Soc., 2000, vol. 83, pp. 1993–98.10.1111/j.1151-2916.2000.tb01502.x ↗
5. T.J. Lu, C.G. Levi, H.N.G. Wadley, and A.G. Evans:J. Am. Ceram. Soc., 2001, vol. 84, pp. 2937–46.10.1111/j.1151-2916.2001.tb01118.x ↗
6. M. Poulian, J.-M. Dorvaux, O. Lavigne, and R. Mévrel: inSurface Modification Technologies IV, T.S. Sudarshan and M. Jeandin, eds., ASM INTERNATIONAL, Materials Park, OH, 2001, pp. 495–502.
7. P.K. Wright and A.G. Evans:Curr. Opin. Solid State Mater. Sci., 1999, vol. 4, pp. 255–65.10.1016/S1359-0286(99)00024-8 ↗
8. R.M. Leckie, S. Krämer, M. Rühle, and C.G. Levi:Acta Mater., 2005, vol. 52, pp. 3281–92.10.1016/j.actamat.2005.03.035 ↗
9. J.R. Nicholls:JOM, 2000, vol. 52, pp. 28–35.10.1007/s11837-000-0112-2 ↗
10. G.W. Goward and D.H. Boone:Oxid. Met., 1971, vol. 3, pp. 475–95.10.1007/BF00604047 ↗
11. A.J. Hickl and R.W. Heckel:Metall. Trans. A, 1975, vol. 6A, pp. 431–40.10.1007/BF02658400 ↗
12. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit:Progr. Mater. Sci., 2001, vol. 46, pp. 505–53.10.1016/S0079-6425(00)00020-7 ↗
13. D.K. Das, V. Singh, and S.V. Joshi:Oxid. Met., 2002, vol. 57, pp. 245–66.10.1023/A:1014822217982 ↗
14. C.G. Levi, E. Sommer, S.G. Terry, A. Catanoiu, and M. Rühle:J. Am. Ceram. Soc., 2003, vol. 86, pp. 676–85.10.1111/j.1151-2916.2003.tb03357.x ↗
15. M.J. Stiger, N.M. Yanar, M. Topping, F.S. Pettit, and G.H. Meier:Z. Metallkd., 1999, vol. 90, pp. 1069–78.
16. M.W. Chen, R.T. Ott, T.C. Hufnagel, P.K. Wright, and K.J. Hemker:Surf. Coating Technol., 2003, vol. 163–164, pp. 25–30.10.1016/S0257-8972(02)00591-1 ↗
17. V.K. Tolpygo, D.R. Clarke, and K.S. Murphy:Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1467–78.10.1007/s11661-001-0235-2 ↗
18. V.K. Tolpygo and D.R. Clarke:Acta Mater., 2000, vol. 48, pp. 3283–93.10.1016/S1359-6454(00)00156-7 ↗
19. M.W. Chen, M.L. Glynn, R.T. Ott, T.C. Hufnagel, and K.J. Hemker:Acta Mater., 2003, vol. 51, pp. 4279–94.10.1016/S1359-6454(03)00255-6 ↗
20. V.K. Tolpygo and D.R. Clarke:Acta Mater., 2004, vol. 52, pp. 5129–41.
21. N. Birks, G.H. Meier, and F.S. Pettit:J. Met., 1994, vol. 46, pp. 42–46.
22. J.A. Haynes, M.J. Lance, B.A. Pint, and I.G. Wright:Surf. Coating Technol., 2001, vols. 146–147, pp. 140–46.10.1016/S0257-8972(01)01483-9 ↗
23. J. Angenete and K. Stiller:Mater. Sci. Eng., A, 2001, vol. 316, pp. 182–94.10.1016/S0921-5093(01)01236-9 ↗
24. J. Angenete, K. Stiller, and V. Langer:Oxid. Met., 2003, vol. 60, pp. 47–82.10.1023/A:1024665229656 ↗
25. K.S. Murphy: U.S. Patent No. 5,856,027, 1999.10.1088/1126-6708/1999/12/027 ↗
26. D.K. Das, V. Singh, and S.V. Joshi:Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2037–47.10.1007/s11661-000-0231-y ↗
27. J.R. Nicholls and D.J. Stephenson: inIntermetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, Ltd., New York, NY, 1995, vol. 2, pp. 489–500.
