journal article·2002-08

Interphase boundary structure with irrational orientation relationship formed in grain boundary precipitation

T. Furuhara, T. Maki, K. Oishi

Publisher page

Abstract

Interphase boundary structure of bcc precipitates formed at fcc-matrix grain boundaries in a Ni-43 mass pct Cr alloy has been studied experimentally using transmission electron microscopy (TEM) and theoretically analyzed using a geometrical model (near-coincidence site (NCS) lattice model). On both sides of the grain boundary, regardless of the presence of near-rational orientation relationship Kurdjumov-Sachs(K-S) or Nishiyama-Wassermann(N-W), precipitate(bcc)/matrix(fcc) interphase boundaries exhibit planar facets that often contain ledges and regularly aligned, line defects. The analysis indicates that the facet planes correspond to the planes of higher NCS densities for either of the near-rational orientation relationships or the irrational orientation relationships. Similar results are obtained for the precipitate/matrix interface, which lost its original orientation relationship through matrix recrystallization. It is suggested that some partial coherency is expected even for interfaces with an irrational orientation relationship formed during grain boundary precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. C.S. Smith: Trans. ASM, 1953, vol. 45, p. 533.
2. H.I. Aaronson and K.C. Russell: Proc. Int. Conf. on Solid-to-Solid Phase Transformations, TMS-AIME, Warrendale, PA, 1982, p. 371.
3. T. Furuhara and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2887.10.1016/0956-7151(91)90105-A ↗
4. T. Furuhara and T. Maki: Mater. Trans., JIM, 1992, vol. 33, p. 734.10.2320/matertrans1989.33.734 ↗
5. Y. Mou and H.I. Aaronson: Acta Metall. Mater., 1994, vol. 42, p. 2159.10.1016/0956-7151(94)90040-X ↗
6. J.F. Nie, B.C. Muddle, T. Furuhara, and H.I. Aaronson: Scripta Mater., 1998, vol. 39, p. 637.10.1016/S1359-6462(98)00208-5 ↗
7. S.A. Hackney and G.J. Shiflet: Scripta Metall., 1985, vol. 19, p. 57.10.1016/0036-9748(85)90265-0 ↗
8. S.A. Hackney and G.J. Shiflet: Acta Metall., 1987, vol. 35, p. 1007.10.1016/0001-6160(87)90048-4 ↗
9. S.A. Hackney and G.J. Shiflet: Acta Metall., 1987, vol. 35, p. 1019.10.1016/0001-6160(87)90049-6 ↗
10. W. Bollman: Crystal Defects and Crystalline Interfaces, Springer-Verlag, New York, NY, 1970, p. 143.10.1007/978-3-642-49173-3_12 ↗
11. U. Dahmen: Acta Metall., 1982, vol. 30, p. 63.10.1016/0001-6160(82)90045-1 ↗
12. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27, p. 351.10.1016/0001-6160(79)90028-2 ↗
13. T. Furuhara and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2857.10.1016/0956-7151(91)90103-8 ↗
14. Q. Liang and W.T. Reynolds, Jr.: Metall. Mater. Trans. A, 1998, vol. 29A, p. 2059.10.1007/s11661-998-0032-2 ↗
15. N. Miyano, K. Ameyama, and G.C. Weatherly: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. S1999-S2003.10.2355/isijinternational.40.Suppl_S199 ↗
16. C.W. Bare, E.D. Gibson, and O.N. Carlson: Trans. AIME, 1964, vol. 230, p. 934.
17. C.P. Luo and G.C. Weatherly: Phil. Mag. A, 1988, vol. 58, p. 445.10.1080/01418618808210423 ↗
18. T. Furuhara, K. Wada, and T. Maki: Metall. Mater. Trans., 1995, vol. 26A, p. 1971.10.1007/BF02670668 ↗
19. M.G. Hall, H.I. Aaronson, and K.R. Kinsman: Surf. Sci. A, 1972, vol. 31, p. 257.10.1016/0039-6028(72)90264-6 ↗
20. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27, p. 365.10.1016/0001-6160(79)90029-4 ↗
21. T.B. Massalski: Acta Metall., 1958, vol. 6, p. 243.10.1016/0001-6160(58)90143-3 ↗
22. M.R. Plichta and H.I. Aaronson: Acta Metall., 1980, vol. 28, p. 1041.10.1016/0001-6160(80)90088-7 ↗
23. T. Furuhara, T. Ogawa, and T. Maki: Scripta Mater., 1996, vol. 34, p. 381.10.1016/0956-716X(95)00526-2 ↗
24. D. Vaughan: Acta Metall., 1970, vol. 18, p. 183.10.1016/0001-6160(70)90082-9 ↗
25. K. Ameyama, T. Maki, and I. Tamura: J. Jpn. Inst. Met., 1986, vol. 50, p. 502.
26. K. Amayama, M. Minagawa, T. Maki, and I. Tamura: Tetsu-to-Hagané, 1988, vol. 74, p. 602.
27. T. Furuhara, S. Takagi, H. Watanabe, and T. Maki: Metall. Mater. Trans. A, 1996, vol. 27A, p. 1630.
28. H. Fujiwara and K. Ameyama: J. Jpn. Inst. Met., 1999, vol. 63, p. 187.10.2320/jinstmet1952.63.2_187 ↗
29. T. Furuhara and T. Maki: Mater. Sci. Eng. A, 2001, vol. A312, p. 145.10.1016/S0921-5093(00)01904-3 ↗
30. J.K. Lee and H.I. Aaronson: Acta Metall., 1979, vol. 23, p. 799.10.1016/0001-6160(75)90196-0 ↗
31. J.K. Lee and H.I. Aaronson: Acta Metall., 1979, vol. 23, p. 809.10.1016/0001-6160(75)90197-2 ↗
32. M.R. Plichta, J.H. Perepezko, H.I. Aaronson, and W.F. Lange III: Acta Metall., 1980, vol. 28, p. 1034.