Optimization of Blended-Elemental Powder-Based Titanium Alloy Extrusions for Aerospace Applications
Source abstract
Abstract
The process of canless extrusion in ambient environment, using cold isostatic pressed, and vacuum-sintered, direct-consolidated blended-elemental hydrided ADMA titanium powder, mixed with master alloy powder for the Ti-6Al-4V composition, has been successfully demonstrated. However, these initially processed unoptimized powder-based extrusions also exhibited oxygen content of about 3000 ppm, within the ASTM B817 Standard, but exceeding the AMS Specification 4935 maximum limit of 2000 ppm, and with pre-extrusion residual hydrogen within 300–500 ppm resulting in post-extrusion void nucleation aligned with the extrusion direction. Additional optimization of extrusion billets during the CIP-and-sintering steps has been successfully demonstrated reducing both oxygen and hydrogen contents to levels at or below the AMS Specification limits for Ti-6Al-4V composition (oxygen content of 2000 ppm maximum, and hydrogen content of 125 ppm maximum). Processing-microstructure-property correlations of the optimized, AMS-4935-Specification-conformant, Ti-6Al-4V blended-elemental powder-based product form exhibited an overall mechanical property balance matching that of double-arc-remelted ingot-based extrusions. Property matching was not only in terms of static mechanical properties (room-temperature tensile properties, and monotonic fracture toughness K IC (K Q) values), but also in terms of dynamic fatigue properties (combined S/N plus da/dN properties), as well as stress-corrosion resistance, as measured in terms of K ISCC threshold values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. S.M. El-Soudani: Block Release Reports, The Boeing Company, Huntington Beach, CA, Internal Reports Dated: 11/27/2009, 12/22/2010.
2. US Patent 6,638,336 B1, 2003.10.1016/S1351-4180(03)00541-5 ↗
3. Ukrainian Patent 51917, 2002.
4. Ukrainian Patent 65, 654, 2004.10.1177/004056390406500322 ↗
5. Ukrainian Patent 70366, 2004.
6. Ukrainian Patent 56116A, 2003.
7. Ukrainian Patent 56117A, 2003.
8. US Patent 11,811,578, 2011.
9. US Patent 7,311,873 B2 11/026197, 2007.10.1016/S0969-6210(07)70166-2 ↗
10. US Patent 12,317,791, 2011.
11. US Patent 12/655,937, 2010.10.1007/s12445-010-0334-7 ↗
12. S.M. El-Soudani, M.B. Campbell, J.J. Phillips, V. Moxson, and V. Duz: Aeromat 2008, Boeing-Plymouth-ADMA Presentation, ASM International Conference, Austin, TX, 2008.
13. S.M. El-Soudani, O. Yu, F. Sun, A. Keskar, V. Moxson, and V. Duz: Aeromat 2008, Boeing-RTI-ADMA Presentation, ASM International Conference, Austin, TX, 2008.
14. S.M. El-Soudani, O. Yu, F. Sun, M.B. Campbell, T.S. Esposito, J.J. Phillips, V. Moxson, and V. Duz: The International Titanium Association (ITA) Conference, Boeing-RTI-Plymouth-ADMA Presentation, Las Vegas, Nevada, 2008.
15. S.M. El-Soudani, O. Yu, F. Sun, M.B. Campbell, T.S. Esposito, J.J. Phillips, V. Moxson, and V. Duz: Boeing-RTI-Plymouth-ADMA Presentation, The Minerals, Metals and Materials Society (TMS) Conference, San Francisco, CA, 2009.
16. S.M. El-Soudani, O. Yu, F. Sun, M.B. Campbell, T.S. Esposito, J.J. Phillips, V. Moxson, and V. Duz: Boeing-RTI-Plymouth-ADMA Presentation, Metal Powder Industries Federation (MPIF) Conference, Las Vegas, Nevada, 2009.
17. S.M. El-Soudani, O. Yu, F. Sun, M.B. Campbell, T.S. Esposito, J.J. Phillips, V. Moxson, and V. Duzz: Aeromat 2009, Boeing-RTI-Plymouth-ADMA Presentation, ASM International Conference, Dayton, Ohio, 2009.