28. J. Angenete and K. Stiller:Surf. Coating Technol., 2002, vol. 150, pp. 107–18.10.1016/S0257-8972(01)01544-4 ↗
29. D.R. Mumm, A.G. Evans, and I.T. Spitsberg:Acta Mater., 2001, vol. 49, pp. 2329–40.10.1016/S1359-6454(01)00071-4 ↗
30. V.K. Tolpygo and D.R. Clarke:Acta Mater., 2004, vol. 52, pp. 5115–27.
31. N.R. Rebollo, M.Y. He, C.G. Levi, and A.G. Evans:Z. Metallkd., 2003, vol. 94, pp. 171–79.10.3139/146.030171 ↗
32. J.A. Nychka, T. Xu, D.R. Clarke, and A.G. Evans:Acta Mater., 2004, vol. 52, pp. 2561–68.10.1016/j.actamat.2004.02.004 ↗
33. D.R. Clarke:Acta Mater., 2003, vol. 14, pp. 1393–407.10.1016/S1359-6454(02)00532-3 ↗
34. A.M. Karlsson, J.W. Hutchinson, and A.G. Evans:J. Mater. Sci., 2002, vol. 50, pp. 1565–89.
35. D.S. Balint and J.W. Hutchinson:Acta Mater., 2003, vol. 51, pp. 3965–83.10.1016/S1359-6454(03)00221-0 ↗
36. A.M. Karlsson and A.G. Evans:Acta Mater., 2001, vol. 49, pp. 1793–804.10.1016/S1359-6454(01)00073-8 ↗
37. B. Tryon, F. Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock:J. Met., 2006, vol. 58, pp. 53–59.
38. I.M. Wolff:J. Met., 1997, vol. 49, pp. 34–39.
39. R.D. Noebe, R.R. Bowman, and M.V. Nathal:Int. Mater. Rev., 1993, vol. 38, pp. 193–232.10.1179/imr.1993.38.4.193 ↗
40. T.K. Nandy, Q. Feng, and T.M. Pollock:Intermetallics, 2003, vol. 11, pp. 1029–38.10.1016/S0966-9795(03)00134-1 ↗
41. D.C. Lu and T.M. Pollock:Acta Metall., 1998, vol. 47, pp. 1035–42.
42. D.C. Lu and T.M. Pollock:Mater. Res. Soc. Symp. Proc., 1999, vol. 552, pp. KK7.11.1-KK7.11.5.
43. T.M. Pollock, D.C. Lu, X. Shi, and K. Eow:Mater. Sci. Eng., A, 2001, vol. 317, pp. 241–48.10.1016/S0921-5093(01)01163-7 ↗
44. I.T. Spitsberg, R. Darolia, M.R. Jackson, J. Zhao, and J.C. Schaeffer: U.S. Patent No. 6,306,254 B1, 2001.
45. P.K. Datta, J.S. Burnell-Gray, and K. Natesan: inIntermetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, Ltd., New York, NY, 2002, vol. 3, pp. 561–88.10.1002/0470845856.ch27 ↗
46. B. Tryon, Q. Feng, and T. Pollock:Intermetallics, 2004, vol. 12, pp. 957–62.10.1016/j.intermet.2004.02.026 ↗
47. P.J. Bellina, A. Catanoiu, F.M. Morales, and M. Rühle:J. Mater. Res., 2006, vol. 21, pp. 276–86.10.1557/jmr.2006.0028 ↗
48. ASTM Designation E 1019, ASTM, Philadelphia, PA, 2003.
49. ASTM Designation E 1097, ASTM, Philadelphia, PA, 2003.
50. N.M. Yanar, M.J. Stiger, M. Maris-Sida, F.S. Pettit, and G.H. Meier:Key Eng. Mater., 2001, vol. 197, pp. 145–64.10.4028/www.scientific.net/KEM.197.145 ↗
51. Q. Feng, T.K. Nandy, and T. Pollock:Scripta Mater., 2004, vol. 50, pp. 849–54.10.1016/j.scriptamat.2003.12.013 ↗
52. P. Gargano, H. Mosca, G. Bozzolo, and R.D. Noebe:Scripta Mater., 2003, vol. 48, pp. 695–700.10.1016/S1359-6462(02)00556-0 ↗
53. B. Tryon and T.M. Pollock:Mater. Sci. Eng. A, 2006, vol. 430, pp. 266–76.10.1016/j.msea.2006.05.088 ↗
54. F. Mücklich and N. Ilic:Intermetallics, 2004, vol. 13, pp. 5–21.10.1016/j.intermet.2004.05.005 ↗
55. F. Cao, T.K. Nandy, D. Stobbe, and T.M. Pollock:Intermetallics, 2006.
56. G. Fisher, P.K. Datta, and J.S. Burnell-Gray:Surf. Coating Technol., 1999, vol. 113, pp. 259–67.10.1016/S0257-8972(99)00008-0 ↗