journal article·2009-01

Microstructural Response of Directionally Solidified René 80 Superalloy to Gas-Tungsten Arc Welding

R.K. Sidhu, O.A. Ojo, M.C. Chaturvedi

Publisher page

Abstract

The microstructural response of directionally solidified Rene 80 (DS Rene 80) superalloy to gas-tungsten-arc (GTA) welding was investigated. Rapid heating during welding resulted in a significant grain-boundary liquation of solid-state reaction product γ′ precipitates, intergranular elemental segregation induced M5B3 borides, and secondary solidification constituents MC carbides and sulfocarbides, which were all present in the preweld heat-treated alloy. Liquation of these particles embrittled the grain boundaries in the heat-affected zone (HAZ) and caused microfissuring along the liquated grain boundaries. Nevertheless, contrary to the generally observed increase in HAZ cracking in superalloys with an increase in Ti and Al concentration, due to increase in the alloy’s hardness, significantly reduced cracking was observed in DS Rene 80 compared to the conventionally cast IN738 welded under the same conditions, despite its hardness being higher than that of IN738. This was related to the nature of base-metal grain- boundary intersections at the fusion-zone boundary in these materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. A. Neidel, S. Riesenbeck, T. Ullrich, J. Volker, C. Yao: Materialpruefung/Mater. Test., 2005, vol. 47 (10), pp. 553–59
2. M. Raguet, S.D. Antolovich, and R.K. Payne: Proc. Superalloys Conf. 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., TMS, Warrendale, PA, 1984, pp. 231–4110.7449/1984/Superalloys_1984_231_241 ↗
3. R.E. Allen and J.E. Sidenstick: Proc. ASME Century 2 Aerospace Conf., San Francisco, CA, Aug. 13–15, 1980, American Society of Mechanical Engineers, New York, NY, 1980, pp. 1–7.
4. R.C. Reed: The Superalloys—Fundamentals and Applications, 1st ed., Cambridge University Press, Cambridge, United Kingdom, 2006, pp. 1–2910.1017/CBO9780511541285 ↗
5. Y.G. Nakagawa, A. Ohtomo, Y. Saiga: Trans. Jpn. Inst. Met., 1976, vol. 17, pp. 323–29.10.2320/matertrans1960.17.323 ↗
6. M. Prager and C.S. Shira: Weld. Res. Counc. Bull. No. 128, 1962, pp. 1–55
7. R. Thamburaj, W. Wallace, J.A. Goldak: Int. Met. Rev., 1983, vol. 28 (1), pp. 1–2210.1179/imr.1983.28.1.1 ↗
8. M. Prager and G. Sines: Weld. Res. Counc. Bull. No. 150, 1970, pp. 24–32
9. W.A. Owczarski, D.S. Duvall, C.P. Sullivan: Weld. J., 1966, vol. 45, pp. 145s–155s
10. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Mater. Sci. Technol., 2004, vol. 20, pp. 1027–3410.1179/026708304225019948 ↗
11. R.K. Sidhu, N.L. Richards, M.C. Chaturvedi: Mater. Sci. Technol., 2005, vol. 21 (10), pp. 1119–3110.1179/174328405X62279 ↗
12. B. Jahnke: Weld. J., 1982, vol. 61, pp. 343s–347s
13. D.S. Duvall, W.A. Owczarski: Weld. J., 1969, vol. 48, pp. 10s–22s
14. L.C. Lim, J.Z. Yi, N. Liu, Q. Ma: Mater. Sci. Technol., 2002, vol. 18 (4), pp. 407–1210.1179/026708302225001633 ↗
15. R.K. Sidhu, N.L. Richards, M.C. Chaturvedi: Mater. Sci. Technol., 2007, vol. 23 (2), pp. 203–1310.1179/174328406X131055 ↗
16. R. Watanabe, T. Kuno: J. Iron Steel Inst. Jpn., 1975, vol. 61 (9), pp. 2274–9410.2355/tetsutohagane1955.61.9_2274 ↗
17. R.K. Sidhu, O.A. Ojo, M.C. Charturvedi: J. Mater. Sci., 2008, vol. 43 (10), pp. 3612–1710.1007/s10853-008-2575-4 ↗
18. M.J. Cieslak, J.J. Stephens, M.J. Carr: Metall. Trans. A, 1988, vol. 19A, pp. 657–6710.1007/BF02649280 ↗
19. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Scripta Mater., 2004, vol. 51, pp. 683–8810.1016/j.scriptamat.2004.06.013 ↗
20. H.R. Zhang, O.A. Ojo: J. Mater. Sci., 2008, vol. 43 (17), pp. 6024–2810.1007/s10853-008-2886-5 ↗
