Correlation between the macroscopic behavior and the microstructural evolutions during large plastic deformation of a dual-phase steel
Source abstract
Abstract
The aim of the present work is the analysis of the evolution of the microstructure and texture of a dualphase steel in connection with the macroscopic behavior. Two-stage sequences are carried out in order to investigate the effect of strain-path changes, both at the macroscopic and the microscopic scales. The goal is the achievement of a more comprehensive explanation of the anisotropic behavior under complex strain-path changes for this type of steel (i.e., dual-phase steels). Transmission electron microscopy (TEM) microstructures as well as X-ray diffraction textures are examined after several sequences of simple shear/simple shear loadings. The evolutions of texture are analyzed through comparison with predictions made with the viscoplastic Taylor-Bishop-Hill (TBH) model; its influence on macroscopic values of stress is also quantified. As for the microstructural evolutions, in all investigated cases, it is clear that the dislocation structures which are formed in various grains are strongly dependent on the orientation of the grain, as in the case of previously investigated steel.[1] However, some differences are observed, compared to a simpler single-phase material, which are explained by the differences observed in the initial state and which are then related to the macroscopic behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. E.V. Nesterova, B. Bacroix, and C. Teodosiu: Metall. Trans. A, 2001, vol. 32A, pp. 2527–38.10.1007/s11661-001-0042-9 ↗
2. E.F. Rauch and C. G’Sell: Mater. Sci. Eng., 1989, vol. A111, pp. 71–80.10.1016/0921-5093(89)90199-8 ↗
3. E.F. Rauch and J.-H. Schmitt: Mater. Sci. Eng. A, 1989, vol. 113, pp. 441–48.10.1016/0921-5093(89)90331-6 ↗
4. B. Bacroix, P. Genevois, and C. Teodosiu: Eur. J. Mech. A/Solids, 1994, vol. 13 (5), pp. 661–75.
5. A.B. Lopes, E.F. Rauch, and J.J. Gracio: Acta Mater., 1999, vol. 47 (3), pp. 859–66.10.1016/S1359-6454(98)00417-0 ↗
6. A. Goel, R.K. Ray, and G.S. Murty: Scripta Metall., 1983, vol. 17 (3), pp. 375–80.10.1016/0036-9748(83)90176-X ↗
7. D.A. Korzekwa, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1984, vol. 15A, pp. 1221–28.10.1007/BF02644716 ↗
8. A.M. Sarosiek and W.S. Owen: Mater. Sci. Eng., 1984, vol. 66, pp. 13–34.10.1016/0025-5416(84)90138-1 ↗
9. A. Bayram, A. Uguz, and M. Ula: Mater. Characterization, 1999, vol. 43 (4), pp. 259–69.10.1016/S1044-5803(99)00044-3 ↗
10. M.H. Saleh and R. Priestner: J. Mater. Processing Technol., 2001, vol. 113 (1–3), pp. 587–93.10.1016/S0924-0136(01)00638-0 ↗
11. A. El-Sesy and Z.M. El-Baradie: Mater. Lett., 2002, vol. 57 (30), pp. 580–85.10.1016/S0167-577X(02)00833-9 ↗
12. X.-L. Cai, A.J. Feng, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 1405–15.10.1007/BF02658673 ↗
13. X.-L. Cai, A.J. Garratt-Reed, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 543–57.10.1007/BF02814228 ↗
14. G.R. Speich, A.J. Schwoeble, and G.P. Huffman: Metall. Trans. A, 1983, vol. 14A, pp. 1079–87.10.1007/BF02659856 ↗
15. K. Jena and M.C. Chaturvedi: Mater. Sci. Eng., 1988, vol. 100, pp. 1–6.10.1016/0025-5416(88)90232-7 ↗
16. A. Bhattacharyya, T. Sakaki, and G.J. Weng: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 301–14.10.1007/BF02657317 ↗
17. S. Kim and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1753–60.10.1007/s11661-998-0328-2 ↗
18. R.-K. Ray: Mater. Sci. Eng., 1986, vol 77, pp. 169–74.10.1016/0025-5416(86)90365-4 ↗
19. 3DS Report: “18-Month LPMTM-Progress Report, Digital Die Design Systems,” IMS1999000051 contract, LPMTM-CNRS, University Paris 13, France, 2001.
20. B. Bacroix and Z. Hu: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 601–13.10.1007/BF02663909 ↗
21. V. Richard, T. Chauveau, and W. Swiatnicki: Internal Report, LPMTM-CNRS, University Paris 13, France, 2000.
22. Z. Hu, E.F. Rauch, and C. Teodosiu: Int. J. Plasticity, 1992, vol. 8, pp. 839–56.10.1016/0749-6419(92)90006-X ↗
23. G. Vincze, E.F. Rauch, J.J. Gracio, F. Barlat, and A.B. Lopes: Acta Mater., 2005, vol. 53, pp. 1005–13.10.1016/j.actamat.2004.10.046 ↗
24. D. Boscher: Ph.D. Thesis, University Paris 13, France, 2004.
25. P. van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plas., 2005, vol. 21 (3), pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
26. G. Winther, X. Huang, and N. Hansen: Acta Mater., 2000, vol. 48, pp. 2187–98.10.1016/S1359-6454(00)00027-6 ↗
27. B. Bacroix, E.V. Nesterova, and C. Teodosiu: Proc. Int. Conf. Plasticity 2002, A.S. Khan and O. Lopez-Pamies, eds., Neat Press et Fulton, Aruba, 2002, pp. 292–94.
28. A. Haldar, X. Huang, T. Leffers, N. Hansen, and R.K. Ray: Acta Mater., 2004, vol. 52, pp. 5405–18.10.1016/j.actamat.2004.08.004 ↗
29. B. Peeters, B. Bacroix, C. Teodosiu, P. van Houtte, and E. Aernoudt: Acta Mater., 2001, vol. 49 (9), pp. 1621–32.10.1016/S1359-6454(01)00067-2 ↗
30. R. Brenner, R. Masson, O. Castelnau, and A. Zaoui: Eur. J. Mech.-A/Solids, 2002, vol. 21 (6), pp. 943–60.10.1016/S0997-7538(02)01247-0 ↗
31. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter: Int J. Plas., 2000, vol. 16 (7–8), pp. 723–48.10.1016/S0749-6419(99)00078-9 ↗
32. T. Iwamoto: Int. J. Plas., 2004, vol. 20, pp. 841–69.10.1016/j.ijplas.2003.05.002 ↗
33. B. Gardey, S. Bouvier, V. Richard, and B. Bacroix: Mater. Sci. Eng. A, 2005, 400–401, pp. 136–41.10.1016/j.msea.2005.01.066 ↗
34. E. Nesterova: Internal Report, LPMTM-CNRS, University Paris 13, France, 2002.