21. H.E. Collins: Metall. Trans., 1974, vol. 5, pp. 189–20410.1007/BF02642943 ↗
22. M.J. Donachie, S.J. Donachie: Superalloys—A Technical Guide, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2002, pp. 211–8610.31399/asm.tb.stg2.t61280211 ↗
23. H.R. Zhang, O.A. Ojo, M.C. Chaturvedi: Scripta Mater., 2008, vol. 58, pp. 167–7010.1016/j.scriptamat.2007.09.049 ↗
24. S.M. Seo, I.S. Kim, J.H. Lee, C.Y. Jo, H. Miyahara, K. Ogi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 883–9310.1007/s11661-007-9090-0 ↗
25. S.T. Wlodek, M. Kelly, and D.A. Alden: Proc. Superalloys Conf. 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Seven Springs, PA, 1996, pp. 129–3610.7449/1996/Superalloys_1996_129_136 ↗
26. J.J. Pepe, W.F. Savage: Weld J., 1967, vol. 46, pp. 411s–422s
27. B. Radhakrishnan, R.G. Thompson: Metall. Trans. A, 1993, vol. 24A, pp. 1409–1510.1007/BF02668209 ↗
28. R. Nakkalil, N.L. Richards, M.C. Chaturvedi: Scripta Metall. Mater., 1992, vol. 26, pp. 1599–160310.1016/0956-716X(92)90263-E ↗
29. O.A. Ojo, M.C. Chaturvedi: Mater. Sci. Eng. A, 2005, vol. 403, pp. 77–8610.1016/j.msea.2005.04.034 ↗
30. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Scripta Mater., 2004, vol. 50, pp. 641–4610.1016/j.scriptamat.2003.11.025 ↗
31. G.S. Hillier and H.K.D.H. Bhadeshia: Proc. Sheffield Centenary Conf. Perspectives in Metallurgical Developments, Sheffield, England, The Metals Society, London, 1984, pp. 183–87
32. D.L. Sponseller: Proc. Superalloys Conf. 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 259–7010.7449/1996/Superalloys_1996_259_270 ↗
33. R.T. Holt, W. Wallace: Int. Met. Rev., 1976, vol. 21, pp. 1–24
34. N.L. Richards, M.C. Chaturvedi: Int. Mater. Rev., 2000, vol. 45, pp. 109–2910.1179/095066000101528331 ↗
35. W.A. Owczarski, D.S. Duvall, C.P. Sullivan: Weld. J., 1967, vol. 46, pp. 423s–432s
36. X. Huang, M.C. Chaturvedi, N.L. Richards, J. Jackman: Acta Mater., 1997, vol. 45, pp. 3095–310710.1016/S1359-6454(97)00017-7 ↗
37. H.J. Goldschmidt: J. Iron Steel Inst., 1971, vol. 209, pp. 910–11
38. W. Chen, M.C. Chaturvedi, N.L. Richards, G. McMahon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1947–5410.1007/s11661-998-0020-6 ↗
39. L. Karlsson, H. Norden: Acta Metall., 1988, vol. 36, pp. 35–3810.1016/0001-6160(88)90026-0 ↗
40. M. Kurban, U. Erb, K.T. Aust: Scripta Mater., 2006, vol. 54, pp. 1053–5810.1016/j.scriptamat.2005.11.055 ↗
41. P. Maitrepierre, J. Rofes-Vernis, and D. Thivellier: Boron in Steel, Proc. Int. Symp. Boron Steels, S.K. Banerji and J.E. Morral, eds., TMS-AIME, New York, NY, 1980, pp. 1–6
42. A. Oradei-Basile, J.F. Radavich: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 325–5510.7449/1991/Superalloys_1991_325_335 ↗
43. R.G. Thompson, D.E. Mayo, B. Radhakrishnan: Metall. Trans. A, 1991, vol. 22A, pp. 557–6210.1007/BF02656823 ↗
44. R. Nakkalil, N.L. Richards, M.C. Chaturvedi: Metall. Trans. A, 1993, vol. 24A, pp. 1169–7910.1007/BF02657248 ↗
45. W.A. Owczarski: Effects of Minor Elements on the Weldability of High-Nickel Alloys, Welding Research Council, New York, NY, 1969, pp. 6–23
46. A.N. Aronson: Master’s Thesis, Rensselaer Polytechnique Inst., Troy, New York, NY, 1963
47. H.A. Shahsavari, A.H. Kokabi, S. Nategh: Mater. Sci. Technol., 2007, vol. 23 (5), pp. 547–5510.1179/174328407X179539 ↗
48. N. Czech, F. Staif, V.S. Savchenko, and K.A. Yushchenko: Proc. Joining and Repair of Gas Turbine Components, Indianapolis, IN, Sept. 15–18, 1997, pp. 7–10
49. R.G. Thompson: J. Met., 1988, vol. 7, pp. 44–48
50. R.K. Sidhu, O.A. Ojo, M.C. Chaturvedi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 858–7010.1007/s11661-006-9063-8 ↗